Hi Marcel. 2016-08-30 17:01 GMT+02:00 Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>: > Hi Mirza > > Sorry, I long since wanted to give you some feedback on this as well. > > BTW: Thank you very much for taking this on! It has been and still is a fun project. So gladly doing it. > > On Wed, 2016-08-24 at 15:37 +0200, Mirza Krak wrote: >> From: Mirza Krak <mirza.krak@xxxxxxxxx> >> >> Hi. >> >> This is a follow up to my previous RFC to add support for Tegra GMI >> bus >> controller. >> >> I have tested this series on a Tegra30 using a Colibri T30 SOM on a >> custom >> carrier board which has multiple CAN controllers (SJA1000) connected >> to the >> GMI bus. > > We once did a nice GMI-Memory Board which mates with the extension > connector X3 of our V3.x Colibri Evaluation boards and allows testing > SRAM access not only in muxed but also in non-muxed mode albeit 16-bit > only. I took your driver for a spin both on Colibri T20 as well as > Colibri T30 both in muxed as well as non-muxed mode and it passed all > tests being both manual devmem2 type reads/writes as well as memtester > runs on the full 128K SRAM giving it the physical address using the -p > argument. > > So you may add the following to the whole series: > > Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board Thank you very much for testing. Will add your tags in the upcoming V3. Best Regards Mirza -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
