On 08/09/17 22:48, Krishna Reddy wrote: > SDHCI controllers on Tegra186 support 40 bit addressing. > IOVA addresses are 48-bit wide on Tegra186. > SDHCI host common code sets dma mask as either 32-bit or 64-bit. > To avoid access issues when SMMU is enabled, disable 64-bit dma. > > Signed-off-by: Krishna Reddy <vdumpa@xxxxxxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > --- > drivers/mmc/host/sdhci-tegra.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c > index 0cd6fa80db66..b877c13184c2 100644 > --- a/drivers/mmc/host/sdhci-tegra.c > +++ b/drivers/mmc/host/sdhci-tegra.c > @@ -422,7 +422,15 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = { > SDHCI_QUIRK_NO_HISPD_BIT | > SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | > SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | > + /* SDHCI controllers on Tegra186 support 40-bit addressing. > + * IOVA addresses are 48-bit wide on Tegra186. > + * With 64-bit dma mask used for SDHCI, accesses can > + * be broken. Disable 64-bit dma, which would fall back > + * to 32-bit dma mask. Ideally 40-bit dma mask would work, > + * But it is not supported as of now. > + */ > + SDHCI_QUIRK2_BROKEN_64_BIT_DMA, > .ops = &tegra114_sdhci_ops, > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html