On Fri, Jan 27, 2017 at 09:39:38AM +0100, Thierry Reding wrote:
> From: Stephen Warren <swarren@xxxxxxxxxx>
>
> In Tegra186, the BPMP (Boot and Power Management Processor) owns certain
> HW devices, such as the I2C controller for the power management I2C bus.
> Software running on other CPUs must perform IPC to the BPMP in order to
> execute transactions on that I2C bus. This binding describes an I2C bus
> that is accessed in such a fashion.
>
> Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
> Reviewed-by: Simon Glass <sjg@xxxxxxxxxxxx>
> Signed-off-by: Tom Warren <twarren@xxxxxxxxxx>
> Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
Rob, sorry for not Cc'ing you earlier on this, but I had thought this
binding had already been reviewed and acked since it is merged in
U-Boot.
Wolfram was concerned in particular about the nvidia,bpmp-bus-id
property below.
Can you give this a quick look, please?
Thanks,
Thierry
> diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
> new file mode 100644
> index 000000000000..ab240e10debc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
> @@ -0,0 +1,42 @@
> +NVIDIA Tegra186 BPMP I2C controller
> +
> +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
> +devices, such as the I2C controller for the power management I2C bus. Software
> +running on other CPUs must perform IPC to the BPMP in order to execute
> +transactions on that I2C bus. This binding describes an I2C bus that is
> +accessed in such a fashion.
> +
> +The BPMP I2C node must be located directly inside the main BPMP node. See
> +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
> +
> +This node represents an I2C controller. See ../i2c/i2c.txt for details of the
> +core I2C binding.
> +
> +Required properties:
> +- compatible:
> + Array of strings.
> + One of:
> + - "nvidia,tegra186-bpmp-i2c".
> +- #address-cells: Address cells for I2C device address.
> + Single-cell integer.
> + Must be <1>.
> +- #size-cells:
> + Single-cell integer.
> + Must be <0>.
> +- nvidia,bpmp-bus-id:
> + Single-cell integer.
> + Indicates the I2C bus number this DT node represent, as defined by the
> + BPMP firmware.
> +
> +Example:
> +
> +bpmp {
> + ...
> +
> + i2c {
> + compatible = "nvidia,tegra186-bpmp-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + nvidia,bpmp-bus-id = <5>;
> + };
> +};
> --
> 2.11.0
>
Attachment:
signature.asc
Description: PGP signature
