On 12/01/2016 06:47 PM, Ralf Ramsauer wrote:
Hi Stephen,
On 12/01/2016 05:04 PM, Stephen Warren wrote:
On 12/01/2016 07:15 AM, Ralf Ramsauer wrote:
Hi,
I observed that touching MMIO regions of Tegra devices with its
corresponding clock gate deactivated immediately freezes the whole
system. No kernel panic, nothing.
I tested this behavior with a small kernel module, find it attached. A
few seconds after loading this module, the whole device freezes. Tested
this on a TK1 and TX1.
Unfortunately, this is indeed the way the HW works.
That's no good news :(
Do you know if this applies to the whole Tegra architecture or only to
some boards?
It does apply to the whole architecture for all revisions pre-Tegra186
(which is newer than Tegra210 despite the number).
- Mikko
What is the actual expected behavior on ARM(64) when touching ungated
MMIO regions? Is it specified somewhere?
I don't believe the ARM architecture specifies behaviour in this case,
or if it does, defines it as implementation defined, which means that
pretty much any behaviour is valid.
I tested the same scenario on another ARM64 board (LeMaker HiKey), which
did (fortunately) not freeze.
Ralf
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
