Add power-domain binding documentation for the NVIDIA PMC driver in
order to support generic power-domains.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
Please note that I have been debating whether I add this
"nvidia,powergate-clock-disable" property or just leave the clocks
disabled by default. Some downstream kernels leave the clocks enabled
for the audio power-domain because the clocks required for powering up
the power-domain are needed by all modules within the power-domain.
However are the same time there are other power-domains that may need
to be on, but not always clocked and so having the ability to specify if
the clocks should be disabled seems useful. However, I can also remove
this and just have the appropriate devices turn on the clocks as well.
---
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 838e1a69ec0a..8e4641db51a9 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -1,5 +1,7 @@
NVIDIA Tegra Power Management Controller (PMC)
+== Power Management Controller Node ==
+
The PMC block interacts with an external Power Management Unit. The PMC
mostly controls the entry and exit of the system from different sleep
modes. It provides power-gating controllers for SoC and CPU power-islands.
@@ -69,6 +71,10 @@ Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'
Defaults to 0. Valid values are described in section 12.5.2
"Pinmux Support" of the Tegra4 Technical Reference Manual.
+Optional nodes:
+- pm-domains : This node contains a hierarchy of PM domain nodes, which should
+ match the power-domains on the Tegra SoC.
+
Example:
/ SoC dts including file
@@ -114,3 +120,58 @@ pmc@7000f400 {
};
...
};
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a power-domain on the Tegra SoC
+that can be power-gated by the PMC and should be named appropriately.
+
+Required properties:
+ - clocks: Must contain an entry for each clock required by the PMC for
+ controlling a power-gate. See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each reset required by the PMC for
+ controlling a power-gate. See ../reset/reset.txt for details.
+ - nvidia,powergate: Integer cell that contains an identifier for the PMC
+ power-gate that is associated with the power-domain. Please refer to
+ the Tegra TRM for more details.
+ - #power-domain-cells: Must be 0.
+
+Optional properties:
+ - nvidia,powergate-disable-clocks: Boolean property that if present
+ indicates that the clocks listed in the "clocks" property should be
+ disabled after turning on the power-domain. Otherwise the clocks will
+ be kept enabled.
+
+Example:
+
+ pmc: pmc@0,7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ pm-domains {
+ pd_audio: aud {
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ resets = <&tegra_car 198>;
+ nvidia,powergate = <TEGRA_POWERGATE_AUD>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+ adma: adma@702e2000 {
+ ...
+ power-domains = <&pd_audio>;
+ ...
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
