From: Thierry Reding <treding@xxxxxxxxxx>
Changes to the pad controller device tree binding have required that
each lane be associated with a separate PHY. Update the PCI host bridge
device tree binding to allow each root port to define the list of PHYs
required to drive the lanes associated with it.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
.../devicetree/bindings/pci/nvidia,tegra20-pcie.txt | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 75321ae23c08..033fe4b5afac 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -60,11 +60,14 @@ Required properties:
- afi
- pcie_x
-Required properties on Tegra124 and later:
+Required properties on Tegra124 and later (deprecated):
- phys: Must contain an entry for each entry in phy-names.
- phy-names: Must include the following entries:
- pcie
+These properties are deprecated in favour of per-lane PHYs define in each of
+the root ports (see below).
+
Power supplies for Tegra20:
- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
@@ -122,6 +125,13 @@ Required properties:
- Root port 0 uses 4 lanes, root port 1 is unused.
- Both root ports use 2 lanes.
+Required properties for Tegra124 and later:
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane. Note that the number
+ of entries does not have to (though usually will) be equal to the specified
+ number of lanes in the nvidia,num-lanes property. Entries are of the form
+ "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
+
Example:
SoC DTSI:
@@ -169,6 +179,9 @@ SoC DTSI:
ranges;
nvidia,num-lanes = <2>;
+
+ phys = <&{/padctl@0,7009f000/pads/pcie/pcie-4}>;
+ phy-names = "pcie-0";
};
pci@2,0 {
@@ -183,6 +196,9 @@ SoC DTSI:
ranges;
nvidia,num-lanes = <2>;
+
+ phys = <&{/padctl@0,7009f000/pads/pcie/pcie-2}>;
+ phy-names = "pcie-0";
};
};
--
2.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
