On 2016年01月26日 10:41, Rob Herring wrote: > On Mon, Jan 25, 2016 at 06:46:36PM +0800, Wei Ni wrote: >> Add hw-trips sub-node for soctherm, which is >> used to describe the hardware trip points for >> each soctherm sensors. > > This seems like something that should be common. There was a hwmon > binding just the other day with temperature set points. I have checked the thermal_hwmon.c, but we can't use it. Because we use of-thermal to register thermal zone, but it doesn't support to register to hwmon. And it only support to show the critical temperature. I think this sub-node is used for Tegra's soctherm specifically. And it's not only for shutdown/reset, it also will be used to describe the hw-throttle function in next serial patches (I'm preparing it, didn't send out yet). BTW, I didn't find the hwmon binding to introduce the hw trips in TOT kernel-next, could you show me it? > >> Signed-off-by: Wei Ni <wni@xxxxxxxxxx> >> --- >> .../devicetree/bindings/thermal/tegra-soctherm.txt | 24 ++++++++++++++++++++++ >> 1 file changed, 24 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt >> index 6b68cd150405..75dc9dbe7e1a 100644 >> --- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt >> +++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt >> @@ -26,6 +26,15 @@ Required properties : >> of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a >> list of valid values when referring to thermal sensors. >> >> +Optional properties: >> +- hw-trip-points : A sub-node which is a container of hardware trip points >> + for each sensors. >> + * sensors: Sub-nodes which are used to describe the HW trip points info, >> + must be named as "cpu", "gpu", "mem", "pll". >> + Properties: >> + - thermtrip-temperature : Shutdown or reset temperature in millicelsius, >> + once the temperature of this sensor is higher than the >> + thermtrip-temperature, the system will be shutdown or reset. > > Append units and temperature is a bit redundant. Something like > thermtrip-mC or thermtrip-milliC Hmm, got it, will change it in next version. > > You could easily have multiple levels of trip points, so perhaps the > name needs to reflect the action (i.e. shutdown). This temperature can trigger shutdown or reset, it depends on the platform design, and the Tegra's SPEC call it as thermtrip, so I use this name. I prefer to use "thermtgrip-mC". > > Rob > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
