From: Alexandre Courbot <acourbot@xxxxxxxxxx>
Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson
TX1 board. This addition allows the GPU to be used provided the
bootloader properly enabled the GPU node.
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 5fda583351d7..906fb836d241 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -21,6 +21,10 @@
reg = <0x0 0x80000000 0x1 0x0>;
};
+ gpu@57000000 {
+ vdd-supply = <&vdd_gpu>;
+ };
+
/* debug port */
serial@70006000 {
status = "okay";
@@ -291,4 +295,18 @@
clock-frequency = <32768>;
};
};
+
+ regulators {
+ vdd_gpu: regulator@100 {
+ compatible = "pwm-regulator";
+ reg = <100>;
+ pwms = <&pwm 1 4880>;
+ regulator-name = "VDD_GPU";
+ regulator-min-microvolt = <710000>;
+ regulator-max-microvolt = <1320000>;
+ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ regulator-ramp-delay = <80>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
};
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
