Add power-domain binding documentation for the NVIDIA PMC driver in
order to support generic power-domains.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 53aa5496c5cf..a74b37b07e5c 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -1,5 +1,7 @@
NVIDIA Tegra Power Management Controller (PMC)
+== Power Management Controller Node ==
+
The PMC block interacts with an external Power Management Unit. The PMC
mostly controls the entry and exit of the system from different sleep
modes. It provides power-gating controllers for SoC and CPU power-islands.
@@ -70,6 +72,11 @@ Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'
Defaults to 0. Valid values are described in section 12.5.2
"Pinmux Support" of the Tegra4 Technical Reference Manual.
+Optional nodes:
+- powergates : This node contains a hierarchy of power domain nodes, which
+ should match the powergates on the Tegra SoC. See "Powergate
+ Nodes" below.
+
Example:
/ SoC dts including file
@@ -115,3 +122,76 @@ pmc@7000f400 {
};
...
};
+
+
+== Powergate Nodes ==
+
+Each of the powergate nodes represents a power-domain on the Tegra SoC
+that can be power-gated by the Tegra PMC. The name of the powergate node
+should be one of the below. Note that not every powergate is applicable
+to all Tegra devices and the following list shows which powergates are
+applicable to which devices. Please refer to the Tegra TRM for more
+details on the various powergates.
+
+ Name Description Devices Applicable
+ 3d 3D Graphics Tegra20/114/124/210
+ 3d0 3D Graphics 0 Tegra30
+ 3d1 3D Graphics 1 Tegra30
+ aud Audio Tegra210
+ dfd Debug Tegra210
+ dis Display A Tegra114/124/210
+ disb Display B Tegra114/124/210
+ heg 2D Graphics Tegra30/114/124/210
+ iram Internal RAM Tegra124/210
+ mpe MPEG Encode All
+ nvdec NVIDIA Video Decode Engine Tegra210
+ nvjpg NVIDIA JPEG Engine Tegra210
+ pcie PCIE Tegra20/30/124/210
+ sata SATA Tegra30/124/210
+ sor Display interfaces Tegra124/210
+ ve2 Video Encode Engine 2 Tegra210
+ venc Video Encode Engine All
+ vdec Video Decode Engine Tegra20/30/114/124
+ vic Video Imaging Compositor Tegra124/210
+ xusba USB Partition A Tegra114/124/210
+ xusbb USB Partition B Tegra114/124/210
+ xusbc USB Partition C Tegra114/124/210
+
+Required properties:
+ - clocks: Must contain an entry for each clock required by the PMC for
+ controlling a power-gate. See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each reset required by the PMC for
+ controlling a power-gate. See ../reset/reset.txt for details.
+ - #power-domain-cells: Must be 0.
+
+Example:
+
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ powergates {
+ pd_audio: aud {
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ resets = <&tegra_car 198>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+
+== Powergate Clients ==
+
+Hardware blocks belonging to a power domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding powergate node.
+
+Example:
+
+ adma: adma@702e2000 {
+ ...
+ power-domains = <&pd_audio>;
+ ...
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
