Re: [PATCH 3/6] dt/bindings: Add bindings for Tegra GMI controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2016-08-08 16:44 GMT+02:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
>> +
>> +  gmi@70090000 {
>> +    #address-cells = <1>;
>> +    #size-cells = <1>;
>
> I think 0 for size makes sense. I know that caused you problems before,
> but I am wondering if ...
>
>> +    ranges;
>
> ... ranges is needed here? If we do have it, I am wondering if it should
> be a single entry for the chip-select that is being used. For now we
> could only support a ranges with one entry.
>
>         #address-cells = <1>;
>         #size-cells = <1>;
>         ranges = <4 0x48000000 0x00040000>;
>
>> +    nvidia,snor-mux-mode;
>> +    nvidia,snor-adv-inv;
>> +    nvidia,snor-cs-select = <4>;
>
> I would have expected these under bus@X node as they are specific to the
> GMI CS.
>
> I would also expect that the actual chip-select number is encoded in the
> reg property.
>
>> +
>> +    bus@0,0 {
>
> bus@4
>
> No mention of this bus node in the above documentation.
>
>> +      compatible = "simple-bus";
>> +      reg = <0 0>;
>
> reg = <4>;
>
> We should look up the chip-select from the reg property.
>
>> +      ranges;
>> +
>> +      #address-cells = <1>;
>> +      #size-cells = <1>;
>> +
>> +      can@48000000 {
>> +        reg = <0x48000000 0x100>;
>> +        ...
>> +      };
>> +
>> +      can@48040000 {
>> +        reg = <0x48040000 0x100>;
>> +        ...
>> +      };
>
> If we use ranges we could have ...
>
>         can@0 {
>                 reg = <0x0 0x100>;
>                 ...
>         };
>
>         can@40000 {
>                 reg = <0x40000 0x100>;
>                 ...
>         };
>

Hi.

Like we discussed I am now trying to implement this but without
success and I am starting to think that it is not that simple unless I
am missing something.

Below tree

gmi@70009000 {
     status = "okay";
     #address-cells = <1>;
     #size-cells = <1>;
     ranges = <4 0x48000000 0x7ffffff>;

     bus@4 {
          compatible = "simple-bus";
          reg = <4 0>;
          #address-cells = <1>;
          #size-cells = <1>;
         nvidia,snor-mux-mode;
         nvidia,snor-adv-inv;

        can@0 {
              compatible = "nxp,sja1000";
              reg = <0 0x100>;
              ....
     };

     can@40000 {
           compatible = "nxp,sja1000";
           reg = <0x40000 0x100>;
           ....
    };
};
};

results in:

[    8.472509]    create child: /gmi@70009000/bus@4/can@0
[    8.472561] OF: ** translation for device /gmi@70009000/bus@4/can@0 **
[    8.472577] OF: bus is default (na=1, ns=1) on /gmi@70009000/bus@4
[    8.472589] OF: translating address: 00000000
[    8.472624] OF: parent bus is default (na=1, ns=1) on /gmi@70009000
[    8.472641] OF: no ranges; cannot translate
[    8.472668] of_irq_parse_one: dev=/gmi@70009000/bus@4/can@0, index=0
[    8.472687]  intspec=13 intlen=2
[    8.472726]  intsize=2 intlen=2
[    8.472740] of_irq_parse_raw:  /gpio@6000d000:0000000d,00000001
[    8.493718] of_irq_parse_raw: ipar=/gpio@6000d000, size=2
[    8.493737]  -> addrsize=1
[    8.493743]  -> got it !
[    8.493755] of_irq_parse_one: dev=/gmi@70009000/bus@4/can@0, index=1
[    8.493771]  intspec=13 intlen=2
[    8.493790]  intsize=2 intlen=2
[    8.493800] of_irq_parse_one: dev=/gmi@70009000/bus@4/can@0, index=0
[    8.493805]  intspec=13 intlen=2
[    8.493812]  intsize=2 intlen=2
[    8.493824] of_irq_parse_raw:  /gpio@6000d000:0000000d,00000001
[    8.493829] of_irq_parse_raw: ipar=/gpio@6000d000, size=2
[    8.493834]  -> addrsize=1
[    8.493837]  -> got it !
[    8.493869] OF: ** translation for device /gmi@70009000/bus@4/can@0 **
[    8.493885] OF: bus is default (na=1, ns=1) on /gmi@70009000/bus@4
[    8.493892] OF: translating address: 00000000
[    8.493902] OF: parent bus is default (na=1, ns=1) on /gmi@70009000
[    8.493906] OF: no ranges; cannot translate
[    8.493918] OF: ** translation for device /gmi@70009000/bus@4 **
[    8.493924] OF: bus is default (na=1, ns=1) on /gmi@70009000
[    8.493930] OF: translating address: 00000004
[    8.493938] OF: parent bus is default (na=1, ns=1) on /
[    8.493944] OF: walking ranges...
[    8.493952] OF: default map, cp=4, s=7ffffff, da=4
[    8.493973] OF: parent translation for: 48000000
[    8.493978] OF: with offset: 0
[    8.493986] OF: one level translation: 48000000
[    8.493989] OF: reached root node
[    8.494011] of_dma_get_range: no dma-ranges found for
node(/gmi@70009000/bus@4/can@0)
[    8.494037] platform 48000000.bus:can@0: device is not dma coherent
[    8.494048] platform 48000000.bus:can@0: device is not behind an iommu
[    8.495209] sja1000 probe entered
[    8.495212] sja1000 probe entered1

sja1000 probe fails because resource address is NULL.

The result is the same for the second child device.

I also attempted to add "ranges;" property to the bus child node,
which results in the same error on can@0, and can@4000 is actually
translated but it is not what I expect it to be (0x4803fff8).

And I am not quite sure how to get around this in a simple way. I can
not wrap my head around how the ranges property actually works really.

Any suggestions would be really helpful.

Best Regards
Mirza
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux