On 20.04.2018 11:52, Marc Dietrich wrote:
> Hi Marcel,
>
> Am Montag, 19. Februar 2018, 16:12:52 CEST schrieb Marcel Ziswiler:
>> From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>>
>> Since commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting
>> during registration") ULPI has been broken on Tegra20 leading to the
>> following error message during boot:
>>
>> [ 1.974698] ulpi_phy_power_on: ulpi write failed
>> [ 1.979384] tegra-ehci c5004000.usb: Failed to power on the phy
>> [ 1.985434] tegra-ehci: probe of c5004000.usb failed with error -110
>>
>> Debugging through the changes and finally also consulting the TRM
>> revealed that rather than the CDEV2 clock off OSC requiring such pin
>> muxing actually the PLL_P_OUT4 clock is in use. It looks like so far it
>> just worked by chance of that one having been enabled which Stephen's
>> commit now changed when reparenting sclk away from pll_p_out4 leaving
>> that one disabled. Fix this by properly assigning the PLL_P_OUT4 clock
>> as the ULPI PHY clock.
>
> I booted 4.17-rc1 (which includes this fix) on an AC100 (T20 paz00 board) and
> the error above is still there. Surprisingly the error vanishes when I revert
> your patch. So this patch actually *causes* the problem above on my board.
> Could it be, that we need all four clocks? Dimitry mentioned on IRC that it
> could also be a problem in the clock init table. I don't have the technical
> background myself to fix it, but I still wonder what could be so different
> between TrimSlice and AC100.
I managed to find CDEV clocks in TRM this time. Seems assigning CDEV2 clock to
"ulpi-link" was correct and both CDEV2 and PLL_P_OUT4 should be enabled, CDEV2
should gate the PLL_P_OUT4 that feeds USB HW and PLL_P_OUT4 should be
always-enabled because it is enabled by init_table, but apparently it is getting
disabled erroneously.
Marcel, could you please revert your patch, add
"trace_event=clk_enable,clk_disable,clk_set_parent tp_printk" to kernels cmdline
and post the log?
It looks like there is some clk framework bug, but just in case please also try
to apply this patch:
diff --git a/drivers/clk/tegra/clk-tegra-periph.c
b/drivers/clk/tegra/clk-tegra-periph.c
index 2acba2986bc6..407bd0c0ac2f 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -1024,7 +1024,7 @@ static void __init init_pllp(void __iomem *clk_base, void
__iomem *pmc_base,
if (dt_clk) {
clk = tegra_clk_register_pll_out("pll_p_out4",
"pll_p_out4_div", clk_base + PLLP_OUTB,
- 17, 16, CLK_IGNORE_UNUSED |
+ 17, 16, CLK_IS_CRITICAL |
CLK_SET_RATE_PARENT, 0,
&PLLP_OUTB_lock);
*dt_clk = clk;
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
