On Wed, Mar 08, 2017 at 12:15:53PM +0000, Jon Hunter wrote:
>
> On 08/03/17 12:03, Jon Hunter wrote:
> >
> >
> > On 23/02/17 17:30, Thierry Reding wrote:
> >> From: Thierry Reding <treding@xxxxxxxxxx>
> >>
> >> The P2771 has three keys (power, volume up and volume down) that are
> >> connected to pins on the AON GPIO controller.
> >>
> >> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> >> ---
> >> arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 34 ++++++++++++++++++++++
> >> 1 file changed, 34 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
> >> index 0d3c0996d832..1c195d71806d 100644
> >> --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
> >> +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
> >> @@ -1,8 +1,42 @@
> >> /dts-v1/;
> >>
> >> +#include <dt-bindings/input/linux-event-codes.h>
> >> +
> >> #include "tegra186-p3310.dtsi"
> >>
> >> / {
> >> model = "NVIDIA Tegra186 P2771-0000 Development Board";
> >> compatible = "nvidia,p2771-0000", "nvidia,tegra186";
> >> +
> >> + gpio-keys {
> >> + compatible = "gpio-keys";
> >> +
> >> + power {
> >> + label = "Power";
> >> + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0)
> >> + GPIO_ACTIVE_LOW>;
> >> + linux,input-type = <EV_KEY>;
> >> + linux,code = <KEY_POWER>;
> >> + debounce-interval = <10>;
> >> + wakeup-source;
> >> + };
> >> +
> >> + volume-up {
> >> + label = "Volume Up";
> >> + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1)
> >> + GPIO_ACTIVE_LOW>;
> >> + linux,input-type = <EV_KEY>;
> >> + linux,code = <KEY_VOLUMEUP>;
> >> + debounce-interval = <10>;
> >> + };
> >
> > My schematic shows this pin as 'force-recovery'.
> >
> >> +
> >> + volume-down {
> >> + label = "Volume Down";
> >> + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2)
> >> + GPIO_ACTIVE_LOW>;
> >> + linux,input-type = <EV_KEY>;
> >> + linux,code = <KEY_VOLUMEDOWN>;
> >> + debounce-interval = <10>;
> >> + };
> >> + };
> >> };
> >
> > And this one as 'sleep_l'.
>
> Actually, I do see this as "VOL Down". So ignore that and I assume we
> re-use recovery so ...
>
> Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Yes, the board marks FF.02 as "VOL D" and I figured that recovery isn't
useful during normal system operation and "VOL U" would be the natural
choice. Often these keys end up being used for menu navigation in some
Android bootloader. That's not relevant to Linux, but it gives us some
consistency across the board.
Thierry
Attachment:
signature.asc
Description: PGP signature
