On 30.10.2017 06:18, Manikanta Maddireddy wrote:
Set required bit to have LTSSM wait for DLLP to finish before entering L1 or L2. This avoids truncation of PM messages which results in receiver errors. Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> --- V2: * no change in this patch drivers/pci/host/pci-tegra.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 75b408b32b8b..7f1e34e670d7 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -217,6 +217,9 @@ #define RP_VEND_CTL1 0xf48 #define RP_VEND_CTL1_ERPT (1 << 13) +#define RP_VEND_XP_BIST 0xf4c +#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE (1 << 28) + #define RP_VEND_CTL2 0x00000fa8 #define RP_VEND_CTL2_PCA_ENABLE (1 << 7) @@ -2160,6 +2163,13 @@ static void tegra_pcie_apply_sw_fixup(struct tegra_pcie_port *port) value |= RP_VEND_XP_OPPORTUNISTIC_ACK; value |= RP_VEND_XP_OPPORTUNISTIC_UPDATEFC; writel(value, port->base + RP_VEND_XP); + + /* LTSSM will wait for DLLP to finish before entering L1 or L2, + * to avoid truncation of PM messages which results in receiver errors + */ + value = readl(port->base + RP_VEND_XP_BIST); + value |= RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE; + writel(value, port->base + RP_VEND_XP_BIST); } /* * FIXME: If there are no PCIe cards attached, then calling this function
This would also move to the calling function, but Reviewed-by: Mikko Perttunen <mperttunen@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
