Re: [PATCH V6 3/9] irqdomain: Don't set type when mapping an IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2016-07-29 17:10 GMT+09:00 Marc Zyngier <marc.zyngier@xxxxxxx>:
> On 29/07/16 04:53, Masahiro Yamada wrote:
>> Hi.
>>
>>
>> I noticed my board would not work any more
>> when pulling recent updates.
>>
>>
>> I did "git-bisect" and I found the following commit is it.
>
> It would help if you did post the log showing the failure.
>
> What if you apply the following patch:
>
> https://git.kernel.org/cgit/linux/kernel/git/maz/arm-platforms.git/diff/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi?h=timers/level-trigger&id=95e1fd920fcadce81626cfa9bd6af1a361f17e58
>

Hi Mark,

Yes, it worked.

But I did not understand why you changed the 3rd cell to 0xf08.


The binding of arm,gic-v3.txt says as follows:


  The 3rd cell is the flags, encoded as follows:
        bits[3:0] trigger type and level flags.
                1 = edge triggered
                4 = level triggered


Only 1 and 4 are defined for the bits[3:0].




0xf04 worked, too.

Which is correct?






Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux