PLL_C_OUT_1 can't produce 216 MHz defined in the init_table. Let's
set it to 240 MHz and explicitly specify HCLK rate for consistency.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Acked-By: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
---
Change log:
v2: No change.
drivers/clk/tegra/clk-tegra20.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index d143a867968a..06c743988ae2 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1019,9 +1019,9 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 0 },
{ TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 0 },
- { TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 216000000, 0 },
- { TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 0, 0 },
- { TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 0, 0 },
+ { TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
+ { TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 240000000, 0 },
+ { TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
{ TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 0 },
{ TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1 },
{ TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1 },
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
