From: Thierry Reding <treding@xxxxxxxxxx>
Device tree binding for NVIDIA Tegra have traditionally carried the
"nvidia," vendor prefix in the filename. A couple of odd ones don't, so
fix them up for consistency.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
.../devicetree/bindings/ata/nvidia,tegra-ahci.txt | 32 ++
.../devicetree/bindings/ata/tegra-sata.txt | 32 --
.../bindings/dma/nvidia,tegra20-apbdma.txt | 44 +++
.../devicetree/bindings/dma/tegra20-apbdma.txt | 44 ---
.../memory-controllers/nvidia,tegra-emc.txt | 374 +++++++++++++++++++++
.../bindings/memory-controllers/tegra-emc.txt | 374 ---------------------
.../bindings/thermal/nvidia,tegra-soctherm.txt | 67 ++++
.../devicetree/bindings/thermal/tegra-soctherm.txt | 67 ----
8 files changed, 517 insertions(+), 517 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.txt
delete mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt
create mode 100644 Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
delete mode 100644 Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-emc.txt
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
create mode 100644 Documentation/devicetree/bindings/thermal/nvidia,tegra-soctherm.txt
delete mode 100644 Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.txt
new file mode 100644
index 000000000000..66c83c3e8915
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.txt
@@ -0,0 +1,32 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
+ must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
+ is tegra132.
+- reg : Should contain 2 entries:
+ - AHCI register set (SATA BAR5)
+ - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - sata
+ - sata-oob
+ - cml1
+ - pll_e
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - sata
+ - sata-oob
+ - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+ See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+ - sata-phy : XUSB PADCTL SATA PHY
+- hvdd-supply : Defines the SATA HVDD regulator
+- vddio-supply : Defines the SATA VDDIO regulator
+- avdd-supply : Defines the SATA AVDD regulator
+- target-5v-supply : Defines the SATA 5V power regulator
+- target-12v-supply : Defines the SATA 12V power regulator
diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt
deleted file mode 100644
index 66c83c3e8915..000000000000
--- a/Documentation/devicetree/bindings/ata/tegra-sata.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Tegra124 SoC SATA AHCI controller
-
-Required properties :
-- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
- must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
- is tegra132.
-- reg : Should contain 2 entries:
- - AHCI register set (SATA BAR5)
- - SATA register set
-- interrupts : Defines the interrupt used by SATA
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- - sata
- - sata-oob
- - cml1
- - pll_e
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - sata
- - sata-oob
- - sata-cold
-- phys : Must contain an entry for each entry in phy-names.
- See ../phy/phy-bindings.txt for details.
-- phy-names : Must include the following entries:
- - sata-phy : XUSB PADCTL SATA PHY
-- hvdd-supply : Defines the SATA HVDD regulator
-- vddio-supply : Defines the SATA VDDIO regulator
-- avdd-supply : Defines the SATA AVDD regulator
-- target-5v-supply : Defines the SATA 5V power regulator
-- target-12v-supply : Defines the SATA 12V power regulator
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
new file mode 100644
index 000000000000..c6908e7c42cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
@@ -0,0 +1,44 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+ client nodes' dmas properties. The specifier represents the DMA request
+ select value for the peripheral. For more details, consult the Tegra TRM's
+ documentation of the APB DMA channel control register REQ_SEL field.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+ clocks = <&tegra_car 34>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
deleted file mode 100644
index c6908e7c42cc..000000000000
--- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* NVIDIA Tegra APB DMA controller
-
-Required properties:
-- compatible: Should be "nvidia,<chip>-apbdma"
-- reg: Should contain DMA registers location and length. This shuld include
- all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts.
-- clocks: Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - dma
-- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
- client nodes' dmas properties. The specifier represents the DMA request
- select value for the peripheral. For more details, consult the Tegra TRM's
- documentation of the APB DMA channel control register REQ_SEL field.
-
-Examples:
-
-apbdma: dma@6000a000 {
- compatible = "nvidia,tegra20-apbdma";
- reg = <0x6000a000 0x1200>;
- interrupts = < 0 136 0x04
- 0 137 0x04
- 0 138 0x04
- 0 139 0x04
- 0 140 0x04
- 0 141 0x04
- 0 142 0x04
- 0 143 0x04
- 0 144 0x04
- 0 145 0x04
- 0 146 0x04
- 0 147 0x04
- 0 148 0x04
- 0 149 0x04
- 0 150 0x04
- 0 151 0x04 >;
- clocks = <&tegra_car 34>;
- resets = <&tegra_car 34>;
- reset-names = "dma";
- #dma-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-emc.txt
new file mode 100644
index 000000000000..ba0bc3f12419
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-emc.txt
@@ -0,0 +1,374 @@
+NVIDIA Tegra124 SoC EMC (external memory controller)
+====================================================
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-emc".
+- reg : physical base address and length of the controller's registers.
+- nvidia,memory-controller : phandle of the MC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type
+(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
+being its RAM_CODE.
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
+used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
+their unit address.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- The following properties contain EMC timing characterization values
+(specified in the board documentation) :
+ - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
+ - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
+ - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
+ - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
+ - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
+ - nvidia,emc-cfg : EMC_CFG
+ - nvidia,emc-cfg-2 : EMC_CFG_2
+ - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
+ - nvidia,emc-mode-1 : Mode Register 1
+ - nvidia,emc-mode-2 : Mode Register 2
+ - nvidia,emc-mode-4 : Mode Register 4
+ - nvidia,emc-mode-reset : Mode Register 0
+ - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
+ - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
+ - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
+ - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
+ - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
+- nvidia,emc-configuration : EMC timing characterization data. These are the
+registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
+be specified, according to the board documentation:
+
+ EMC_RC
+ EMC_RFC
+ EMC_RFC_SLR
+ EMC_RAS
+ EMC_RP
+ EMC_R2W
+ EMC_W2R
+ EMC_R2P
+ EMC_W2P
+ EMC_RD_RCD
+ EMC_WR_RCD
+ EMC_RRD
+ EMC_REXT
+ EMC_WEXT
+ EMC_WDV
+ EMC_WDV_MASK
+ EMC_QUSE
+ EMC_QUSE_WIDTH
+ EMC_IBDLY
+ EMC_EINPUT
+ EMC_EINPUT_DURATION
+ EMC_PUTERM_EXTRA
+ EMC_PUTERM_WIDTH
+ EMC_PUTERM_ADJ
+ EMC_CDB_CNTL_1
+ EMC_CDB_CNTL_2
+ EMC_CDB_CNTL_3
+ EMC_QRST
+ EMC_QSAFE
+ EMC_RDV
+ EMC_RDV_MASK
+ EMC_REFRESH
+ EMC_BURST_REFRESH_NUM
+ EMC_PRE_REFRESH_REQ_CNT
+ EMC_PDEX2WR
+ EMC_PDEX2RD
+ EMC_PCHG2PDEN
+ EMC_ACT2PDEN
+ EMC_AR2PDEN
+ EMC_RW2PDEN
+ EMC_TXSR
+ EMC_TXSRDLL
+ EMC_TCKE
+ EMC_TCKESR
+ EMC_TPD
+ EMC_TFAW
+ EMC_TRPAB
+ EMC_TCLKSTABLE
+ EMC_TCLKSTOP
+ EMC_TREFBW
+ EMC_FBIO_CFG6
+ EMC_ODT_WRITE
+ EMC_ODT_READ
+ EMC_FBIO_CFG5
+ EMC_CFG_DIG_DLL
+ EMC_CFG_DIG_DLL_PERIOD
+ EMC_DLL_XFORM_DQS0
+ EMC_DLL_XFORM_DQS1
+ EMC_DLL_XFORM_DQS2
+ EMC_DLL_XFORM_DQS3
+ EMC_DLL_XFORM_DQS4
+ EMC_DLL_XFORM_DQS5
+ EMC_DLL_XFORM_DQS6
+ EMC_DLL_XFORM_DQS7
+ EMC_DLL_XFORM_DQS8
+ EMC_DLL_XFORM_DQS9
+ EMC_DLL_XFORM_DQS10
+ EMC_DLL_XFORM_DQS11
+ EMC_DLL_XFORM_DQS12
+ EMC_DLL_XFORM_DQS13
+ EMC_DLL_XFORM_DQS14
+ EMC_DLL_XFORM_DQS15
+ EMC_DLL_XFORM_QUSE0
+ EMC_DLL_XFORM_QUSE1
+ EMC_DLL_XFORM_QUSE2
+ EMC_DLL_XFORM_QUSE3
+ EMC_DLL_XFORM_QUSE4
+ EMC_DLL_XFORM_QUSE5
+ EMC_DLL_XFORM_QUSE6
+ EMC_DLL_XFORM_QUSE7
+ EMC_DLL_XFORM_ADDR0
+ EMC_DLL_XFORM_ADDR1
+ EMC_DLL_XFORM_ADDR2
+ EMC_DLL_XFORM_ADDR3
+ EMC_DLL_XFORM_ADDR4
+ EMC_DLL_XFORM_ADDR5
+ EMC_DLL_XFORM_QUSE8
+ EMC_DLL_XFORM_QUSE9
+ EMC_DLL_XFORM_QUSE10
+ EMC_DLL_XFORM_QUSE11
+ EMC_DLL_XFORM_QUSE12
+ EMC_DLL_XFORM_QUSE13
+ EMC_DLL_XFORM_QUSE14
+ EMC_DLL_XFORM_QUSE15
+ EMC_DLI_TRIM_TXDQS0
+ EMC_DLI_TRIM_TXDQS1
+ EMC_DLI_TRIM_TXDQS2
+ EMC_DLI_TRIM_TXDQS3
+ EMC_DLI_TRIM_TXDQS4
+ EMC_DLI_TRIM_TXDQS5
+ EMC_DLI_TRIM_TXDQS6
+ EMC_DLI_TRIM_TXDQS7
+ EMC_DLI_TRIM_TXDQS8
+ EMC_DLI_TRIM_TXDQS9
+ EMC_DLI_TRIM_TXDQS10
+ EMC_DLI_TRIM_TXDQS11
+ EMC_DLI_TRIM_TXDQS12
+ EMC_DLI_TRIM_TXDQS13
+ EMC_DLI_TRIM_TXDQS14
+ EMC_DLI_TRIM_TXDQS15
+ EMC_DLL_XFORM_DQ0
+ EMC_DLL_XFORM_DQ1
+ EMC_DLL_XFORM_DQ2
+ EMC_DLL_XFORM_DQ3
+ EMC_DLL_XFORM_DQ4
+ EMC_DLL_XFORM_DQ5
+ EMC_DLL_XFORM_DQ6
+ EMC_DLL_XFORM_DQ7
+ EMC_XM2CMDPADCTRL
+ EMC_XM2CMDPADCTRL4
+ EMC_XM2CMDPADCTRL5
+ EMC_XM2DQPADCTRL2
+ EMC_XM2DQPADCTRL3
+ EMC_XM2CLKPADCTRL
+ EMC_XM2CLKPADCTRL2
+ EMC_XM2COMPPADCTRL
+ EMC_XM2VTTGENPADCTRL
+ EMC_XM2VTTGENPADCTRL2
+ EMC_XM2VTTGENPADCTRL3
+ EMC_XM2DQSPADCTRL3
+ EMC_XM2DQSPADCTRL4
+ EMC_XM2DQSPADCTRL5
+ EMC_XM2DQSPADCTRL6
+ EMC_DSR_VTTGEN_DRV
+ EMC_TXDSRVTTGEN
+ EMC_FBIO_SPARE
+ EMC_ZCAL_WAIT_CNT
+ EMC_MRS_WAIT_CNT2
+ EMC_CTT
+ EMC_CTT_DURATION
+ EMC_CFG_PIPE
+ EMC_DYN_SELF_REF_CONTROL
+ EMC_QPOP
+
+Example SoC include file:
+
+/ {
+ emc@7001b000 {
+ compatible = "nvidia,tegra124-emc";
+ reg = <0x0 0x7001b000 0x0 0x1000>;
+
+ nvidia,memory-controller = <&mc>;
+ };
+};
+
+Example board file:
+
+/ {
+ emc@7001b000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emc-zcal-cnt-long = <0x00000042>;
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-ctt-term-ctrl = <0x00000802>;
+ nvidia,emc-cfg = <0x73240000>;
+ nvidia,emc-cfg-2 = <0x000008c5>;
+ nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+ nvidia,emc-bgbias-ctl0 = <0x00000008>;
+ nvidia,emc-auto-cal-config = <0xa1430000>;
+ nvidia,emc-auto-cal-config2 = <0x00000000>;
+ nvidia,emc-auto-cal-config3 = <0x00000000>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-4 = <0x00000000>;
+
+ nvidia,emc-configuration = <
+ 0x00000000 /* EMC_RC */
+ 0x00000003 /* EMC_RFC */
+ 0x00000000 /* EMC_RFC_SLR */
+ 0x00000000 /* EMC_RAS */
+ 0x00000000 /* EMC_RP */
+ 0x00000004 /* EMC_R2W */
+ 0x0000000a /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x0000000b /* EMC_W2P */
+ 0x00000000 /* EMC_RD_RCD */
+ 0x00000000 /* EMC_WR_RCD */
+ 0x00000003 /* EMC_RRD */
+ 0x00000003 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000006 /* EMC_WDV */
+ 0x00000006 /* EMC_WDV_MASK */
+ 0x00000006 /* EMC_QUSE */
+ 0x00000002 /* EMC_QUSE_WIDTH */
+ 0x00000000 /* EMC_IBDLY */
+ 0x00000005 /* EMC_EINPUT */
+ 0x00000005 /* EMC_EINPUT_DURATION */
+ 0x00010000 /* EMC_PUTERM_EXTRA */
+ 0x00000003 /* EMC_PUTERM_WIDTH */
+ 0x00000000 /* EMC_PUTERM_ADJ */
+ 0x00000000 /* EMC_CDB_CNTL_1 */
+ 0x00000000 /* EMC_CDB_CNTL_2 */
+ 0x00000000 /* EMC_CDB_CNTL_3 */
+ 0x00000004 /* EMC_QRST */
+ 0x0000000c /* EMC_QSAFE */
+ 0x0000000d /* EMC_RDV */
+ 0x0000000f /* EMC_RDV_MASK */
+ 0x00000060 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x00000002 /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x00000007 /* EMC_AR2PDEN */
+ 0x0000000f /* EMC_RW2PDEN */
+ 0x00000005 /* EMC_TXSR */
+ 0x00000005 /* EMC_TXSRDLL */
+ 0x00000004 /* EMC_TCKE */
+ 0x00000005 /* EMC_TCKESR */
+ 0x00000004 /* EMC_TPD */
+ 0x00000000 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000005 /* EMC_TCLKSTABLE */
+ 0x00000005 /* EMC_TCLKSTOP */
+ 0x00000064 /* EMC_TREFBW */
+ 0x00000000 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x106aa298 /* EMC_FBIO_CFG5 */
+ 0x002c00a0 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00064000 /* EMC_DLL_XFORM_DQS0 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS1 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS2 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS3 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS4 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS5 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS6 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS7 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS8 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS9 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS10 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS11 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS12 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS13 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS14 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS15 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+ 0x10000280 /* EMC_XM2CMDPADCTRL */
+ 0x00000000 /* EMC_XM2CMDPADCTRL4 */
+ 0x00111111 /* EMC_XM2CMDPADCTRL5 */
+ 0x00000000 /* EMC_XM2DQPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL3 */
+ 0x77ffc081 /* EMC_XM2CLKPADCTRL */
+ 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+ 0x81f1f108 /* EMC_XM2COMPPADCTRL */
+ 0x07070004 /* EMC_XM2VTTGENPADCTRL */
+ 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+ 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL3 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL4 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL5 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL6 */
+ 0x0000003f /* EMC_DSR_VTTGEN_DRV */
+ 0x00000007 /* EMC_TXDSRVTTGEN */
+ 0x00000000 /* EMC_FBIO_SPARE */
+ 0x00000042 /* EMC_ZCAL_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT2 */
+ 0x00000000 /* EMC_CTT */
+ 0x00000003 /* EMC_CTT_DURATION */
+ 0x0000f2f3 /* EMC_CFG_PIPE */
+ 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0x0000000a /* EMC_QPOP */
+ >;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
deleted file mode 100644
index ba0bc3f12419..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
+++ /dev/null
@@ -1,374 +0,0 @@
-NVIDIA Tegra124 SoC EMC (external memory controller)
-====================================================
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-emc".
-- reg : physical base address and length of the controller's registers.
-- nvidia,memory-controller : phandle of the MC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type
-(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
-being its RAM_CODE.
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
-used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
-their unit address.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate in Hz.
-- The following properties contain EMC timing characterization values
-(specified in the board documentation) :
- - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
- - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
- - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
- - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
- - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
- - nvidia,emc-cfg : EMC_CFG
- - nvidia,emc-cfg-2 : EMC_CFG_2
- - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
- - nvidia,emc-mode-1 : Mode Register 1
- - nvidia,emc-mode-2 : Mode Register 2
- - nvidia,emc-mode-4 : Mode Register 4
- - nvidia,emc-mode-reset : Mode Register 0
- - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
- - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
- - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
- - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
- - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
-- nvidia,emc-configuration : EMC timing characterization data. These are the
-registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
-be specified, according to the board documentation:
-
- EMC_RC
- EMC_RFC
- EMC_RFC_SLR
- EMC_RAS
- EMC_RP
- EMC_R2W
- EMC_W2R
- EMC_R2P
- EMC_W2P
- EMC_RD_RCD
- EMC_WR_RCD
- EMC_RRD
- EMC_REXT
- EMC_WEXT
- EMC_WDV
- EMC_WDV_MASK
- EMC_QUSE
- EMC_QUSE_WIDTH
- EMC_IBDLY
- EMC_EINPUT
- EMC_EINPUT_DURATION
- EMC_PUTERM_EXTRA
- EMC_PUTERM_WIDTH
- EMC_PUTERM_ADJ
- EMC_CDB_CNTL_1
- EMC_CDB_CNTL_2
- EMC_CDB_CNTL_3
- EMC_QRST
- EMC_QSAFE
- EMC_RDV
- EMC_RDV_MASK
- EMC_REFRESH
- EMC_BURST_REFRESH_NUM
- EMC_PRE_REFRESH_REQ_CNT
- EMC_PDEX2WR
- EMC_PDEX2RD
- EMC_PCHG2PDEN
- EMC_ACT2PDEN
- EMC_AR2PDEN
- EMC_RW2PDEN
- EMC_TXSR
- EMC_TXSRDLL
- EMC_TCKE
- EMC_TCKESR
- EMC_TPD
- EMC_TFAW
- EMC_TRPAB
- EMC_TCLKSTABLE
- EMC_TCLKSTOP
- EMC_TREFBW
- EMC_FBIO_CFG6
- EMC_ODT_WRITE
- EMC_ODT_READ
- EMC_FBIO_CFG5
- EMC_CFG_DIG_DLL
- EMC_CFG_DIG_DLL_PERIOD
- EMC_DLL_XFORM_DQS0
- EMC_DLL_XFORM_DQS1
- EMC_DLL_XFORM_DQS2
- EMC_DLL_XFORM_DQS3
- EMC_DLL_XFORM_DQS4
- EMC_DLL_XFORM_DQS5
- EMC_DLL_XFORM_DQS6
- EMC_DLL_XFORM_DQS7
- EMC_DLL_XFORM_DQS8
- EMC_DLL_XFORM_DQS9
- EMC_DLL_XFORM_DQS10
- EMC_DLL_XFORM_DQS11
- EMC_DLL_XFORM_DQS12
- EMC_DLL_XFORM_DQS13
- EMC_DLL_XFORM_DQS14
- EMC_DLL_XFORM_DQS15
- EMC_DLL_XFORM_QUSE0
- EMC_DLL_XFORM_QUSE1
- EMC_DLL_XFORM_QUSE2
- EMC_DLL_XFORM_QUSE3
- EMC_DLL_XFORM_QUSE4
- EMC_DLL_XFORM_QUSE5
- EMC_DLL_XFORM_QUSE6
- EMC_DLL_XFORM_QUSE7
- EMC_DLL_XFORM_ADDR0
- EMC_DLL_XFORM_ADDR1
- EMC_DLL_XFORM_ADDR2
- EMC_DLL_XFORM_ADDR3
- EMC_DLL_XFORM_ADDR4
- EMC_DLL_XFORM_ADDR5
- EMC_DLL_XFORM_QUSE8
- EMC_DLL_XFORM_QUSE9
- EMC_DLL_XFORM_QUSE10
- EMC_DLL_XFORM_QUSE11
- EMC_DLL_XFORM_QUSE12
- EMC_DLL_XFORM_QUSE13
- EMC_DLL_XFORM_QUSE14
- EMC_DLL_XFORM_QUSE15
- EMC_DLI_TRIM_TXDQS0
- EMC_DLI_TRIM_TXDQS1
- EMC_DLI_TRIM_TXDQS2
- EMC_DLI_TRIM_TXDQS3
- EMC_DLI_TRIM_TXDQS4
- EMC_DLI_TRIM_TXDQS5
- EMC_DLI_TRIM_TXDQS6
- EMC_DLI_TRIM_TXDQS7
- EMC_DLI_TRIM_TXDQS8
- EMC_DLI_TRIM_TXDQS9
- EMC_DLI_TRIM_TXDQS10
- EMC_DLI_TRIM_TXDQS11
- EMC_DLI_TRIM_TXDQS12
- EMC_DLI_TRIM_TXDQS13
- EMC_DLI_TRIM_TXDQS14
- EMC_DLI_TRIM_TXDQS15
- EMC_DLL_XFORM_DQ0
- EMC_DLL_XFORM_DQ1
- EMC_DLL_XFORM_DQ2
- EMC_DLL_XFORM_DQ3
- EMC_DLL_XFORM_DQ4
- EMC_DLL_XFORM_DQ5
- EMC_DLL_XFORM_DQ6
- EMC_DLL_XFORM_DQ7
- EMC_XM2CMDPADCTRL
- EMC_XM2CMDPADCTRL4
- EMC_XM2CMDPADCTRL5
- EMC_XM2DQPADCTRL2
- EMC_XM2DQPADCTRL3
- EMC_XM2CLKPADCTRL
- EMC_XM2CLKPADCTRL2
- EMC_XM2COMPPADCTRL
- EMC_XM2VTTGENPADCTRL
- EMC_XM2VTTGENPADCTRL2
- EMC_XM2VTTGENPADCTRL3
- EMC_XM2DQSPADCTRL3
- EMC_XM2DQSPADCTRL4
- EMC_XM2DQSPADCTRL5
- EMC_XM2DQSPADCTRL6
- EMC_DSR_VTTGEN_DRV
- EMC_TXDSRVTTGEN
- EMC_FBIO_SPARE
- EMC_ZCAL_WAIT_CNT
- EMC_MRS_WAIT_CNT2
- EMC_CTT
- EMC_CTT_DURATION
- EMC_CFG_PIPE
- EMC_DYN_SELF_REF_CONTROL
- EMC_QPOP
-
-Example SoC include file:
-
-/ {
- emc@7001b000 {
- compatible = "nvidia,tegra124-emc";
- reg = <0x0 0x7001b000 0x0 0x1000>;
-
- nvidia,memory-controller = <&mc>;
- };
-};
-
-Example board file:
-
-/ {
- emc@7001b000 {
- emc-timings-3 {
- nvidia,ram-code = <3>;
-
- timing-12750000 {
- clock-frequency = <12750000>;
-
- nvidia,emc-zcal-cnt-long = <0x00000042>;
- nvidia,emc-auto-cal-interval = <0x001fffff>;
- nvidia,emc-ctt-term-ctrl = <0x00000802>;
- nvidia,emc-cfg = <0x73240000>;
- nvidia,emc-cfg-2 = <0x000008c5>;
- nvidia,emc-sel-dpd-ctrl = <0x00040128>;
- nvidia,emc-bgbias-ctl0 = <0x00000008>;
- nvidia,emc-auto-cal-config = <0xa1430000>;
- nvidia,emc-auto-cal-config2 = <0x00000000>;
- nvidia,emc-auto-cal-config3 = <0x00000000>;
- nvidia,emc-mode-reset = <0x80001221>;
- nvidia,emc-mode-1 = <0x80100003>;
- nvidia,emc-mode-2 = <0x80200008>;
- nvidia,emc-mode-4 = <0x00000000>;
-
- nvidia,emc-configuration = <
- 0x00000000 /* EMC_RC */
- 0x00000003 /* EMC_RFC */
- 0x00000000 /* EMC_RFC_SLR */
- 0x00000000 /* EMC_RAS */
- 0x00000000 /* EMC_RP */
- 0x00000004 /* EMC_R2W */
- 0x0000000a /* EMC_W2R */
- 0x00000003 /* EMC_R2P */
- 0x0000000b /* EMC_W2P */
- 0x00000000 /* EMC_RD_RCD */
- 0x00000000 /* EMC_WR_RCD */
- 0x00000003 /* EMC_RRD */
- 0x00000003 /* EMC_REXT */
- 0x00000000 /* EMC_WEXT */
- 0x00000006 /* EMC_WDV */
- 0x00000006 /* EMC_WDV_MASK */
- 0x00000006 /* EMC_QUSE */
- 0x00000002 /* EMC_QUSE_WIDTH */
- 0x00000000 /* EMC_IBDLY */
- 0x00000005 /* EMC_EINPUT */
- 0x00000005 /* EMC_EINPUT_DURATION */
- 0x00010000 /* EMC_PUTERM_EXTRA */
- 0x00000003 /* EMC_PUTERM_WIDTH */
- 0x00000000 /* EMC_PUTERM_ADJ */
- 0x00000000 /* EMC_CDB_CNTL_1 */
- 0x00000000 /* EMC_CDB_CNTL_2 */
- 0x00000000 /* EMC_CDB_CNTL_3 */
- 0x00000004 /* EMC_QRST */
- 0x0000000c /* EMC_QSAFE */
- 0x0000000d /* EMC_RDV */
- 0x0000000f /* EMC_RDV_MASK */
- 0x00000060 /* EMC_REFRESH */
- 0x00000000 /* EMC_BURST_REFRESH_NUM */
- 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
- 0x00000002 /* EMC_PDEX2WR */
- 0x00000002 /* EMC_PDEX2RD */
- 0x00000001 /* EMC_PCHG2PDEN */
- 0x00000000 /* EMC_ACT2PDEN */
- 0x00000007 /* EMC_AR2PDEN */
- 0x0000000f /* EMC_RW2PDEN */
- 0x00000005 /* EMC_TXSR */
- 0x00000005 /* EMC_TXSRDLL */
- 0x00000004 /* EMC_TCKE */
- 0x00000005 /* EMC_TCKESR */
- 0x00000004 /* EMC_TPD */
- 0x00000000 /* EMC_TFAW */
- 0x00000000 /* EMC_TRPAB */
- 0x00000005 /* EMC_TCLKSTABLE */
- 0x00000005 /* EMC_TCLKSTOP */
- 0x00000064 /* EMC_TREFBW */
- 0x00000000 /* EMC_FBIO_CFG6 */
- 0x00000000 /* EMC_ODT_WRITE */
- 0x00000000 /* EMC_ODT_READ */
- 0x106aa298 /* EMC_FBIO_CFG5 */
- 0x002c00a0 /* EMC_CFG_DIG_DLL */
- 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
- 0x00064000 /* EMC_DLL_XFORM_DQS0 */
- 0x00064000 /* EMC_DLL_XFORM_DQS1 */
- 0x00064000 /* EMC_DLL_XFORM_DQS2 */
- 0x00064000 /* EMC_DLL_XFORM_DQS3 */
- 0x00064000 /* EMC_DLL_XFORM_DQS4 */
- 0x00064000 /* EMC_DLL_XFORM_DQS5 */
- 0x00064000 /* EMC_DLL_XFORM_DQS6 */
- 0x00064000 /* EMC_DLL_XFORM_DQS7 */
- 0x00064000 /* EMC_DLL_XFORM_DQS8 */
- 0x00064000 /* EMC_DLL_XFORM_DQS9 */
- 0x00064000 /* EMC_DLL_XFORM_DQS10 */
- 0x00064000 /* EMC_DLL_XFORM_DQS11 */
- 0x00064000 /* EMC_DLL_XFORM_DQS12 */
- 0x00064000 /* EMC_DLL_XFORM_DQS13 */
- 0x00064000 /* EMC_DLL_XFORM_DQS14 */
- 0x00064000 /* EMC_DLL_XFORM_DQS15 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
- 0x10000280 /* EMC_XM2CMDPADCTRL */
- 0x00000000 /* EMC_XM2CMDPADCTRL4 */
- 0x00111111 /* EMC_XM2CMDPADCTRL5 */
- 0x00000000 /* EMC_XM2DQPADCTRL2 */
- 0x00000000 /* EMC_XM2DQPADCTRL3 */
- 0x77ffc081 /* EMC_XM2CLKPADCTRL */
- 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
- 0x81f1f108 /* EMC_XM2COMPPADCTRL */
- 0x07070004 /* EMC_XM2VTTGENPADCTRL */
- 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
- 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
- 0x51451400 /* EMC_XM2DQSPADCTRL3 */
- 0x00514514 /* EMC_XM2DQSPADCTRL4 */
- 0x00514514 /* EMC_XM2DQSPADCTRL5 */
- 0x51451400 /* EMC_XM2DQSPADCTRL6 */
- 0x0000003f /* EMC_DSR_VTTGEN_DRV */
- 0x00000007 /* EMC_TXDSRVTTGEN */
- 0x00000000 /* EMC_FBIO_SPARE */
- 0x00000042 /* EMC_ZCAL_WAIT_CNT */
- 0x000e000e /* EMC_MRS_WAIT_CNT2 */
- 0x00000000 /* EMC_CTT */
- 0x00000003 /* EMC_CTT_DURATION */
- 0x0000f2f3 /* EMC_CFG_PIPE */
- 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
- 0x0000000a /* EMC_QPOP */
- >;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra-soctherm.txt
new file mode 100644
index 000000000000..edebfa0a985e
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra-soctherm.txt
@@ -0,0 +1,67 @@
+Tegra124 SOCTHERM thermal management system
+
+The SOCTHERM IP block contains thermal sensors, support for polled
+or interrupt-based thermal monitoring, CPU and GPU throttling based
+on temperature trip points, and handling external overcurrent
+notifications. It is also used to manage emergency shutdown in an
+overheating situation.
+
+Required properties :
+- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
+ For Tegra132, must contain "nvidia,tegra132-soctherm".
+ For Tegra210, must contain "nvidia,tegra210-soctherm".
+- reg : Should contain 1 entry:
+ - SOCTHERM register set
+- interrupts : Defines the interrupt used by SOCTHERM
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - tsensor
+ - soctherm
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - soctherm
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
+ of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
+ list of valid values when referring to thermal sensors.
+
+Note:
+- the "critical" type trip points will be set to SOC_THERM hardware as the
+shut down temperature. Once the temperature of this thermal zone is higher
+than it, the system will be shutdown or reset by hardware.
+
+Example :
+
+ soctherm@700e2000 {
+ compatible = "nvidia,tegra124-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+ <&tegra_car TEGRA124_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+
+ #thermal-sensor-cells = <1>;
+ };
+
+Example: referring to thermal sensors :
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu_shutdown_trip: shutdown-trip {
+ temperature = <102500>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
deleted file mode 100644
index edebfa0a985e..000000000000
--- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Tegra124 SOCTHERM thermal management system
-
-The SOCTHERM IP block contains thermal sensors, support for polled
-or interrupt-based thermal monitoring, CPU and GPU throttling based
-on temperature trip points, and handling external overcurrent
-notifications. It is also used to manage emergency shutdown in an
-overheating situation.
-
-Required properties :
-- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
- For Tegra132, must contain "nvidia,tegra132-soctherm".
- For Tegra210, must contain "nvidia,tegra210-soctherm".
-- reg : Should contain 1 entry:
- - SOCTHERM register set
-- interrupts : Defines the interrupt used by SOCTHERM
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- - tsensor
- - soctherm
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - soctherm
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
- of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
- list of valid values when referring to thermal sensors.
-
-Note:
-- the "critical" type trip points will be set to SOC_THERM hardware as the
-shut down temperature. Once the temperature of this thermal zone is higher
-than it, the system will be shutdown or reset by hardware.
-
-Example :
-
- soctherm@700e2000 {
- compatible = "nvidia,tegra124-soctherm";
- reg = <0x0 0x700e2000 0x0 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
- <&tegra_car TEGRA124_CLK_SOC_THERM>;
- clock-names = "tsensor", "soctherm";
- resets = <&tegra_car 78>;
- reset-names = "soctherm";
-
- #thermal-sensor-cells = <1>;
- };
-
-Example: referring to thermal sensors :
-
- thermal-zones {
- cpu {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors =
- <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
-
- trips {
- cpu_shutdown_trip: shutdown-trip {
- temperature = <102500>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
- };
--
2.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
