Hi Stefan,
On Tue, 22 May 2018 14:07:06 +0200
Stefan Agner <stefan@xxxxxxxx> wrote:
> +
> +struct tegra_nand {
> + void __iomem *regs;
> + struct clk *clk;
> + struct gpio_desc *wp_gpio;
> +
> + struct nand_chip chip;
> + struct device *dev;
> +
> + struct completion command_complete;
> + struct completion dma_complete;
> + bool last_read_error;
> +
> + dma_addr_t data_dma;
> + void *data_buf;
> + dma_addr_t oob_dma;
> + void *oob_buf;
> +
> + int cur_chip;
> +};
This struct should be split in 2 structures: one representing the NAND
controller and one representing the NAND chip:
struct tegra_nand_controller {
struct nand_hw_control base;
void __iomem *regs;
struct clk *clk;
struct device *dev;
struct completion command_complete;
struct completion dma_complete;
bool last_read_error;
int cur_chip;
};
struct tegra_nand {
struct nand_chip base;
dma_addr_t data_dma;
void *data_buf;
dma_addr_t oob_dma;
void *oob_buf;
};
> +
> +static inline struct tegra_nand *to_tegra_nand(struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd_to_nand(mtd);
> +
> + return nand_get_controller_data(chip);
then you can just do:
return container_of(chip, struct tegra_nand, base);
> +}
> +
> +static int tegra_nand_ooblayout_16_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + if (section > 0)
> + return -ERANGE;
> +
> + oobregion->offset = 4;
> + oobregion->length = 4;
> +
> + return 0;
> +}
> +
> +static int tegra_nand_ooblayout_16_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + if (section > 0)
> + return -ERANGE;
> +
> + oobregion->offset = 8;
> + oobregion->length = 8;
> +
> + return 0;
> +}
...
> +
> +static int tegra_nand_ooblayout_224_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + if (section > 0)
> + return -ERANGE;
> +
> + oobregion->offset = 4;
> + oobregion->length = 144;
> +
> + return 0;
> +}
> +
> +static int tegra_nand_ooblayout_224_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + if (section > 0)
> + return -ERANGE;
> +
> + oobregion->offset = 148;
> + oobregion->length = 76;
> +
> + return 0;
> +}
> +
> +static const struct mtd_ooblayout_ops tegra_nand_oob_224_ops = {
> + .ecc = tegra_nand_ooblayout_224_ecc,
> + .free = tegra_nand_ooblayout_224_free,
> +};
> +
I'm pretty sure we can find a pattern here to avoid defining a new
mtd_ooblayout_ops for each OOB size.
> +static irqreturn_t tegra_nand_irq(int irq, void *data)
> +{
> + struct tegra_nand *nand = data;
> + u32 isr, dma;
> +
> + isr = readl(nand->regs + ISR);
> + dma = readl(nand->regs + DMA_CTRL);
> + dev_dbg(nand->dev, "isr %08x\n", isr);
> +
> + if (!isr && !(dma & DMA_CTRL_IS_DONE))
> + return IRQ_NONE;
> +
> + if (isr & ISR_CORRFAIL_ERR)
> + nand->last_read_error = true;
> +
> + if (isr & ISR_CMD_DONE)
> + complete(&nand->command_complete);
> +
> + if (isr & ISR_UND)
> + dev_dbg(nand->dev, "FIFO underrun\n");
> +
> + if (isr & ISR_OVR)
> + dev_dbg(nand->dev, "FIFO overrun\n");
> +
> + /* handle DMA interrupts */
> + if (dma & DMA_CTRL_IS_DONE) {
> + writel(dma, nand->regs + DMA_CTRL);
> + complete(&nand->dma_complete);
> + }
> +
> + /* clear interrupts */
> + writel(isr, nand->regs + ISR);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int tegra_nand_cmd(struct nand_chip *chip,
> + const struct nand_subop *subop)
> +{
> + const struct nand_op_instr *instr;
> + const struct nand_op_instr *instr_data_in = NULL;
> + struct mtd_info *mtd = nand_to_mtd(chip);
> + struct tegra_nand *nand = to_tegra_nand(mtd);
> + unsigned int op_id = -1, trfr_in_sz = 0, trfr_out_sz = 0, offset = 0;
> + bool first_cmd = true;
> + bool force8bit;
> + u32 cmd = 0;
> + u32 value;
> +
> + for (op_id = 0; op_id < subop->ninstrs; op_id++) {
> + unsigned int naddrs, i;
> + const u8 *addrs;
> + u32 addr1 = 0, addr2 = 0;
> +
> + instr = &subop->instrs[op_id];
> +
> + switch (instr->type) {
> + case NAND_OP_CMD_INSTR:
> + if (first_cmd) {
> + cmd |= CMD_CLE;
> + writel(instr->ctx.cmd.opcode, nand->regs + CMD_1);
> + } else {
> + cmd |= CMD_SEC_CMD;
> + writel(instr->ctx.cmd.opcode, nand->regs + CMD_2);
> + }
> + first_cmd = false;
> + break;
> + case NAND_OP_ADDR_INSTR:
> + offset = nand_subop_get_addr_start_off(subop, op_id);
> + naddrs = nand_subop_get_num_addr_cyc(subop, op_id);
> + addrs = &instr->ctx.addr.addrs[offset];
> +
> + cmd |= CMD_ALE | CMD_ALE_SIZE(naddrs);
> + for (i = 0; i < min_t(unsigned int, 4, naddrs); i++)
> + addr1 |= *addrs++ << (8 * i);
> + naddrs -= i;
> + for (i = 0; i < min_t(unsigned int, 4, naddrs); i++)
> + addr2 |= *addrs++ << (8 * i);
> + writel(addr1, nand->regs + ADDR_1);
> + writel(addr2, nand->regs + ADDR_2);
> + break;
> +
> + case NAND_OP_DATA_IN_INSTR:
> + trfr_in_sz = nand_subop_get_data_len(subop, op_id);
> + offset = nand_subop_get_data_start_off(subop, op_id);
> +
> + cmd |= CMD_TRANS_SIZE(trfr_in_sz) | CMD_PIO | CMD_RX | CMD_A_VALID;
> +
> + instr_data_in = instr;
> + break;
> +
> + case NAND_OP_DATA_OUT_INSTR:
> + trfr_out_sz = nand_subop_get_data_len(subop, op_id);
> + offset = nand_subop_get_data_start_off(subop, op_id);
> + trfr_out_sz = min_t(size_t, trfr_out_sz, 4);
> +
> + cmd |= CMD_TRANS_SIZE(trfr_out_sz) | CMD_PIO | CMD_TX | CMD_A_VALID;
> +
> + memcpy(&value, instr->ctx.data.buf.out + offset, trfr_out_sz);
> + writel(value, nand->regs + RESP);
> +
> + break;
> + case NAND_OP_WAITRDY_INSTR:
> + cmd |= CMD_RBSY_CHK;
> + break;
> +
> + }
> + }
> +
> +
> + cmd |= CMD_GO | CMD_CE(nand->cur_chip);
> + writel(cmd, nand->regs + CMD);
> + wait_for_completion(&nand->command_complete);
> +
> + if (instr_data_in) {
> + u32 value;
> + size_t n = min_t(size_t, trfr_in_sz, 4);
> +
> + value = readl(nand->regs + RESP);
> + memcpy(instr_data_in->ctx.data.buf.in + offset, &value, n);
> + }
> +
> + return 0;
> +}
> +
> +static const struct nand_op_parser tegra_nand_op_parser = NAND_OP_PARSER(
> + NAND_OP_PARSER_PATTERN(tegra_nand_cmd,
> + NAND_OP_PARSER_PAT_CMD_ELEM(true),
> + NAND_OP_PARSER_PAT_ADDR_ELEM(true, 8),
> + NAND_OP_PARSER_PAT_CMD_ELEM(true),
> + NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)),
> + NAND_OP_PARSER_PATTERN(tegra_nand_cmd,
> + NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, 4)),
> + NAND_OP_PARSER_PATTERN(tegra_nand_cmd,
> + NAND_OP_PARSER_PAT_CMD_ELEM(true),
> + NAND_OP_PARSER_PAT_ADDR_ELEM(true, 8),
> + NAND_OP_PARSER_PAT_CMD_ELEM(true),
> + NAND_OP_PARSER_PAT_WAITRDY_ELEM(true),
> + NAND_OP_PARSER_PAT_DATA_IN_ELEM(true, 4)),
> + );
> +
> +static int tegra_nand_exec_op(struct nand_chip *chip,
> + const struct nand_operation *op,
> + bool check_only)
> +{
> + return nand_op_parser_exec_op(chip, &tegra_nand_op_parser, op,
> + check_only);
> +}
Missing empty line here.
> +static void tegra_nand_select_chip(struct mtd_info *mtd, int chip)
> +{
> + struct tegra_nand *nand = to_tegra_nand(mtd);
> +
> + nand->cur_chip = chip;
> +}
...
> +
> +static void tegra_nand_setup_chiptiming(struct tegra_nand *nand)
> +{
> + struct nand_chip *chip = &nand->chip;
> + int mode;
> +
> + mode = onfi_get_async_timing_mode(chip);
> + if (mode == ONFI_TIMING_MODE_UNKNOWN)
> + mode = chip->onfi_timing_mode_default;
> + else
> + mode = fls(mode);
> +
> + tegra_nand_setup_timing(nand, mode);
Hm, you shouldn't do that. Let the core select the timing mode for you,
and just implement the ->setup_data_interface() hook.
> +}
> +
> +static int tegra_nand_probe(struct platform_device *pdev)
> +{
> + struct reset_control *rst;
> + struct tegra_nand *nand;
> + struct nand_chip *chip;
> + struct mtd_info *mtd;
> + struct resource *res;
> + unsigned long value;
> + int irq, err = 0;
> +
> + nand = devm_kzalloc(&pdev->dev, sizeof(*nand), GFP_KERNEL);
> + if (!nand)
> + return -ENOMEM;
> +
> + nand->dev = &pdev->dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + nand->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(nand->regs))
> + return PTR_ERR(nand->regs);
> +
> + irq = platform_get_irq(pdev, 0);
> + err = devm_request_irq(&pdev->dev, irq, tegra_nand_irq, 0,
> + dev_name(&pdev->dev), nand);
> + if (err)
> + return err;
> +
> + rst = devm_reset_control_get(&pdev->dev, "nand");
> + if (IS_ERR(rst))
> + return PTR_ERR(rst);
> +
> + nand->clk = devm_clk_get(&pdev->dev, "nand");
> + if (IS_ERR(nand->clk))
> + return PTR_ERR(nand->clk);
> +
> + nand->wp_gpio = gpiod_get_optional(&pdev->dev, "wp-gpios",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(nand->wp_gpio))
> + return PTR_ERR(nand->wp_gpio);
> +
> + err = clk_prepare_enable(nand->clk);
> + if (err)
> + return err;
> +
> + reset_control_assert(rst);
> + udelay(2);
> + reset_control_deassert(rst);
> +
> + value = HWSTATUS_RDSTATUS_MASK(1) | HWSTATUS_RDSTATUS_VALUE(0) |
> + HWSTATUS_RBSY_MASK(NAND_STATUS_READY) |
> + HWSTATUS_RBSY_VALUE(NAND_STATUS_READY);
> + writel(NAND_CMD_STATUS, nand->regs + HWSTATUS_CMD);
> + writel(value, nand->regs + HWSTATUS_MASK);
> +
> + init_completion(&nand->command_complete);
> + init_completion(&nand->dma_complete);
> +
> + /* clear interrupts */
> + value = readl(nand->regs + ISR);
> + writel(value, nand->regs + ISR);
> +
> + writel(DMA_CTRL_IS_DONE, nand->regs + DMA_CTRL);
> +
> + /* enable interrupts */
> + value = IER_UND | IER_OVR | IER_CMD_DONE | IER_ECC_ERR | IER_GIE;
> + writel(value, nand->regs + IER);
> +
> + /* reset config */
> + writel(0, nand->regs + CFG);
> +
> + chip = &nand->chip;
> + mtd = nand_to_mtd(chip);
> +
> + mtd->dev.parent = &pdev->dev;
> + mtd->name = "tegra_nand";
> + mtd->owner = THIS_MODULE;
> +
> + nand_set_flash_node(chip, pdev->dev.of_node);
> + nand_set_controller_data(chip, nand);
> +
> + chip->options = NAND_NO_SUBPAGE_WRITE;
> + chip->exec_op = tegra_nand_exec_op;
> + chip->select_chip = tegra_nand_select_chip;
> + tegra_nand_setup_timing(nand, 0);
> +
> + err = nand_scan_ident(mtd, 1, NULL);
> + if (err)
> + goto err_disable_clk;
> +
> + if (chip->bbt_options & NAND_BBT_USE_FLASH)
> + chip->bbt_options |= NAND_BBT_NO_OOB;
> +
> + nand->data_buf = dmam_alloc_coherent(&pdev->dev, mtd->writesize,
> + &nand->data_dma, GFP_KERNEL);
> + if (!nand->data_buf) {
> + err = -ENOMEM;
> + goto err_disable_clk;
> + }
> +
> + nand->oob_buf = dmam_alloc_coherent(&pdev->dev, mtd->oobsize,
> + &nand->oob_dma, GFP_KERNEL);
> + if (!nand->oob_buf) {
> + err = -ENOMEM;
> + goto err_disable_clk;
> + }
> +
> + chip->ecc.mode = NAND_ECC_HW;
> + chip->ecc.size = 512;
> + chip->ecc.read_page = tegra_nand_read_page;
> + chip->ecc.write_page = tegra_nand_write_page;
I'd like to have raw accessors implemented here.
That was just a quick review focusing mainly on architectural issues so
that you can start working on a v2.
Regards,
Boris
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
