On 19.12.2017 20:52, Alan Stern wrote:
> On Sun, 17 Dec 2017, Dmitry Osipenko wrote:
>
>> Previously tegra-phy driver was built only when ehci-tegra was, now
>> tegra-phy has its own Kconfig entry. Remove the USB_PHY dependencies
>> from ehci-tegra's Kconfig since they aren't useful anymore.
>
> Are you sure they aren't useful? Does this mean it is now
> possible/useful to configure a kernel with USB_EHCI_TEGRA enabled and
> USB_PHY disabled?
I'm not entirely sure that USB_TEGRA_PHY isn't useful because initially (in V1)
I proposed to do the other way around, to select PHY when ehci-tegra / chipidea
drivers are enabled. But that proposal wasn't very successful [0][1]. Yes, it
means that ehci-tegra could be built without the tegra-phy.
The USB_ULPI option isn't needed for compiling ehci-tegra, but for tegra-phy
driver. I've moved that option to the tegra-phy's Kconfig, see the previous
patch in the series ("Add Kconfig entry for Tegra PHY driver").
[0] https://marc.info/?l=linux-tegra&m=151307881119328
[1] https://marc.info/?l=linux-tegra&m=151294749618823
>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>> ---
>> drivers/usb/host/Kconfig | 3 ---
>> 1 file changed, 3 deletions(-)
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index 6150bed7cfa8..5042e72c1b76 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -234,9 +234,6 @@ config USB_EHCI_TEGRA
>> tristate "NVIDIA Tegra HCD support"
>> depends on ARCH_TEGRA
>> select USB_EHCI_ROOT_HUB_TT
>> - select USB_PHY
>> - select USB_ULPI
>> - select USB_ULPI_VIEWPORT
>
> Maybe you should add
>
> select USB_TEGRA_PHY
>
> here. Also, what happened to USB_ULPI_VIEWPORT? Is it still
> important? If not, then what changed?
USB_ULPI_VIEWPORT is selected by USB_ULPI, so we don't need to duplicate the
selection. See drivers/usb/phy/Kconfig.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
