Re: [PATCH V2 04/10] firmware: tegra: add IVC library

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 5, 2016 at 6:04 PM, Joseph Lo <josephl@xxxxxxxxxx> wrote:
> The Inter-VM communication (IVC) is a communication protocol, which is
> designed for interprocessor communication (IPC) or the communication
> between the hypervisor and the virtual machine with a guest OS on it. So
> it can be translated as inter-virtual memory or inter-virtual machine
> communication. The message channels are maintained on the DRAM or SRAM
> and the data coherency should be considered. Or the data could be
> corrupted or out of date when the remote client checking it.
>
> Inside the IVC, it maintains memory-based descriptors for the TX/RX
> channels and the coherency issue of the counter and payloads. So the
> clients can use it to send/receive messages to/from remote ones.
>
> We introduce it as a library for the firmware drivers, which can use it
> for IPC.
>
> Based-on-the-work-by:
> Peter Newman <pnewman@xxxxxxxxxx>
>
> Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx>
> ---
> Changes in V2:
> - None
> ---
>  drivers/firmware/Kconfig        |   1 +
>  drivers/firmware/Makefile       |   1 +
>  drivers/firmware/tegra/Kconfig  |  13 +
>  drivers/firmware/tegra/Makefile |   1 +
>  drivers/firmware/tegra/ivc.c    | 659 ++++++++++++++++++++++++++++++++++++++++
>  include/soc/tegra/ivc.h         | 102 +++++++
>  6 files changed, 777 insertions(+)
>  create mode 100644 drivers/firmware/tegra/Kconfig
>  create mode 100644 drivers/firmware/tegra/Makefile
>  create mode 100644 drivers/firmware/tegra/ivc.c
>  create mode 100644 include/soc/tegra/ivc.h
>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 5e618058defe..bbd64ae8c4c6 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -200,5 +200,6 @@ config HAVE_ARM_SMCCC
>  source "drivers/firmware/broadcom/Kconfig"
>  source "drivers/firmware/google/Kconfig"
>  source "drivers/firmware/efi/Kconfig"
> +source "drivers/firmware/tegra/Kconfig"
>
>  endmenu
> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
> index 474bada56fcd..9a4df8171cc4 100644
> --- a/drivers/firmware/Makefile
> +++ b/drivers/firmware/Makefile
> @@ -24,3 +24,4 @@ obj-y                         += broadcom/
>  obj-$(CONFIG_GOOGLE_FIRMWARE)  += google/
>  obj-$(CONFIG_EFI)              += efi/
>  obj-$(CONFIG_UEFI_CPER)                += efi/
> +obj-y                          += tegra/
> diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
> new file mode 100644
> index 000000000000..1fa3e4e136a5
> --- /dev/null
> +++ b/drivers/firmware/tegra/Kconfig
> @@ -0,0 +1,13 @@
> +menu "Tegra firmware driver"
> +
> +config TEGRA_IVC
> +       bool "Tegra IVC protocol"
> +       depends on ARCH_TEGRA
> +       help
> +         IVC (Inter-VM Communication) protocol is part of the IPC
> +         (Inter Processor Communication) framework on Tegra. It maintains the
> +         data and the different commuication channels in SysRAM or RAM and
> +         keeps the content is synchronization between host CPU and remote
> +         processors.
> +
> +endmenu
> diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
> new file mode 100644
> index 000000000000..92e2153e8173
> --- /dev/null
> +++ b/drivers/firmware/tegra/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_TEGRA_IVC)                += ivc.o
> diff --git a/drivers/firmware/tegra/ivc.c b/drivers/firmware/tegra/ivc.c
> new file mode 100644
> index 000000000000..3e736bb9915a
> --- /dev/null
> +++ b/drivers/firmware/tegra/ivc.c
> @@ -0,0 +1,659 @@
> +/*
> + * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/module.h>
> +
> +#include <soc/tegra/ivc.h>
> +
> +#define IVC_ALIGN 64
> +
> +#ifdef CONFIG_SMP
> +
> +static inline void ivc_rmb(void)
> +{
> +       smp_rmb();
> +}
> +
> +static inline void ivc_wmb(void)
> +{
> +       smp_wmb();
> +}
> +
> +static inline void ivc_mb(void)
> +{
> +       smp_mb();
> +}
> +
> +#else
> +
> +static inline void ivc_rmb(void)
> +{
> +       rmb();
> +}
> +
> +static inline void ivc_wmb(void)
> +{
> +       wmb();
> +}
> +
> +static inline void ivc_mb(void)
> +{
> +       mb();
> +}
> +
> +#endif
> +
> +/*
> + * IVC channel reset protocol.
> + *
> + * Each end uses its tx_channel.state to indicate its synchronization state.
> + */
> +enum ivc_state {
> +       /*
> +        * This value is zero for backwards compatibility with services that
> +        * assume channels to be initially zeroed. Such channels are in an
> +        * initially valid state, but cannot be asynchronously reset, and must
> +        * maintain a valid state at all times.
> +        *
> +        * The transmitting end can enter the established state from the sync or
> +        * ack state when it observes the receiving endpoint in the ack or
> +        * established state, indicating that has cleared the counters in our
> +        * rx_channel.
> +        */
> +       ivc_state_established = 0,
> +
> +       /*
> +        * If an endpoint is observed in the sync state, the remote endpoint is
> +        * allowed to clear the counters it owns asynchronously with respect to
> +        * the current endpoint. Therefore, the current endpoint is no longer
> +        * allowed to communicate.
> +        */
> +       ivc_state_sync,
> +
> +       /*
> +        * When the transmitting end observes the receiving end in the sync
> +        * state, it can clear the w_count and r_count and transition to the ack
> +        * state. If the remote endpoint observes us in the ack state, it can
> +        * return to the established state once it has cleared its counters.
> +        */
> +       ivc_state_ack
> +};
> +
> +/*
> + * This structure is divided into two-cache aligned parts, the first is only

Should read "two cache-aligned" maybe?

> + * written through the tx_channel pointer, while the second is only written
> + * through the rx_channel pointer. This delineates ownership of the cache lines,
> + * which is critical to performance and necessary in non-cache coherent
> + * implementations.
> + */
> +struct ivc_channel_header {
> +       union {
> +               struct {
> +                       /* fields owned by the transmitting end */

Fields? According to the context I would say "frames?"

> +                       uint32_t w_count;
> +                       uint32_t state;
> +               };
> +               uint8_t w_align[IVC_ALIGN];
> +       };
> +       union {
> +               /* fields owned by the receiving end */

Same here.

> +               uint32_t r_count;
> +               uint8_t r_align[IVC_ALIGN];
> +       };
> +};
> +
> +static inline void ivc_invalidate_counter(struct ivc *ivc,
> +               dma_addr_t handle)
> +{
> +       if (!ivc->peer_device)
> +               return;
> +       dma_sync_single_for_cpu(ivc->peer_device, handle, IVC_ALIGN,
> +                       DMA_FROM_DEVICE);
> +}
> +
> +static inline void ivc_flush_counter(struct ivc *ivc, dma_addr_t handle)
> +{
> +       if (!ivc->peer_device)
> +               return;
> +       dma_sync_single_for_device(ivc->peer_device, handle, IVC_ALIGN,
> +                       DMA_TO_DEVICE);
> +}
> +
> +static inline int ivc_channel_empty(struct ivc *ivc,
> +               struct ivc_channel_header *ch)

This function should probably return bool.

> +{
> +       /*
> +        * This function performs multiple checks on the same values with
> +        * security implications, so create snapshots with ACCESS_ONCE() to
> +        * ensure that these checks use the same values.
> +        */
> +       uint32_t w_count = ACCESS_ONCE(ch->w_count);
> +       uint32_t r_count = ACCESS_ONCE(ch->r_count);
> +
> +       /*
> +        * Perform an over-full check to prevent denial of service attacks where
> +        * a server could be easily fooled into believing that there's an
> +        * extremely large number of frames ready, since receivers are not
> +        * expected to check for full or over-full conditions.
> +        *
> +        * Although the channel isn't empty, this is an invalid case caused by
> +        * a potentially malicious peer, so returning empty is safer, because it
> +        * gives the impression that the channel has gone silent.
> +        */
> +       if (w_count - r_count > ivc->nframes)
> +               return 1;
> +
> +       return w_count == r_count;
> +}
> +
> +static inline int ivc_channel_full(struct ivc *ivc,
> +               struct ivc_channel_header *ch)

And this one too.

> +{
> +       /*
> +        * Invalid cases where the counters indicate that the queue is over
> +        * capacity also appear full.
> +        */
> +       return ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count)
> +               >= ivc->nframes;
> +}
> +
> +static inline uint32_t ivc_channel_avail_count(struct ivc *ivc,
> +               struct ivc_channel_header *ch)
> +{
> +       /*
> +        * This function isn't expected to be used in scenarios where an
> +        * over-full situation can lead to denial of service attacks. See the
> +        * comment in ivc_channel_empty() for an explanation about special
> +        * over-full considerations.
> +        */
> +       return ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count);
> +}
> +
> +static inline void ivc_advance_tx(struct ivc *ivc)
> +{
> +       ACCESS_ONCE(ivc->tx_channel->w_count) =
> +               ACCESS_ONCE(ivc->tx_channel->w_count) + 1;
> +
> +       if (ivc->w_pos == ivc->nframes - 1)
> +               ivc->w_pos = 0;
> +       else
> +               ivc->w_pos++;
> +}
> +
> +static inline void ivc_advance_rx(struct ivc *ivc)
> +{
> +       ACCESS_ONCE(ivc->rx_channel->r_count) =
> +               ACCESS_ONCE(ivc->rx_channel->r_count) + 1;
> +
> +       if (ivc->r_pos == ivc->nframes - 1)
> +               ivc->r_pos = 0;
> +       else
> +               ivc->r_pos++;
> +}
> +
> +static inline int ivc_check_read(struct ivc *ivc)
> +{
> +       /*
> +        * tx_channel->state is set locally, so it is not synchronized with
> +        * state from the remote peer. The remote peer cannot reset its
> +        * transmit counters until we've acknowledged its synchronization
> +        * request, so no additional synchronization is required because an
> +        * asynchronous transition of rx_channel->state to ivc_state_ack is not
> +        * allowed.
> +        */
> +       if (ivc->tx_channel->state != ivc_state_established)
> +               return -ECONNRESET;
> +
> +       /*
> +        * Avoid unnecessary invalidations when performing repeated accesses to
> +        * an IVC channel by checking the old queue pointers first.
> +        * Synchronization is only necessary when these pointers indicate empty
> +        * or full.
> +        */
> +       if (!ivc_channel_empty(ivc, ivc->rx_channel))
> +               return 0;
> +
> +       ivc_invalidate_counter(ivc, ivc->rx_handle +
> +                       offsetof(struct ivc_channel_header, w_count));
> +       return ivc_channel_empty(ivc, ivc->rx_channel) ? -ENOMEM : 0;
> +}
> +
> +static inline int ivc_check_write(struct ivc *ivc)
> +{
> +       if (ivc->tx_channel->state != ivc_state_established)
> +               return -ECONNRESET;
> +
> +       if (!ivc_channel_full(ivc, ivc->tx_channel))
> +               return 0;
> +
> +       ivc_invalidate_counter(ivc, ivc->tx_handle +
> +                       offsetof(struct ivc_channel_header, r_count));
> +       return ivc_channel_full(ivc, ivc->tx_channel) ? -ENOMEM : 0;
> +}
> +
> +static void *ivc_frame_pointer(struct ivc *ivc, struct ivc_channel_header *ch,
> +               uint32_t frame)
> +{
> +       BUG_ON(frame >= ivc->nframes);
> +       return (void *)((uintptr_t)(ch + 1) + ivc->frame_size * frame);
> +}
> +
> +static inline dma_addr_t ivc_frame_handle(struct ivc *ivc,
> +               dma_addr_t channel_handle, uint32_t frame)
> +{
> +       BUG_ON(!ivc->peer_device);
> +       BUG_ON(frame >= ivc->nframes);
> +       return channel_handle + sizeof(struct ivc_channel_header) +
> +               ivc->frame_size * frame;
> +}
> +
> +static inline void ivc_invalidate_frame(struct ivc *ivc,
> +               dma_addr_t channel_handle, unsigned frame, int offset, int len)
> +{
> +       if (!ivc->peer_device)
> +               return;
> +       dma_sync_single_for_cpu(ivc->peer_device,
> +                       ivc_frame_handle(ivc, channel_handle, frame) + offset,
> +                       len, DMA_FROM_DEVICE);
> +}
> +
> +static inline void ivc_flush_frame(struct ivc *ivc, dma_addr_t channel_handle,
> +               unsigned frame, int offset, int len)
> +{
> +       if (!ivc->peer_device)
> +               return;
> +       dma_sync_single_for_device(ivc->peer_device,
> +                       ivc_frame_handle(ivc, channel_handle, frame) + offset,
> +                       len, DMA_TO_DEVICE);
> +}
> +
> +/* directly peek at the next frame rx'ed */
> +void *tegra_ivc_read_get_next_frame(struct ivc *ivc)
> +{
> +       int result = ivc_check_read(ivc);
> +       if (result)
> +               return ERR_PTR(result);
> +
> +       /*
> +        * Order observation of w_pos potentially indicating new data before
> +        * data read.
> +        */
> +       ivc_rmb();
> +
> +       ivc_invalidate_frame(ivc, ivc->rx_handle, ivc->r_pos, 0,
> +                       ivc->frame_size);
> +       return ivc_frame_pointer(ivc, ivc->rx_channel, ivc->r_pos);
> +}
> +EXPORT_SYMBOL(tegra_ivc_read_get_next_frame);
> +
> +int tegra_ivc_read_advance(struct ivc *ivc)
> +{
> +       /*
> +        * No read barriers or synchronization here: the caller is expected to
> +        * have already observed the channel non-empty. This check is just to
> +        * catch programming errors.
> +        */
> +       int result = ivc_check_read(ivc);
> +       if (result)
> +               return result;
> +
> +       ivc_advance_rx(ivc);
> +       ivc_flush_counter(ivc, ivc->rx_handle +
> +                       offsetof(struct ivc_channel_header, r_count));

This function is called quite a few times, and every time you have
this cumbersome offsetof. In practice you can only flush one of two
things: the write counter (first 64 bits of the header) or the read
counter (second part). Maybe you can specify which one you want to
flush through an extra argument to ivc_flush_counter (say, enum {
COUNTER_RD, COUNTER_WR }), and perform the offsetof there according to
the value of the argument? Same for ivc_invalidate_counter.

> +
> +       /*
> +        * Ensure our write to r_pos occurs before our read from w_pos.
> +        */
> +       ivc_mb();
> +
> +       /*
> +        * Notify only upon transition from full to non-full.
> +        * The available count can only asynchronously increase, so the
> +        * worst possible side-effect will be a spurious notification.
> +        */
> +       ivc_invalidate_counter(ivc, ivc->rx_handle +
> +               offsetof(struct ivc_channel_header, w_count));
> +
> +       if (ivc_channel_avail_count(ivc, ivc->rx_channel) == ivc->nframes - 1)
> +               ivc->notify(ivc);
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tegra_ivc_read_advance);
> +
> +/* directly poke at the next frame to be tx'ed */
> +void *tegra_ivc_write_get_next_frame(struct ivc *ivc)
> +{
> +       int result = ivc_check_write(ivc);
> +       if (result)
> +               return ERR_PTR(result);
> +
> +       return ivc_frame_pointer(ivc, ivc->tx_channel, ivc->w_pos);
> +}
> +EXPORT_SYMBOL(tegra_ivc_write_get_next_frame);
> +
> +/* advance the tx buffer */
> +int tegra_ivc_write_advance(struct ivc *ivc)
> +{
> +       int result = ivc_check_write(ivc);
> +       if (result)
> +               return result;
> +
> +       ivc_flush_frame(ivc, ivc->tx_handle, ivc->w_pos, 0, ivc->frame_size);
> +
> +       /*
> +        * Order any possible stores to the frame before update of w_pos.
> +        */
> +       ivc_wmb();
> +
> +       ivc_advance_tx(ivc);
> +       ivc_flush_counter(ivc, ivc->tx_handle +
> +                       offsetof(struct ivc_channel_header, w_count));
> +
> +       /*
> +        * Ensure our write to w_pos occurs before our read from r_pos.
> +        */
> +       ivc_mb();
> +
> +       /*
> +        * Notify only upon transition from empty to non-empty.
> +        * The available count can only asynchronously decrease, so the
> +        * worst possible side-effect will be a spurious notification.
> +        */
> +       ivc_invalidate_counter(ivc, ivc->tx_handle +
> +               offsetof(struct ivc_channel_header, r_count));
> +
> +       if (ivc_channel_avail_count(ivc, ivc->tx_channel) == 1)
> +               ivc->notify(ivc);
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tegra_ivc_write_advance);
> +
> +void tegra_ivc_channel_reset(struct ivc *ivc)
> +{
> +       ivc->tx_channel->state = ivc_state_sync;
> +       ivc_flush_counter(ivc, ivc->tx_handle +
> +                       offsetof(struct ivc_channel_header, w_count));
> +       ivc->notify(ivc);
> +}
> +EXPORT_SYMBOL(tegra_ivc_channel_reset);
> +
> +/*
> + * ===============================================================
> + *  IVC State Transition Table - see tegra_ivc_channel_notified()
> + * ===============================================================
> + *
> + *     local   remote  action
> + *     -----   ------  -----------------------------------
> + *     SYNC    EST     <none>
> + *     SYNC    ACK     reset counters; move to EST; notify
> + *     SYNC    SYNC    reset counters; move to ACK; notify
> + *     ACK     EST     move to EST; notify
> + *     ACK     ACK     move to EST; notify
> + *     ACK     SYNC    reset counters; move to ACK; notify
> + *     EST     EST     <none>
> + *     EST     ACK     <none>
> + *     EST     SYNC    reset counters; move to ACK; notify
> + *
> + * ===============================================================
> + */
> +
> +int tegra_ivc_channel_notified(struct ivc *ivc)
> +{
> +       enum ivc_state peer_state;
> +
> +       /* Copy the receiver's state out of shared memory. */
> +       ivc_invalidate_counter(ivc, ivc->rx_handle +
> +                       offsetof(struct ivc_channel_header, w_count));
> +       peer_state = ACCESS_ONCE(ivc->rx_channel->state);
> +
> +       if (peer_state == ivc_state_sync) {
> +               /*
> +                * Order observation of ivc_state_sync before stores clearing
> +                * tx_channel.
> +                */
> +               ivc_rmb();
> +
> +               /*
> +                * Reset tx_channel counters. The remote end is in the SYNC
> +                * state and won't make progress until we change our state,
> +                * so the counters are not in use at this time.
> +                */
> +               ivc->tx_channel->w_count = 0;
> +               ivc->rx_channel->r_count = 0;
> +
> +               ivc->w_pos = 0;
> +               ivc->r_pos = 0;
> +
> +               /*
> +                * Ensure that counters appear cleared before new state can be
> +                * observed.
> +                */
> +               ivc_wmb();
> +
> +               /*
> +                * Move to ACK state. We have just cleared our counters, so it
> +                * is now safe for the remote end to start using these values.
> +                */
> +               ivc->tx_channel->state = ivc_state_ack;
> +               ivc_flush_counter(ivc, ivc->tx_handle +
> +                               offsetof(struct ivc_channel_header, w_count));
> +
> +               /*
> +                * Notify remote end to observe state transition.
> +                */
> +               ivc->notify(ivc);
> +
> +       } else if (ivc->tx_channel->state == ivc_state_sync &&
> +                       peer_state == ivc_state_ack) {
> +               /*
> +                * Order observation of ivc_state_sync before stores clearing
> +                * tx_channel.
> +                */
> +               ivc_rmb();
> +
> +               /*
> +                * Reset tx_channel counters. The remote end is in the ACK
> +                * state and won't make progress until we change our state,
> +                * so the counters are not in use at this time.
> +                */
> +               ivc->tx_channel->w_count = 0;
> +               ivc->rx_channel->r_count = 0;
> +
> +               ivc->w_pos = 0;
> +               ivc->r_pos = 0;
> +
> +               /*
> +                * Ensure that counters appear cleared before new state can be
> +                * observed.
> +                */
> +               ivc_wmb();
> +
> +               /*
> +                * Move to ESTABLISHED state. We know that the remote end has
> +                * already cleared its counters, so it is safe to start
> +                * writing/reading on this channel.
> +                */
> +               ivc->tx_channel->state = ivc_state_established;
> +               ivc_flush_counter(ivc, ivc->tx_handle +
> +                               offsetof(struct ivc_channel_header, w_count));
> +
> +               /*
> +                * Notify remote end to observe state transition.
> +                */
> +               ivc->notify(ivc);
> +
> +       } else if (ivc->tx_channel->state == ivc_state_ack) {
> +               /*
> +                * At this point, we have observed the peer to be in either
> +                * the ACK or ESTABLISHED state. Next, order observation of
> +                * peer state before storing to tx_channel.
> +                */
> +               ivc_rmb();
> +
> +               /*
> +                * Move to ESTABLISHED state. We know that we have previously
> +                * cleared our counters, and we know that the remote end has
> +                * cleared its counters, so it is safe to start writing/reading
> +                * on this channel.
> +                */
> +               ivc->tx_channel->state = ivc_state_established;
> +               ivc_flush_counter(ivc, ivc->tx_handle +
> +                               offsetof(struct ivc_channel_header, w_count));
> +
> +               /*
> +                * Notify remote end to observe state transition.
> +                */
> +               ivc->notify(ivc);
> +
> +       } else {
> +               /*
> +                * There is no need to handle any further action. Either the
> +                * channel is already fully established, or we are waiting for
> +                * the remote end to catch up with our current state. Refer
> +                * to the diagram in "IVC State Transition Table" above.
> +                */
> +       }
> +
> +       return ivc->tx_channel->state == ivc_state_established ? 0 : -EAGAIN;
> +}
> +EXPORT_SYMBOL(tegra_ivc_channel_notified);
> +
> +size_t tegra_ivc_align(size_t size)
> +{
> +       return (size + (IVC_ALIGN - 1)) & ~(IVC_ALIGN - 1);

return ALIGN(size, IVC_ALIGN)?

> +}
> +EXPORT_SYMBOL(tegra_ivc_align);
> +
> +unsigned tegra_ivc_total_queue_size(unsigned queue_size)
> +{
> +       if (queue_size & (IVC_ALIGN - 1)) {
> +               pr_err("%s: queue_size (%u) must be %u-byte aligned\n",
> +                               __func__, queue_size, IVC_ALIGN);
> +               return 0;
> +       }
> +       return queue_size + sizeof(struct ivc_channel_header);
> +}
> +EXPORT_SYMBOL(tegra_ivc_total_queue_size);
> +
> +static int check_ivc_params(uintptr_t queue_base1, uintptr_t queue_base2,
> +               unsigned nframes, unsigned frame_size)
> +{
> +       BUG_ON(offsetof(struct ivc_channel_header, w_count) & (IVC_ALIGN - 1));
> +       BUG_ON(offsetof(struct ivc_channel_header, r_count) & (IVC_ALIGN - 1));
> +       BUG_ON(sizeof(struct ivc_channel_header) & (IVC_ALIGN - 1));

These checks are done on purely static data, we don't need to do it
here, for each channel... If there a way to have them performed at
compilation time instead? Since these constraints must be enforced,
they should also be specified as a comment to struct
ivc_channel_header to avoid unwanted modifications.

Mmm, or thinking twice, since the condition can be evaluated at
compilation time, maybe the compiler will optimize these out entirely?
In that case, a better place to do this would be tegra_ivc_init() - we
want the failure to be reported as early as possible.

> +
> +       if ((uint64_t)nframes * (uint64_t)frame_size >= 0x100000000) {
> +               pr_err("nframes * frame_size overflows\n");
> +               return -EINVAL;
> +       }
> +
> +       /*
> +        * The headers must at least be aligned enough for counters
> +        * to be accessed atomically.
> +        */
> +       if (queue_base1 & (IVC_ALIGN - 1)) {
> +               pr_err("ivc channel start not aligned: %lx\n", queue_base1);
> +               return -EINVAL;
> +       }
> +       if (queue_base2 & (IVC_ALIGN - 1)) {
> +               pr_err("ivc channel start not aligned: %lx\n", queue_base2);
> +               return -EINVAL;
> +       }
> +
> +       if (frame_size & (IVC_ALIGN - 1)) {
> +               pr_err("frame size not adequately aligned: %u\n", frame_size);
> +               return -EINVAL;
> +       }
> +
> +       if (queue_base1 < queue_base2) {
> +               if (queue_base1 + frame_size * nframes > queue_base2) {
> +                       pr_err("queue regions overlap: %lx + %x, %x\n",
> +                                       queue_base1, frame_size,
> +                                       frame_size * nframes);
> +                       return -EINVAL;
> +               }
> +       } else {
> +               if (queue_base2 + frame_size * nframes > queue_base1) {
> +                       pr_err("queue regions overlap: %lx + %x, %x\n",
> +                                       queue_base2, frame_size,
> +                                       frame_size * nframes);
> +                       return -EINVAL;
> +               }
> +       }
> +
> +       return 0;
> +}
> +
> +int tegra_ivc_init(struct ivc *ivc, uintptr_t rx_base, dma_addr_t rx_handle,
> +                  uintptr_t tx_base, dma_addr_t tx_handle, unsigned nframes,
> +                  unsigned frame_size, struct device *peer_device,
> +                  void (*notify)(struct ivc *))
> +{
> +       size_t queue_size;
> +
> +       int result = check_ivc_params(rx_base, tx_base, nframes, frame_size);
> +       if (result)
> +               return result;
> +
> +       BUG_ON(!ivc);
> +       BUG_ON(!notify);

Why BUG_ON and not return -EINVAL? Is this really unrecoverable?
Doesn't seem so, and later in this function you return error
conditions for other errors...

> +
> +       queue_size = tegra_ivc_total_queue_size(nframes * frame_size);
> +
> +       /*
> +        * All sizes that can be returned by communication functions should
> +        * fit in an int.
> +        */
> +       if (frame_size > INT_MAX)
> +               return -E2BIG;
> +
> +       ivc->rx_channel = (struct ivc_channel_header *)rx_base;
> +       ivc->tx_channel = (struct ivc_channel_header *)tx_base;
> +
> +       if (peer_device) {
> +               if (rx_handle != DMA_ERROR_CODE) {

This looks more complicated than it needs to be - in practice,
tx_handle and rx_handle are always DMA_ERROR_CODE when you call this
function from the BPMP code, and this block will never get used.

Furthermore, ivc_flush_*() and ivc_invalidate_*() only rely on
peer_device to decide whether they need to call dma_sync. Calling
these functions on an unmapped page is an invalid use of the DMA API,
so the case where rx_handle != DMA_ERROR_CODE is invalid anyway.

Isn't it possible to remove these rx_handle/tx_handle arguments
altogether and thus simplify this function?

> +                       ivc->rx_handle = rx_handle;
> +                       ivc->tx_handle = tx_handle;
> +               } else {
> +                       ivc->rx_handle = dma_map_single(peer_device,
> +                               ivc->rx_channel, queue_size, DMA_BIDIRECTIONAL);
> +                       if (ivc->rx_handle == DMA_ERROR_CODE)
> +                               return -ENOMEM;
> +
> +                       ivc->tx_handle = dma_map_single(peer_device,
> +                               ivc->tx_channel, queue_size, DMA_BIDIRECTIONAL);
> +                       if (ivc->tx_handle == DMA_ERROR_CODE) {
> +                               dma_unmap_single(peer_device, ivc->rx_handle,
> +                                       queue_size, DMA_BIDIRECTIONAL);
> +                               return -ENOMEM;
> +                       }

When do we unmap these pages btw? I know the BPMP driver is probably
never going to be unloaded, but we should probably have
tegra_ivc_cleanup somewhere since other potential users may make use
of it.

> +               }
> +       }
> +
> +       ivc->notify = notify;
> +       ivc->frame_size = frame_size;
> +       ivc->nframes = nframes;
> +       ivc->peer_device = peer_device;
> +
> +       /*
> +        * These values aren't necessarily correct until the channel has been
> +        * reset.
> +        */
> +       ivc->w_pos = 0;
> +       ivc->r_pos = 0;
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(tegra_ivc_init);
> diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h
> new file mode 100644
> index 000000000000..1762fbee3fa2
> --- /dev/null
> +++ b/include/soc/tegra/ivc.h
> @@ -0,0 +1,102 @@
> +/*
> + * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#ifndef __TEGRA_IVC_H
> +
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/types.h>
> +
> +struct ivc_channel_header;
> +
> +struct ivc {

I'd rename this to tegra_ivc to avoid potential name collisions (and
since all using functions are prefixed with tegra_ivc).

> +       struct ivc_channel_header *rx_channel, *tx_channel;
> +       uint32_t w_pos, r_pos;
> +
> +       void (*notify)(struct ivc *);
> +       uint32_t nframes, frame_size;
> +
> +       struct device *peer_device;
> +       dma_addr_t rx_handle, tx_handle;
> +};
> +
> +/**
> + * tegra_ivc_read_get_next_frame - Peek at the next frame to receive
> + * @ivc                pointer of the IVC channel
> + *
> + * Peek at the next frame to be received, without removing it from
> + * the queue.
> + *
> + * Returns a pointer to the frame, or an error encoded pointer.
> + */
> +void *tegra_ivc_read_get_next_frame(struct ivc *ivc);
> +
> +/**
> + * tegra_ivc_read_advance - Advance the read queue
> + * @ivc                pointer of the IVC channel
> + *
> + * Advance the read queue
> + *
> + * Returns 0, or a negative error value if failed.
> + */
> +int tegra_ivc_read_advance(struct ivc *ivc);
> +
> +/**
> + * tegra_ivc_write_get_next_frame - Poke at the next frame to transmit
> + * @ivc                pointer of the IVC channel
> + *
> + * Get access to the next frame.
> + *
> + * Returns a pointer to the frame, or an error encoded pointer.
> + */
> +void *tegra_ivc_write_get_next_frame(struct ivc *ivc);
> +
> +/**
> + * tegra_ivc_write_advance - Advance the write queue
> + * @ivc                pointer of the IVC channel
> + *
> + * Advance the write queue
> + *
> + * Returns 0, or a negative error value if failed.
> + */
> +int tegra_ivc_write_advance(struct ivc *ivc);
> +
> +/**
> + * tegra_ivc_channel_notified - handle internal messages
> + * @ivc                pointer of the IVC channel
> + *
> + * This function must be called following every notification.
> + *
> + * Returns 0 if the channel is ready for communication, or -EAGAIN if a channel
> + * reset is in progress.
> + */
> +int tegra_ivc_channel_notified(struct ivc *ivc);
> +
> +/**
> + * tegra_ivc_channel_reset - initiates a reset of the shared memory state
> + * @ivc                pointer of the IVC channel
> + *
> + * This function must be called after a channel is reserved before it is used
> + * for communication. The channel will be ready for use when a subsequent call
> + * to notify the remote of the channel reset.
> + */
> +void tegra_ivc_channel_reset(struct ivc *ivc);
> +
> +size_t tegra_ivc_align(size_t size);
> +unsigned tegra_ivc_total_queue_size(unsigned queue_size);
> +int tegra_ivc_init(struct ivc *ivc, uintptr_t rx_base, dma_addr_t rx_handle,
> +                  uintptr_t tx_base, dma_addr_t tx_handle, unsigned nframes,
> +                  unsigned frame_size, struct device *peer_device,
> +                  void (*notify)(struct ivc *));
> +
> +#endif /* __TEGRA_IVC_H */
> --
> 2.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux