On Thu, Feb 22, 2018 at 03:38:25PM +0100, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>
> Since commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting
> during registration") ULPI has been broken on Tegra20 leading to the
> following error message during boot:
>
> [ 1.974698] ulpi_phy_power_on: ulpi write failed
> [ 1.979384] tegra-ehci c5004000.usb: Failed to power on the phy
> [ 1.985434] tegra-ehci: probe of c5004000.usb failed with error -110
>
> Debugging through the changes and finally also consulting the TRM
> revealed that rather than the CDEV2 clock off OSC requiring such pin
> muxing actually the PLL_P_OUT4 clock is in use. It looks like so far it
> just worked by chance of that one having been enabled which Stephen's
> commit now changed when reparenting sclk away from pll_p_out4 leaving
> that one disabled. Fix this by properly assigning the PLL_P_OUT4 clock
> as the ULPI PHY clock.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>
> ---
>
> Changes in v2:
> - Updated device tree binding documentation as well.
> - CCing Dmitry as well.
>
> Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt | 4 +++-
> arch/arm/boot/dts/tegra20.dtsi | 2 +-
> 2 files changed, 4 insertions(+), 2 deletions(-)
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
