>-----Original Message----- >From: Thierry Reding [mailto:thierry.reding@xxxxxxxxx] >Sent: Monday, February 19, 2018 7:55 PM >To: Rob Herring <robh@xxxxxxxxxx> >Cc: Preetham Chandru <pchandru@xxxxxxxxxx>; tj@xxxxxxxxxx; cyndis@xxxxxxxx; >mark.rutland@xxxxxxx; devicetree@xxxxxxxxxxxxxxx; preetham260@xxxxxxxxx; >linux-tegra@xxxxxxxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; Venu Byravarasu ><vbyravarasu@xxxxxxxxxx>; Pavan Kunapuli <pkunapuli@xxxxxxxxxx> >Subject: Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation > >* PGP Signed by an unknown key > >On Sun, Feb 18, 2018 at 08:46:35PM -0600, Rob Herring wrote: >> On Mon, Feb 12, 2018 at 10:56:40PM +0530, Preetham Chandru Ramchandra >wrote: >> > From: Preetham Ramchandra <pchandru@xxxxxxxxxx> >> > >> > This adds bindings documentation for the AHCI controller on Tegra210 >> > >> > Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx> >> > --- >> > v7: >> > * For Aux register set drop the Tegra210 since this register >> > set also works on Tegra124 >> > * rephrase the sentence for cml1 clock >> > * change the commit subject to include ahci-tegra >> > * drop pll_e since CCF handles it automatically as >> > CML1 is a child clock of it. >> > v4: >> > * changed the commit message >> > * changed 'sata-cold' reset to mandatory for t210 and t124 >> > * Removed the regulators for T210 since these regulators >> > will be enabled in phy driver. >> > v3: >> > * Add AUX register. >> > v2: >> > * change cml1, pll_e and phy regulators as optional >> > for T210. >> > --- >> > .../bindings/ata/nvidia,tegra124-ahci.txt | 35 ++++++++++++++-------- >> > 1 file changed, 22 insertions(+), 13 deletions(-) >> > >> > diff --git >> > a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >> > b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >> > index 66c83c3e8915..0f4520a00716 100644 >> > --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >> > +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >> > @@ -1,20 +1,19 @@ >> > -Tegra124 SoC SATA AHCI controller >> > +Tegra SoC SATA AHCI controller >> > >> > Required properties : >> > -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". >> > Otherwise, >> > - must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', >> > where <chip> >> > - is tegra132. >> > -- reg : Should contain 2 entries: >> > +- compatible : Must be one of: >> > + - Tegra124 : "nvidia,tegra124-ahci" >> > + - Tegra210 : "nvidia,tegra210-ahci" >> >> Are you dropping T132? >> >> > +- reg : Should contain 3 entries: >> >> You can't just add more entries to existing compatibles. Does this >> apply to T124? > >I'd consider this a bug in existing DTSs. The SATA AUX registers exist as far back as >Tegra30. The reason why they were never included in the DTS in because the >driver never programmed those registers. > >However, the driver change in patch 5/7 which uses this has a comment that AUX >registers are optional, so perhaps we can just add that fact to the bindings as >well. > Okay, will make it optional >Thierry > >* Unknown Key >* 0x7F3EB3A1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
