Felipe,
On 02/10/17 12:52, Thierry Reding wrote:
> * PGP Signed by an unknown key
>
> On Mon, Oct 02, 2017 at 12:22:53PM +0100, Jon Hunter wrote:
>> Commit dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124")
>> added UDC support for Tegra but with UDC support enabled, is was found
>> that Tegra30, Tegra114 and Tegra124 would hang on entry to suspend.
>>
>> The hang occurred during the suspend of the USB PHY when the Tegra PHY
>> driver attempted to disable the PHY clock. The problem is that before
>> the Tegra PHY driver is suspended, the chipidea driver already disabled
>> the PHY clock and when the Tegra PHY driver suspended, it could not read
>> DEVLC register and caused the device to hang.
>>
>> The Tegra USB PHY driver is used by both the Tegra EHCI driver and now
>> the chipidea UDC driver and so simply removing the disabling of the PHY
>> clock from the USB PHY driver would not work for the Tegra EHCI driver.
>> Fortunately, the status of the USB PHY clock can be read from the
>> USB_SUSP_CTRL register and therefore, to workaround this issue, simply
>> poll the register prior to disabling the clock in USB PHY driver to see
>> if clock gating has already been initiated. Please note that it can take
>> a few uS for the clock to disable and so simply reading this status
>> register once on entry is not sufficient.
>>
>> Similarly when turning on the PHY clock, it is possible that the clock
>> is already enabled or in the process of being enabled, and so check for
>> this when enabling the PHY.
>>
>> Please note that no issues are seen with Tegra20 because it has a slightly
>> different PHY to Tegra30/114/124.
>>
>> Fixes: dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124")
>>
>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
>> ---
>> Changes since V1:
>> - Added fixes tag
>> - Added test in PHY enable to see if clock is already on before enabling
>>
>> drivers/usb/phy/phy-tegra-usb.c | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
This fix is needed for v4.14, if you are ok with the change, can you
pick this up so we can get this merged?
Cheers
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
