Re: [PATCH V2 1/2] pinctrl: tegra: Add DT binding for io pads control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wednesday 16 November 2016 12:18 AM, Jon Hunter wrote:
On 09/11/16 13:06, Laxman Dewangan wrote:
+NVIDIA Tegra124 and later SoCs support the multi-voltage level and
+low power state of some of its IO pads. When IO interface are not
+used then IO pads can be configure in low power state to reduce
+the power from that IO pads. The IO pads can work in the voltage
+of the 1.8V and 3.3V of IO voltage from power rail sources.
The last sentence is a bit unclear and does not sound correct. I am not
sure if you are missing the word 'range' somewhere or if you are trying
to say it must be either 1.8V or 3.3V. Looks like you have the same
sentence on the changelog too.
The IO pads are designed to work in two different voltage rail 1.8V (nominal) and 3.3V (nominal) for interfacing.
However, the tolerances of the IO pads are:

1.8 V nominal is (1.62V, 1.98V)
3.3 V nominal is (2.97V,3.63V)

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux