On 29-Oct-17 3:12 PM, Vidya Sagar wrote: > > > On Saturday 28 October 2017 12:59 AM, Manikanta Maddireddy wrote: >> Set required bit to have LTSSM wait for DLLP to finish before entering L1 >> or L2. This avoids truncation of PM messages which results in receiver >> errors. >> >> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> >> --- >> drivers/pci/host/pci-tegra.c | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c >> index b8cac871712b..6028d5f3d5bb 100644 >> --- a/drivers/pci/host/pci-tegra.c >> +++ b/drivers/pci/host/pci-tegra.c >> @@ -217,6 +217,9 @@ >> #define RP_VEND_CTL1 0xf48 >> #define RP_VEND_CTL1_ERPT (1 << 13) >> +#define RP_VEND_XP_BIST 0xf4c >> +#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE (1 << 28) >> + > BIT macro is preferred here. Left shift is used everywhere, so to be inline with that I used same format >> #define RP_VEND_CTL2 0x00000fa8 >> #define RP_VEND_CTL2_PCA_ENABLE (1 << 7) >> @@ -2160,6 +2163,13 @@ static void tegra_pcie_apply_sw_fixup(struct tegra_pcie_port *port) >> value |= RP_VEND_XP_OPPORTUNISTIC_ACK; >> value |= RP_VEND_XP_OPPORTUNISTIC_UPDATEFC; >> writel(value, port->base + RP_VEND_XP); >> + >> + /* LTSSM will wait for DLLP to finish before entering L1 or L2, >> + * to avoid truncation of PM messages which results in receiver errors >> + */ >> + value = readl(port->base + RP_VEND_XP_BIST); >> + value |= RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE; >> + writel(value, port->base + RP_VEND_XP_BIST); >> } >> /* >> * FIXME: If there are no PCIe cards attached, then calling this function > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
