The reset sub-system is supposed to be enabled by two steps:
- ARCH_HAS_RESET_CONTROLLER is select'ed by such sub-architectures
that support reset controllers
- Based on that, RESET_CONTROLLER is configured by "make menuconfig"
or friends. (Note that it is a user-configurable option as it has
a prompt.)
But, this is getting messy in spite of the intention. Some SoC families
(such as Tegra, sunxi, etc.) select both ARCH_HAS_RESET_CONTROLLER and
RESET_CONTROLLER. So, it is no longer configurable (i.e. forcibly
select'ed) in the multi-platforms.
Also, many drivers that use reset APIs are accompanied by
"depends on RESET_CONTROLLER".
Like pinctrl, clk sub-systems, reset is a fundamental feature needed
for SoCs to work correctly.
If a particular SoC supports a reset controller driver, it is very
likely to be necessary for that SoC.
So, this commit drops ARCH_HAS_RESET_CONTROLLER, making RESET_CONTROLLER
a user-unconfigurable option. Going forward, it should be directly
select'ed by relevant SoCs.
This change would also be useful to clean-up "depends on RESET_CONTROLLER"
in other drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
arch/arm/Kconfig | 3 +--
arch/arm/mach-berlin/Kconfig | 2 +-
arch/arm/mach-imx/Kconfig | 2 +-
arch/arm/mach-mmp/Kconfig | 4 ++--
arch/arm/mach-prima2/Kconfig | 2 +-
arch/arm/mach-rockchip/Kconfig | 2 +-
arch/arm/mach-sti/Kconfig | 1 -
arch/arm/mach-sunxi/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 3 +--
arch/mips/Kconfig | 4 +---
drivers/reset/Kconfig | 12 +++++++-----
drivers/reset/sti/Kconfig | 1 -
13 files changed, 16 insertions(+), 22 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1ed110..55af5e8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -972,7 +972,7 @@ config ARCH_EFM32
config ARCH_LPC18XX
bool "NXP LPC18xx/LPC43xx"
depends on ARM_SINGLE_ARMV7M
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARM_AMBA
select CLKSRC_LPC32XX
select PINCTRL
@@ -983,7 +983,6 @@ config ARCH_LPC18XX
config ARCH_STM32
bool "STMicrolectronics STM32"
depends on ARM_SINGLE_ARMV7M
- select ARCH_HAS_RESET_CONTROLLER
select ARMV7M_SYSTICK
select CLKSRC_STM32
select RESET_CONTROLLER
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 742d53a..1c8e301 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,6 +1,6 @@
menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select DW_APB_ICTL
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8ceda28..7773cd7 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -58,7 +58,7 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
def_bool y if SMP
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
config IMX_HAVE_IOMUX_V1
bool
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index fdbfadf..46fdb69 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -90,7 +90,7 @@ config MACH_MMP_DT
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select CPU_MOHAWK
help
Include support for Marvell MMP2 based platforms using
@@ -104,7 +104,7 @@ config MACH_MMP2_DT
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select CPU_PJ4
help
Include support for Marvell MMP2 based platforms using
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 9ab8932..5d03202 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,6 +1,6 @@
menuconfig ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ae4eb7c..6990c3a 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -2,7 +2,7 @@ config ARCH_ROCKCHIP
bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
select PINCTRL
select PINCTRL_ROCKCHIP
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 125865d..d0606e2 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -6,7 +6,6 @@ menuconfig ARCH_STI
select PINCTRL
select PINCTRL_ST
select MFD_SYSCON
- select ARCH_HAS_RESET_CONTROLLER
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 4efe2d4..60b58ca 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,7 +1,6 @@
menuconfig ARCH_SUNXI
bool "Allwinner SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
- select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select PINCTRL
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 0fa4c5f..269efaa 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -9,7 +9,6 @@ menuconfig ARCH_TEGRA
select HAVE_ARM_TWD if SMP
select PINCTRL
select PM_OPP
- select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
select USB_ULPI if USB_PHY
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index bb066e0..c455540 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -53,7 +53,7 @@ config ARCH_QCOM
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select PINCTRL
select PINCTRL_ROCKCHIP
@@ -68,7 +68,6 @@ config ARCH_SEATTLE
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
- select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0..da655a0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -119,7 +119,7 @@ config ATH25
config ATH79
bool "Atheros AR71XX/AR724X/AR913X based boards"
- select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select BOOT_RAW
select CEVT_R4K
@@ -329,7 +329,6 @@ config LANTIQ
select USE_OF
select PINCTRL
select PINCTRL_LANTIQ
- select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
config LASAT
@@ -555,7 +554,6 @@ config RALINK
select SYS_HAS_EARLY_PRINTK
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
- select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
config SGI_IP22
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0615f50..4ca3cc8 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -1,9 +1,5 @@
-config ARCH_HAS_RESET_CONTROLLER
+config RESET_CONTROLLER
bool
-
-menuconfig RESET_CONTROLLER
- bool "Reset Controller Support"
- default y if ARCH_HAS_RESET_CONTROLLER
help
Generic Reset Controller support.
@@ -12,4 +8,10 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+
+menu "Reset Controllers"
+ depends on RESET_CONTROLLER
+
source "drivers/reset/sti/Kconfig"
+
+endmenu
diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig
index f8c15a3..6131785 100644
--- a/drivers/reset/sti/Kconfig
+++ b/drivers/reset/sti/Kconfig
@@ -2,7 +2,6 @@ if ARCH_STI
config STI_RESET_SYSCFG
bool
- select RESET_CONTROLLER
config STIH415_RESET
bool
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
