This series of patches add loadable kernel module and power management support to Tegra PCIe host controller driver. These patches are tested on Jetson TK1, TX1 and TX2 platforms, following are the verification details. - Multiple module insert & remove - PCIe device functionality after module insert - Free clock, resets, regulators, powergate, iomem and interrupt resources after module remove - PCIe device functionality after resume from RAM Tegra PCIe host controller driver is using ioremap_page_range() which is not exported. This is switched with devm_ioremap() in the series 'https://patchwork.ozlabs.org/project/linux-tegra/list/?series=9907'. Both these series will complete the loadable module support for Tegra PCIe host driver. Manikanta Maddireddy (10): genirq: Export irq_set_msi_desc() of: Export of_pci_range_to_resource() PM / QoS: Fix device resume latency for non PM QoS devices ARM: tegra: EXPORT tegra_cpuidle_pcie_irqs_in_use() PCI: Export pci_find_host_bridge() PCI: Export pci_flags PCI: tegra: free resources on probe failure PCI: tegra: Add loadable kernel module support PCI: tegra: Broadcast PME_turn_Off message before link goes to L2 PCI: tegra: Add power management support arch/arm/mach-tegra/cpuidle.c | 1 + drivers/of/address.c | 1 + drivers/pci/host-bridge.c | 1 + drivers/pci/host/Kconfig | 2 +- drivers/pci/host/pci-tegra.c | 359 +++++++++++++++++++++++++++++++++--------- drivers/pci/setup-bus.c | 1 + include/linux/pm_qos.h | 3 +- kernel/irq/chip.c | 1 + 8 files changed, 294 insertions(+), 75 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
