From: Thierry Reding <treding@xxxxxxxxxx> All Tegra SoC generations from Tegra20 through Tegra124 have a ChipIdea USB device controller. This set of patches adds very rudimentary support for it to the existing ChipIdea driver and enables them on the set of boards that I could easily test on. I'm sending this out as RFC because I'm not sure yet how to merge this. While the driver seems to work fine (tested by exporting a USB driver or eMMC via the mass storage function) I don't yet understand how to make the driver switch between host and device modes dynamically. It might be useful to get this merged before, but I'd like to have some feedback on this, because doing so would mean that we need to use device mode on the devices where it's enabled and can't use the USBD port in host mode. Thierry Thierry Reding (5): usb: chipidea: Add support for Tegra20/30/114/124 ARM: tegra: Enable UDC on TrimSlice ARM: tegra: Enable UDC on Beaver ARM: tegra: Enable UDC on Dalmore ARM: tegra: Enable UDC on Jetson TK1 arch/arm/boot/dts/tegra114-dalmore.dts | 11 +++ arch/arm/boot/dts/tegra124-jetson-tk1.dts | 13 +++- arch/arm/boot/dts/tegra20-trimslice.dts | 3 + arch/arm/boot/dts/tegra30-beaver.dts | 11 +++ drivers/usb/chipidea/Makefile | 1 + drivers/usb/chipidea/ci_hdrc_tegra.c | 109 ++++++++++++++++++++++++++++++ 6 files changed, 147 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/chipidea/ci_hdrc_tegra.c -- 2.8.3 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
