On 28/03/17 15:55, Sudeep Holla wrote:
> On 28/03/17 12:48, Jon Hunter wrote:
>> Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
>> all CPUs can be enabled on boot. This assumes that the PSCI firmware
>> has been loaded during the initial bootstrap on the device before the
>> kernel starts (which is typically the case for these platforms). The
>> PSCI firmware version is set to v0.2 which aligns with the current
>> shipping version for Tegra.
>>
>> Reported-by: Martin Michlmayr <tbm@xxxxxxxxxx>
>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +++++++++++++++++++++++
>> arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 24 ++++++++++++++++++++++++
>> 2 files changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> index 906fb836d241..de1696c28140 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
>> @@ -296,6 +296,29 @@
>> };
>> };
>>
>> + cpus {
>> + cpu@0 {
>> + enable-method = "psci";
>
> Is some firmware expected to populate other required properties ?
>
> If yes, why not populate everything in the firmware ?
>
> If no, how does it even boot secondaries without the "reg" property
> that usually contains MPIDR.
Please see 'arch/arm64/boot/dts/nvidia/tegra210.dtsi' which has these
fields. So far we have been populating the psci information at the board
level and so I have kept with that here and so the above is just the
delta. Maybe the $subject could be a little clearer!
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
