From: Preetham Ramchandra <pchandru@xxxxxxxxxx> 1. ADD AHCI support for Tegra210 2. Extend the Tegra AHCI controller device tree binding with Tegra210 3. Update initialization sequence 4. Initialize regulators based on chip 5. Disable DevSlp 6. Disable DIPM --- Preetham Ramchandra (9): dt-bindings: Tegra210: add binding documentation arm64: tegra: Add SATA node for Tegra210 arm64: tegra: Enable AHCI on Jetson TX1 ata: ahci_tegra: Update initialization sequence ata: ahci_tegra: initialize regulators from soc struct ata: ahci_tegra: disable devslp for Tegra124 ata: ahci_tegra: disable DIPM ata: ahci_tegra: Add AHCI support for Tegra210 ata: change Tegra124 to Tegra .../bindings/ata/nvidia,tegra124-ahci.txt | 36 ++- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 5 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 16 + drivers/ata/Kconfig | 4 +- drivers/ata/ahci_tegra.c | 359 ++++++++++++++++----- 5 files changed, 330 insertions(+), 90 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
