On 06/02/18 16:34, Peter De Schrijver wrote:
> Tegra210 has a very similar CPU clocking scheme than Tegra124. So add
> support in this driver. Also allow for the case where the CPU voltage is
> controlled directly by the DFLL rather than by a separate regulator object.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
> drivers/cpufreq/tegra124-cpufreq.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
> index 4353025..f8e01a8 100644
> --- a/drivers/cpufreq/tegra124-cpufreq.c
> +++ b/drivers/cpufreq/tegra124-cpufreq.c
> @@ -64,7 +64,8 @@ static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
> {
> clk_set_parent(priv->cpu_clk, priv->pllp_clk);
> clk_disable_unprepare(priv->dfll_clk);
> - regulator_sync_voltage(priv->vdd_cpu_reg);
> + if (priv->vdd_cpu_reg)
> + regulator_sync_voltage(priv->vdd_cpu_reg);
> clk_set_parent(priv->cpu_clk, priv->pllx_clk);
> }
>
> @@ -89,10 +90,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
> return -ENODEV;
>
> priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu");
> - if (IS_ERR(priv->vdd_cpu_reg)) {
> - ret = PTR_ERR(priv->vdd_cpu_reg);
> - goto out_put_np;
> - }
> + if (IS_ERR(priv->vdd_cpu_reg) != -EPROBE_DEFER)
> + priv->vdd_cpu_reg = NULL;
> + else
> + return -EPROBE_DEFER;
I am still not sure that we should rely on the fact that the regulator
is not present in DT to imply that we do not need it. I think that we
should be checking if we are using I2C mode here.
Cheers
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
