On Thu, Feb 01, 2018 at 10:54:15AM +0000, Jon Hunter wrote:
>
> On 01/02/18 10:30, Peter De Schrijver wrote:
> > On Wed, Jan 31, 2018 at 10:43:04AM +0000, Jon Hunter wrote:
> >>
> >> On 24/01/18 12:45, Peter De Schrijver wrote:
> >>> When using a PWM controlled regulator, the voltage step and offset are
> >>> determined by the regulator IC in use. This is specified in DT rather
> >>> than fixed in the CVB table. Hence pass this information to the CVB table
> >>> calculation function. For backwards compatibility the table values are used
> >>> if the corresponding parameter is 0.
> >>>
> >>> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> >>> ---
> >>> drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 23 +++++++++++++++++++++--
> >>> drivers/clk/tegra/cvb.c | 18 ++++++++++++++----
> >>> drivers/clk/tegra/cvb.h | 5 +++--
> >>> 3 files changed, 38 insertions(+), 8 deletions(-)
> >>>
> >>> diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
> >>> index 440eb8d..6205ce1 100644
> >>> --- a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
> >>> +++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
> >>> @@ -111,6 +111,7 @@ static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
> >>> struct tegra_dfll_soc_data *soc;
> >>> const struct of_device_id *of_id;
> >>> const struct dfll_fcpu_data *fcpu_data;
> >>> + struct rail_alignment align;
> >>>
> >>> of_id = of_match_device(tegra124_dfll_fcpu_of_match, &pdev->dev);
> >>> fcpu_data = of_id->data;
> >>> @@ -135,12 +136,30 @@ static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
> >>> return -ENODEV;
> >>> }
> >>>
> >>> + err = of_property_read_u32(pdev->dev.of_node, "nvidia,align-offset-uv",
> >>> + &align.offset_uv);
> >>> + if (err < 0) {
> >>> + dev_err(&pdev->dev,
> >>> + "offset uv not found, default to table value\n");
> >>> + align.offset_uv = 0;
> >>> + }
> >>> +
> >>> + err = of_property_read_u32(pdev->dev.of_node, "nvidia,align-step-uv",
> >>> + &align.step_uv);
> >>> + if (err < 0) {
> >>> + dev_err(&pdev->dev,
> >>> + "step uv not found, default to table value\n");
> >>> + align.step_uv = 0;
> >>> + }
> >>> +
> >>
> >> I am a bit confused by this ...
> >>
> >> 1. Isn't this going to break Tegra124 DFLL support?
> >
> > We fall back to the original behaviour in case the properties are missing, so
> > it should work.
>
> Ah yes. However, on Tegra124 now I see all this prints. Can't we only
> read these properties if using PWM?
>
I think it would make more sense then to get these parameters from the
regulator object in case of i2c. If that works on Tegra124, we can eliminate
using the CVB table align values entirely.
Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
