Re: [PATCH V6 9/9] irqchip/gic: Add platform driver for non-root GICs that require RPM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

On 13/06/16 10:10, Marc Zyngier wrote:
> Hi Jon,
> 
> On 07/06/16 16:12, Jon Hunter wrote:
>> Add a platform driver to support non-root GICs that require runtime
>> power-management. Currently, only non-root GICs are supported because
>> the functions, smp_cross_call() and set_handle_irq(), that need to
>> be called for a root controller are located in the __init section and
>> so cannot be called by the platform driver.
>>
>> The GIC platform driver re-uses many functions from the existing GIC
>> driver including some functions to save and restore the GIC context
>> during power transitions. The functions for saving and restoring the
>> GIC context are currently only defined if CONFIG_CPU_PM is enabled and
>> to ensure that these functions are always defined when the platform
>> driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the
>> platform driver) has been added.
>>
>> In order to re-use the private GIC initialisation code, a new public
>> function, gic_of_init_child(), has been added which calls various
>> private functions to initialise the GIC. This is different from the
>> existing gic_of_init() because it only supports non-root GICs (ie. does
>> not call smp_cross_call() is set_handle_irq()) and is not located in
>> the __init section (so can be used by platform drivers). Furthermore,
>> gic_of_init_child() dynamically allocates memory for the GIC chip data
>> which is also different from gic_of_init().
>>
>> There is no specific suspend handling for GICs registered as platform
>> devices. Non-wakeup interrupts will be disabled by the kernel during
>> late suspend, however, this alone will not power down the GIC if
>> interrupts have been requested and not freed. Therefore, requestors of
>> non-wakeup interrupts will need to free them on entering suspend in
>> order to power-down the GIC.
>>
>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
>> ---
>>  drivers/irqchip/Kconfig         |   6 ++
>>  drivers/irqchip/Makefile        |   1 +
>>  drivers/irqchip/irq-gic-pm.c    | 184 ++++++++++++++++++++++++++++++++++++++++
>>  drivers/irqchip/irq-gic.c       |  38 ++++++++-
>>  include/linux/irqchip/arm-gic.h |   6 ++
>>  5 files changed, 232 insertions(+), 3 deletions(-)
>>  create mode 100644 drivers/irqchip/irq-gic-pm.c
>>
>> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
>> index fa33c50b0e5a..5495a5ba8039 100644
>> --- a/drivers/irqchip/Kconfig
>> +++ b/drivers/irqchip/Kconfig
>> @@ -8,6 +8,12 @@ config ARM_GIC
>>  	select IRQ_DOMAIN_HIERARCHY
>>  	select MULTI_IRQ_HANDLER
>>  
>> +config ARM_GIC_PM
>> +	bool
>> +	depends on PM
>> +	select ARM_GIC
>> +	select PM_CLK
>> +
>>  config ARM_GIC_MAX_NR
>>  	int
>>  	default 2 if ARCH_REALVIEW
>> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
>> index 38853a187607..bd0257e0aab6 100644
>> --- a/drivers/irqchip/Makefile
>> +++ b/drivers/irqchip/Makefile
>> @@ -24,6 +24,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
>>  obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
>>  obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
>>  obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
>> +obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
>>  obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
>>  obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
>>  obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
>> diff --git a/drivers/irqchip/irq-gic-pm.c b/drivers/irqchip/irq-gic-pm.c
>> new file mode 100644
>> index 000000000000..4cbffba3ff13
>> --- /dev/null
>> +++ b/drivers/irqchip/irq-gic-pm.c
>> @@ -0,0 +1,184 @@
>> +/*
>> + * Copyright (C) 2016 NVIDIA CORPORATION, All Rights Reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/clk.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/irqchip/arm-gic.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_clock.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/slab.h>
>> +
>> +struct gic_clk_data {
>> +	unsigned int num_clocks;
>> +	const char *const *clocks;
>> +};
>> +
>> +static int gic_runtime_resume(struct device *dev)
>> +{
>> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = pm_clk_resume(dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/*
>> +	 * On the very first resume, the pointer to the driver data
>> +	 * will be NULL and this is intentional, because we do not
>> +	 * want to restore the GIC on the very first resume. So if
>> +	 * the pointer is not valid just return.
>> +	 */
>> +	if (!gic)
>> +		return 0;
>> +
>> +	gic_dist_restore(gic);
>> +	gic_cpu_restore(gic);
>> +
>> +	return 0;
>> +}
>> +
>> +static int gic_runtime_suspend(struct device *dev)
>> +{
>> +	struct gic_chip_data *gic = dev_get_drvdata(dev);
>> +
>> +	gic_dist_save(gic);
>> +	gic_cpu_save(gic);
>> +
>> +	return pm_clk_suspend(dev);
>> +}
>> +
>> +static int gic_get_clocks(struct device *dev, const struct gic_clk_data *data)
>> +{
>> +	struct clk *clk;
>> +	unsigned int i;
>> +	int ret;
>> +
>> +	if (!dev || !data)
>> +		return -EINVAL;
>> +
>> +	ret = pm_clk_create(dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	for (i = 0; i < data->num_clocks; i++) {
>> +		clk = of_clk_get_by_name(dev->of_node, data->clocks[i]);
>> +		if (IS_ERR(clk)) {
>> +			dev_err(dev, "failed to get clock %s\n",
>> +				data->clocks[i]);
>> +			ret = PTR_ERR(clk);
>> +			goto error;
>> +		}
>> +
>> +		ret = pm_clk_add_clk(dev, clk);
>> +		if (ret) {
>> +			dev_err(dev, "failed to add clock at index %d\n", i);
>> +			clk_put(clk);
>> +			goto error;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +
>> +error:
>> +	pm_clk_destroy(dev);
>> +
>> +	return ret;
>> +}
>> +
>> +static int gic_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	const struct gic_clk_data *data;
>> +	struct gic_chip_data *gic;
>> +	int ret, irq;
>> +
>> +	data = of_device_get_match_data(&pdev->dev);
>> +	if (!data) {
>> +		dev_err(&pdev->dev, "no device match found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	irq = irq_of_parse_and_map(dev->of_node, 0);
>> +	if (!irq) {
>> +		dev_err(dev, "no parent interrupt found!\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = gic_get_clocks(dev, data);
>> +	if (ret)
>> +		goto irq_dispose;
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	ret = pm_runtime_get_sync(dev);
>> +	if (ret < 0)
>> +		goto rpm_disable;
>> +
>> +	ret = gic_of_init_child(dev, &gic, irq);
>> +	if (ret)
>> +		goto rpm_put;
>> +
>> +	platform_set_drvdata(pdev, gic);
>> +
>> +	pm_runtime_put(dev);
>> +
>> +	dev_info(dev, "GIC IRQ controller registered\n");
>> +
>> +	return 0;
>> +
>> +rpm_put:
>> +	pm_runtime_put_sync(dev);
>> +rpm_disable:
>> +	pm_runtime_disable(dev);
>> +	pm_clk_destroy(dev);
>> +irq_dispose:
>> +	irq_dispose_mapping(irq);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct dev_pm_ops gic_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(gic_runtime_suspend,
>> +			   gic_runtime_resume, NULL)
>> +};
>> +
>> +static const char * const gic400_clocks[] = {
>> +	"clk",
>> +};
>> +
>> +static const struct gic_clk_data gic400_data = {
>> +	.num_clocks = ARRAY_SIZE(gic400_clocks),
>> +	.clocks = gic400_clocks,
>> +};
>> +
>> +static const struct of_device_id gic_match[] = {
>> +	{ .compatible = "nvidia,tegra210-agic",	.data = &gic400_data },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, gic_match);
>> +
>> +static struct platform_driver gic_driver = {
>> +	.probe		= gic_probe,
>> +	.driver		= {
>> +		.name	= "gic",
>> +		.of_match_table	= gic_match,
>> +		.pm	= &gic_pm_ops,
>> +	}
>> +};
>> +
>> +builtin_platform_driver(gic_driver);
>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>> index 141ea5801784..57423f3b218b 100644
>> --- a/drivers/irqchip/irq-gic.c
>> +++ b/drivers/irqchip/irq-gic.c
>> @@ -75,7 +75,7 @@ struct gic_chip_data {
>>  	void __iomem *raw_dist_base;
>>  	void __iomem *raw_cpu_base;
>>  	u32 percpu_offset;
>> -#ifdef CONFIG_CPU_PM
>> +#if defined(CONFIG_CPU_PM) || defined(CONFIG_ARM_GIC_PM)
>>  	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
>>  	u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
>>  	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
>> @@ -528,7 +528,7 @@ int gic_cpu_if_down(unsigned int gic_nr)
>>  	return 0;
>>  }
>>  
>> -#ifdef CONFIG_CPU_PM
>> +#if defined(CONFIG_CPU_PM) || defined(CONFIG_ARM_GIC_PM)
>>  /*
>>   * Saves the GIC distributor registers during suspend or idle.  Must be called
>>   * with interrupts disabled but before powering down the GIC.  After calling
>> @@ -1296,6 +1296,34 @@ error:
>>  	return -ENOMEM;
>>  }
>>  
>> +int gic_of_init_child(struct device *dev, struct gic_chip_data **gic, int irq)
> 
> I got this:
> 
> WARNING: drivers/built-in.o(.text+0x2464): Section mismatch in reference from the function gic_of_init_child() to the function .init.text:gic_of_setup()
> The function gic_of_init_child() references
> the function __init gic_of_setup().
> This is often because gic_of_init_child lacks a __init 
> annotation or the annotation of gic_of_setup is wrong.

Ugh! A lot of the changes were to avoid these section mismatches. Somehow I missed that one :-(
 
> I've fixed it locally by making the function __init.

So gic_of_init_child() cannot be __init because it is called by the driver. If you do this you should get ...

WARNING: drivers/irqchip/built-in.o(.text+0x2314): Section mismatch in reference from the function gic_probe() to the function .init.text:gic_of_init_child()
The function gic_probe() references
the function __init gic_of_init_child().
This is often because gic_probe lacks a __init 
annotation or the annotation of gic_of_init_child is wrong.


The correct fix is ...

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 57423f3b218b..1de07eb5839c 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1272,7 +1272,7 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
        return true;
 }
 
-static int __init gic_of_setup(struct gic_chip_data *gic, struct device_node *node)
+static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node)
 {
        if (!gic || !node)
                return -EINVAL;

Cheers
Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux