This switches a few interrupt definitions that were using GPIO_ACTIVE_HIGH as IRQ type, which is invalid. This is mostly a cosmetic change, that doesn't affect any driver. Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx> --- arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index eabfa655a3cd..ef430aa30152 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -65,7 +65,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; temperature-sensor@4c { @@ -331,7 +331,7 @@ reg = <0x9>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; + IRQ_TYPE_EDGE_BOTH>; ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html