In current of-thermal, the .set_trip_temp only support to
set trip_temp for SW. But some sensors support to set
trip_temp on hardware, so that can trigger interrupt,
shutdown or any other events.
This patch adds .set_trip_temp() callback in
thermal_zone_of_device_ops{}, so that the sensor device can
use it to set trip_temp on hardware.
Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
drivers/thermal/of-thermal.c | 8 ++++++++
include/linux/thermal.h | 1 +
2 files changed, 9 insertions(+)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 5a515f8677ec..57828841b6e6 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -331,6 +331,14 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
if (trip >= data->ntrips || trip < 0)
return -EDOM;
+ if (data->ops->set_trip_temp) {
+ int ret;
+
+ ret = data->ops->set_trip_temp(data->sensor_data, trip, temp);
+ if (ret)
+ return ret;
+ }
+
/* thermal framework should take care of data->mask & (1 << trip) */
data->trips[trip].temperature = temp;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 9c481991fdc7..fcaab873b94f 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -338,6 +338,7 @@ struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
int (*get_trend)(void *, long *);
int (*set_emul_temp)(void *, int);
+ int (*set_trip_temp)(void *, int, int);
};
/**
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
