From: Alex Frid <afrid@xxxxxxxxxx> Increased Tegra210 UTMIPLL power on delay to 20us (spec maximum is 15us). Also remove a few empty lines to make it more clear the ACTIVE_DLY_COUNT and ENABLE_DLY_COUNT fields. Signed-off-by: Alex Frid <afrid@xxxxxxxxxx> Reviewed-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx> Reviewed-by: Jon Mayo <jmayo@xxxxxxxxxx> --- drivers/clk/tegra/clk-tegra210.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index 4fa7ab3..fd04b0e 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -2472,15 +2472,14 @@ static void tegra210_utmi_param_configure(void) reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].active_delay_count); writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); /* Program UTMIP PLL delay and oscillator frequency counts */ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].enable_delay_count); @@ -2496,7 +2495,8 @@ static void tegra210_utmi_param_configure(void) reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - udelay(1); + + udelay(20); /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
