In Tegra186 PHY programming is done by BPMP-FW, so PHY calls are skipped
in driver. REFCLK pad settings are independent of PHY and should be
programmed by driver. So move REFCLK pad settings out of phy_power_on().
These pad settings improves REFCLK peak to peak amplitude.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---
drivers/pci/host/pci-tegra.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index b41c60c7414c..2c64eb6cc3cc 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -910,7 +910,6 @@ static int tegra_pcie_port_phy_power_off(struct tegra_pcie_port *port)
static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
struct tegra_pcie_port *port;
int err;
@@ -936,12 +935,6 @@ static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
}
}
- /* Configure the reference clock driver */
- pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
-
- if (soc->num_ports > 2)
- pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
-
return 0;
}
@@ -2049,6 +2042,17 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
return 0;
}
+static void tegra_pcie_apply_pad_settings(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc *soc = pcie->soc;
+
+ /* Configure the reference clock driver */
+ pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
+
+ if (soc->num_ports > 2)
+ pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
+}
+
/*
* FIXME: If there are no PCIe cards attached, then calling this function
* can result in the increase of the bootup time as there are big timeout
@@ -2107,6 +2111,7 @@ static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
struct device *dev = pcie->dev;
struct tegra_pcie_port *port, *tmp;
+ tegra_pcie_apply_pad_settings(pcie);
list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
dev_info(dev, "probing port %u, using %u lanes\n",
port->index, port->lanes);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
