On 03/11/16 12:30, Mirza Krak wrote:
2016-11-03 13:26 GMT+01:00 Mirza Krak <mirza.krak@xxxxxxxxx>:
2016-11-03 11:06 GMT+01:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
Hi Mirza,
On 27/10/16 15:01, Mirza Krak wrote:
From: Mirza Krak <mirza.krak@xxxxxxxxx>
Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which
is max rate.
The maximum rate value of 92 MHz is pulled from the downstream L4T
kernel.
Thanks for adding this. I assume that this is from an L4T r16 release with a
v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was
unable to see where this is set. Obviously v3.1 did not have CCF and so
everything seems to be in the arch/arm/mach-tegra directory for setting up
clocks. Can you point me to the appropriate sources so I can ACK this?
I use the kernel sources provided by Toradex, and these sources are
based on L4T r16 release.
http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463
Ops, pre-mature send.
I also added Marcel from Toradex on CC.
The link to the source are [1] for Tegra2 and [2] for Tegra3.
[1]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463
[2]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra3_clocks.c?h=tegra#n4353
Great. Yes I see the same. Thanks!
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
