Add DT binding for the Hardware Synchronization Primitives (HSP). The
HSP is designed for the processors to share resources and communicate
together. It provides a set of hardware synchronization primitives for
interprocessor communication. So the interprocessor communication (IPC)
protocols can use hardware synchronization primitive, when operating
between two processors not in an SMP relationship.
Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx>
---
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 42 ++++++++++++++++++++++
include/dt-bindings/mailbox/tegra-hsp.h | 20 +++++++++++
2 files changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 include/dt-bindings/mailbox/tegra-hsp.h
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
new file mode 100644
index 000000000000..ca07af2d951e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
@@ -0,0 +1,42 @@
+NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+The HSP modules are used for the processors to share resources and communicate
+together. It provides a set of hardware synchronization primitives for
+interprocessor communication. So the interprocessor communication (IPC)
+protocols can use hardware synchronization primitives, when operating between
+two processors not in an SMP relationship.
+
+The features that HSP supported are shared mailboxes, shared semaphores,
+arbitrated semaphores and doorbells.
+
+Required properties:
+- name : Should be hsp
+- compatible : Should be "nvidia,tegra<chip>-hsp"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain the HSP interrupts
+- interrupt-names: Should contain the names of the HSP interrupts that the
+ client are using.
+ "doorbell"
+- nvidia,hsp-function : Specifies one of the HSP functions that the HSP unit
+ will be supported. The function ID can be found in the
+ header file <dt-bindings/mailbox/tegra-hsp.h>.
+- #mbox-cells : Should be 1. Specifies the HSP master that will be enabled of
+ the HSP client. The master ID constants can be found in the
+ header file <dt-bindings/mailbox/tegra-hsp.h>.
+
+Example:
+
+hsp_top: hsp@3c00000 {
+ compatible = "nvidia,tegra186-hsp";
+ reg = <0x0 0x03c00000 0x0 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell";
+ nvidia,hsp-function = <HSP_DOORBELL>;
+ #mbox-cells = <1>;
+};
+
+bpmp@d0000000 {
+ ...
+ mboxes = <&hsp_top HSP_DB_MASTER_BPMP>;
+ ...
+};
diff --git a/include/dt-bindings/mailbox/tegra-hsp.h b/include/dt-bindings/mailbox/tegra-hsp.h
new file mode 100644
index 000000000000..720c66784b72
--- /dev/null
+++ b/include/dt-bindings/mailbox/tegra-hsp.h
@@ -0,0 +1,20 @@
+/*
+ * This header provides constants for binding nvidia,tegra<chip>-hsp.
+ *
+ * The number with HSP_DB_MASTER prefix indicates the bit that is
+ * associated with a master ID in the doorbell registers.
+ */
+
+
+#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+
+#define HSP_SHARED_MAILBOX 0
+#define HSP_SHARED_SEMAPHORE 1
+#define HSP_ARBITRATED_SEMAPHORE 2
+#define HSP_DOORBELL 3
+
+#define HSP_DB_MASTER_CCPLEX 17
+#define HSP_DB_MASTER_BPMP 19
+
+#endif /* _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H */
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
