+CC linux-tegra@xxxxxxxxxxxxxxx >-----Original Message----- >From: Preetham Chandru >Sent: Friday, May 12, 2017 3:04 PM >To: thierry.reding@xxxxxxxxx; tj@xxxxxxxxxx >Cc: tegra@xxxxxxxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; Laxman Dewangan ><ldewangan@xxxxxxxxxx>; preetham260@xxxxxxxxx; Venu Byravarasu ><vbyravarasu@xxxxxxxxxx>; Pavan Kunapuli <pkunapuli@xxxxxxxxxx>; Preetham >Chandru <pchandru@xxxxxxxxxx> >Subject: [PATCH V3 2/3] dt-bindings: tegra: Add tegra210 AHCI > >From: Preetham Chandru R <pchandru@xxxxxxxxxx> > >Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx> >--- >v3: >* Add AUX register. >v2: >* change cml1, pll_e and phy regulators as optional > for T210. >--- > .../bindings/ata/nvidia,tegra124-ahci.txt | 45 +++++++++++++++------- > 1 file changed, 31 insertions(+), 14 deletions(-) > >diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >index 66c83c3..dc62dba 100644 >--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >@@ -1,32 +1,49 @@ >-Tegra124 SoC SATA AHCI controller >+Tegra SoC SATA AHCI controller > > Required properties : >-- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, >- must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> >- is tegra132. >-- reg : Should contain 2 entries: >+- compatible : Must be one of: >+ - Tegra124 : "nvidia,tegra124-ahci" >+ - Tegra210 : "nvidia,tegra210-ahci" >+- reg : Should contain 3 entries: > - AHCI register set (SATA BAR5) > - SATA register set >+ - AUX register set > - interrupts : Defines the interrupt used by SATA > - clocks : Must contain an entry for each entry in clock-names. > See ../clocks/clock-bindings.txt for details. > - clock-names : Must include the following entries: > - sata > - sata-oob >- - cml1 >- - pll_e > - resets : Must contain an entry for each entry in reset-names. > See ../reset/reset.txt for details. > - reset-names : Must include the following entries: > - sata > - sata-oob >- - sata-cold >+ - For T124: sata-cold > - phys : Must contain an entry for each entry in phy-names. > See ../phy/phy-bindings.txt for details. > - phy-names : Must include the following entries: >- - sata-phy : XUSB PADCTL SATA PHY >-- hvdd-supply : Defines the SATA HVDD regulator >-- vddio-supply : Defines the SATA VDDIO regulator >-- avdd-supply : Defines the SATA AVDD regulator >-- target-5v-supply : Defines the SATA 5V power regulator >-- target-12v-supply : Defines the SATA 12V power regulator >+ - For T124: >+ - sata-phy : XUSB PADCTL SATA PHY >+ - For T210: >+ - sata-0 >+- For T124: >+ - hvdd-supply : Defines the SATA HVDD regulator >+ - vddio-supply : Defines the SATA VDDIO regulator >+ - avdd-supply : Defines the SATA AVDD regulator >+ - target-5v-supply : Defines the SATA 5V power regulator >+ >+Optional properties: >+- clock-names : >+ - cml1 : >+ cml1 clock is required by phy so it is optional to define >+ here as phy driver will be enabling this clock. >+ - pll_e : >+ pll_e is the parent of cml1 clock so it is optional to define >+ here as phy driver will be enabling this clock. >+- For T210: >+ - l0-hvddio-sata-supply : Defines the SATA HVDDIO regulator >+ - l0-dvddio-sata-supply : Defines the SATA DVDDIO regulator >+ - hvdd-pex-pll-e-supply : Defines the PEX PLL_E regulator >+ - dvdd-sata-pll-supply : Defines the SATA PLL regulator >+ - hvdd-sata-supply : Defines the SATA HVDD regulator >-- >2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
