On Thu, Mar 08, 2018 at 10:50:06PM +0000, Jon Hunter wrote:
>
> On 06/02/18 16:34, Peter De Schrijver wrote:
> > This patch prepares the dfll driver to work with PWM regulators.
> > To do this we introduce a new array lut_uv which gives the voltage for
> > a given index generated by the dfll logic. This index will then be
> > translated to a PMIC voltage ID in case of I2C using the i2c_lut. In case
> > of a PWM regulator, it will be used to determine the PWM duty cycle.
> > We also introduce lut_bottom which holds the lowest voltage we will ever
> > need. In case of I2C this can be set to zero because the i2c_lut will be
> > initialized such that entry 0 will be the lowest voltage we will ever
> > need. In case of PWM, the lowest voltage is determined by the regulator
> > hardware so we need this software limit. Note that this is different
> > from lut_min which gives the lowest voltage we allow taking temperature
> > into account. In a future patchset we will update lut_vmin dynamically.
> > Similarly lut_max will be the highest voltage allowed taking temperature
> > into accouint. Also this will be updated dynamically once temperature
> > dependence will be introduced.
> >
> > Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> > ---
> > drivers/clk/tegra/clk-dfll.c | 62 ++++++++++++++++++++++++++------------------
> > 1 file changed, 37 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> > index 0a7deee..fa97763 100644
> > --- a/drivers/clk/tegra/clk-dfll.c
> > +++ b/drivers/clk/tegra/clk-dfll.c
> > @@ -301,9 +301,10 @@ struct tegra_dfll {
> > u32 i2c_slave_addr;
> >
> > /* i2c_lut array entries are regulator framework selectors */
> > - unsigned i2c_lut[MAX_DFLL_VOLTAGES];
> > - int i2c_lut_size;
> > - u8 lut_min, lut_max, lut_safe;
> > + unsigned int i2c_lut[MAX_DFLL_VOLTAGES];
> > + unsigned int lut_uv[MAX_DFLL_VOLTAGES];
> > + int lut_size;
> > + u8 lut_bottom, lut_min, lut_max, lut_safe;
> > };
> >
> > #define clk_hw_to_dfll(_hw) container_of(_hw, struct tegra_dfll, dfll_clk_hw)
> > @@ -531,10 +532,10 @@ static void dfll_load_i2c_lut(struct tegra_dfll *td)
> > u32 val;
> >
> > for (i = 0; i < MAX_DFLL_VOLTAGES; i++) {
> > - if (i < td->lut_min)
> > - lut_index = td->lut_min;
> > - else if (i > td->lut_max)
> > - lut_index = td->lut_max;
> > + if (i < td->lut_bottom)
> > + lut_index = td->lut_bottom;
> > + else if (i > td->lut_size - 1)
> > + lut_index = td->lut_size - 1;
> > else
> > lut_index = i;
> >
> > @@ -594,9 +595,9 @@ static void dfll_init_out_if(struct tegra_dfll *td)
> > {
> > u32 val;
> >
> > - td->lut_min = 0;
> > - td->lut_max = td->i2c_lut_size - 1;
> > - td->lut_safe = td->lut_min + 1;
> > + td->lut_min = td->lut_bottom;
> > + td->lut_max = td->lut_size - 1;
> > + td->lut_safe = td->lut_min + (td->lut_min < td->lut_max ? 1 : 0);
> >
> > dfll_i2c_writel(td, 0, DFLL_OUTPUT_CFG);
> > val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
> > @@ -619,11 +620,11 @@ static void dfll_init_out_if(struct tegra_dfll *td)
> > */
> >
> > /**
> > - * find_lut_index_for_rate - determine I2C LUT index for given DFLL rate
> > + * find_lut_index_for_rate - determine LUT index for given DFLL rate
> > * @td: DFLL instance
> > * @rate: clock rate
> > *
> > - * Determines the index of a I2C LUT entry for a voltage that approximately
> > + * Determines the index of a LUT entry for a voltage that approximately
> > * produces the given DFLL clock rate. This is used when forcing a value
> > * to the integrator during rate changes. Returns -ENOENT if a suitable
> > * LUT index is not found.
> > @@ -637,11 +638,11 @@ static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
> > if (IS_ERR(opp))
> > return PTR_ERR(opp);
> >
> > - uv = dev_pm_opp_get_voltage(opp);
> > + uv = dev_pm_opp_get_voltage(opp) / td->soc->alignment.step_uv;
> > dev_pm_opp_put(opp);
> >
> > - for (i = 0; i < td->i2c_lut_size; i++) {
> > - if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
> > + for (i = td->lut_bottom; i < td->lut_size; i++) {
> > + if ((td->lut_uv[i] / td->soc->alignment.step_uv) >= uv)
> > return i;
> > }
> >
> > @@ -1377,15 +1378,17 @@ static int dfll_init(struct tegra_dfll *td)
> > */
> > static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
> > {
> > - int i, n_voltages, reg_uV;
> > + int i, n_voltages, reg_mult, align_mult;
> >
> > + align_mult = uV / td->soc->alignment.step_uv;
> > n_voltages = regulator_count_voltages(td->vdd_reg);
> > for (i = 0; i < n_voltages; i++) {
> > - reg_uV = regulator_list_voltage(td->vdd_reg, i);
> > - if (reg_uV < 0)
> > + reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> > + td->soc->alignment.step_uv;
> > + if (reg_mult < 0)
> > break;
> >
> > - if (uV == reg_uV)
> > + if (align_mult == reg_mult)
> > return i;
> > }
> >
> > @@ -1399,15 +1402,17 @@ static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
> > * */
> > static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
> > {
> > - int i, n_voltages, reg_uV;
> > + int i, n_voltages, reg_mult, align_mult;
> >
> > + align_mult = uV / td->soc->alignment.step_uv;
> > n_voltages = regulator_count_voltages(td->vdd_reg);
> > for (i = 0; i < n_voltages; i++) {
> > - reg_uV = regulator_list_voltage(td->vdd_reg, i);
> > - if (reg_uV < 0)
> > + reg_mult = regulator_list_voltage(td->vdd_reg, i) /
> > + td->soc->alignment.step_uv;
> > + if (reg_mult < 0)
> > break;
> >
> > - if (uV <= reg_uV)
> > + if (align_mult <= reg_mult)
> > return i;
> > }
> >
> > @@ -1450,8 +1455,10 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
> > if (lut < 0)
> > goto out;
> > td->i2c_lut[0] = lut;
> > + td->lut_bottom = 0;
> >
> > for (j = 1, rate = 0; ; rate++) {
> > +
> > opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
> > if (IS_ERR(opp))
> > break;
> > @@ -1484,13 +1491,18 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
> > if (v >= v_max)
> > break;
> > }
> > - td->i2c_lut_size = j;
> > + td->lut_size = j;
> >
> > if (!td->dvco_rate_min)
> > dev_err(td->dev, "no opp above DFLL minimum voltage %d mV\n",
> > td->soc->cvb->min_millivolts);
> > - else
> > + else {
> > ret = 0;
> > + for (j = 0; j < td->lut_size; j++)
> > + td->lut_uv[j] =
> > + regulator_list_voltage(td->vdd_reg,
> > + td->i2c_lut[j]);
> > + }
> >
> > out:
> > return ret;
> >
>
> I am a bit confused by this patch as I don't fully understand from the
> description what is being changed. For example, there are a few places
> where you are dividing by td->soc->alignment.step_uv, which seems to be
> changing the calculations/behaviour for I2C unless I am missing something?
>
The goal is to use td->lut_uv for all voltage related lookups so we can unify
the code for i2c and PWM regulators.
Peter.
> I would also consider renaming lut_bottom and lut_min as something like
> lut_abs_min and lut_cur_min, to indicate that one is the absolute min
> and the other is the current min depending on operating conditions.
>
> Cheers
> Jon
>
> --
> nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
