Re: [PATCH] arm64: mm: Set MAX_PHYSMEM_BITS based on ARM64_VA_BITS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/11/17 17:55, Jerome Glisse wrote:
On Fri, Nov 10, 2017 at 03:11:15PM +0000, Robin Murphy wrote:
On 09/11/17 22:58, Krishna Reddy wrote:
MAX_PHYSMEM_BITS greater than ARM64_VA_BITS is causing memory
access fault, when HMM_DMIRROR test is enabled.
In the failing case, ARM64_VA_BITS=39 and MAX_PHYSMEM_BITS=48.
HMM_DMIRROR test selects phys memory range from end based on
MAX_PHYSMEM_BITS and gets mapped into VA space linearly.
As VA space is 39-bit and phys space is 48-bit, this has caused
incorrect mapping and leads to memory access fault.

Limiting the MAX_PHYSMEM_BITS to ARM64_VA_BITS fixes the issue and is
the right thing instead of hard coding it as 48-bit always.

[    3.378655] Unable to handle kernel paging request at virtual address 3befd000000
[    3.378662] pgd = ffffff800a04b000
[    3.378900] [3befd000000] *pgd=0000000081fa3003, *pud=0000000081fa3003, *pmd=0060000268200711
[    3.378933] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[    3.378938] Modules linked in:
[    3.378948] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.9.52-tegra-g91402fdc013b-dirty #51
[    3.378950] Hardware name: quill (DT)
[    3.378954] task: ffffffc1ebac0000 task.stack: ffffffc1eba64000
[    3.378967] PC is at __memset+0x1ac/0x1d0
[    3.378976] LR is at sparse_add_one_section+0xf8/0x174
[    3.378981] pc : [<ffffff80084c212c>] lr : [<ffffff8008eda17c>] pstate: 404000c5
[    3.378983] sp : ffffffc1eba67a40
[    3.378993] x29: ffffffc1eba67a40 x28: 0000000000000000
[    3.378999] x27: 000000000003ffff x26: 0000000000000040
[    3.379005] x25: 00000000000003ff x24: ffffffc1e9f6cf80
[    3.379010] x23: ffffff8009ecb2d4 x22: 000003befd000000
[    3.379015] x21: ffffffc1e9923ff0 x20: 000000000003ffff
[    3.379020] x19: 00000000ffffffef x18: ffffffffffffffff
[    3.379025] x17: 00000000000024d7 x16: 0000000000000000
[    3.379030] x15: ffffff8009cd8690 x14: ffffffc1e9f6c70c
[    3.379035] x13: ffffffc1e9f6c70b x12: 0000000000000030
[    3.379039] x11: 0000000000000040 x10: 0101010101010101
[    3.379044] x9 : 0000000000000000 x8 : 000003befd000000
[    3.379049] x7 : 0000000000000000 x6 : 000000000000003f
[    3.379053] x5 : 0000000000000040 x4 : 0000000000000000
[    3.379058] x3 : 0000000000000004 x2 : 0000000000ffffc0
[    3.379063] x1 : 0000000000000000 x0 : 000003befd000000
[    3.379064]
[    3.379069] Process swapper/0 (pid: 1, stack limit = 0xffffffc1eba64028)
[    3.379071] Call trace:
[    3.379079] [<ffffff80084c212c>] __memset+0x1ac/0x1d0

What's the deal with this memset? AFAICS we're in __add_pages() from
hmm_devmem_pages_create() calling add_pages() for private memory which it
does not expect to be in the linear map anyway :/

There appears to be a more fundamental problem being papered over here.

Robin.

Yes i think the dummy driver is use badly, if you want to test CDM memory
with dummy driver you need to steal regular memory to act as CDM memory.
You can take a look at following 2 patches:

https://cgit.freedesktop.org/~glisse/linux/commit/?h=hmm-cdm-next&id=fcc1e94027dbee9525f75b2a9ad88b2e6279558a
https://cgit.freedesktop.org/~glisse/linux/commit/?h=hmm-cdm-next&id=84204c5be742186236b371ea2f7ad39bf1770fe6

Note that this is only if your device have its own memory that is not
reported as regular ram to kernel resource and if that memory is
accessible by CPU in cache coherent way.

For tegra platform i don't think you have any such memory. Thus you
do not need to register any memory to use HMM. But we can talk about
your platform in private mail under NDA if it is not the case.

Note that no matter what i still think it make sense to properly define
MAX_PHYSMEM_BITS like on x86 or powerpc.

Its a bit tricky on arm64. Essentially the VMEMMAP can cover a region
of (1 << (VA_BITS - 1)), the size of the linear map. However, it does
allow the physical memory to be above VA_BITS. e.g, one can boot a
39bit VA kernel on a system where the RAM is at 40bits. We adjust the
"vmemmap" to make sure that it points to the first "valid" pfn (based
on the start address of the memory).

If we reduce the MAX_PHYSMEM_BITS to VA_BITS, that could break the kernel
booting on platforms where the memory is above VA_BITS. I am wondering
if we should do an additional check, pfn_valid() before we go ahead
and assume that the PFN can be mapped in the cases like above.

Suzuki



[    3.379085] [<ffffff8008ed5100>] __add_pages+0x130/0x2e0
[    3.379093] [<ffffff8008211cf4>] hmm_devmem_pages_create+0x20c/0x310
[    3.379100] [<ffffff8008211fcc>] hmm_devmem_add+0x1d4/0x270
[    3.379128] [<ffffff80087111c8>] dmirror_probe+0x50/0x158
[    3.379137] [<ffffff8008732590>] platform_drv_probe+0x60/0xc8
[    3.379143] [<ffffff800872fbf4>] driver_probe_device+0x26c/0x420
[    3.379149] [<ffffff800872fecc>] __driver_attach+0x124/0x128
[    3.379155] [<ffffff800872d388>] bus_for_each_dev+0x88/0xe8
[    3.379166] [<ffffff800872f248>] driver_attach+0x30/0x40
[    3.379171] [<ffffff800872ec18>] bus_add_driver+0x1f8/0x2b0
[    3.379177] [<ffffff8008730e38>] driver_register+0x68/0x100
[    3.379183] [<ffffff80087324d4>] __platform_driver_register+0x5c/0x68
[    3.379192] [<ffffff800951f918>] hmm_dmirror_init+0x88/0xc4
[    3.379200] [<ffffff800808359c>] do_one_initcall+0x5c/0x170
[    3.379208] [<ffffff80094e0dd0>] kernel_init_freeable+0x1b8/0x258
[    3.379231] [<ffffff8008ed44f0>] kernel_init+0x18/0x108
[    3.379236] [<ffffff80080832d0>] ret_from_fork+0x10/0x40
[    3.379246] ---[ end trace 578db63bb139b8b8 ]---

Signed-off-by: Krishna Reddy <vdumpa@xxxxxxxxxx>
---
   arch/arm64/include/asm/sparsemem.h | 6 ++++++
   1 file changed, 6 insertions(+)

diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 74a9d301819f..19ecd0b0f3a3 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -17,7 +17,13 @@
   #define __ASM_SPARSEMEM_H
   #ifdef CONFIG_SPARSEMEM
+
+#ifdef CONFIG_ARM64_VA_BITS
+#define MAX_PHYSMEM_BITS	CONFIG_ARM64_VA_BITS
+#else
   #define MAX_PHYSMEM_BITS	48
+#endif
+
   #define SECTION_SIZE_BITS	30
   #endif


--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux