On 10/23/2015 05:30 PM, Tom Warren wrote:
This patch adds the device tree binding doc for the Tegra
SPI/QSPI controllers on Tegra114 and Tegra210.
diff --git a/doc/device-tree-bindings/spi/spi-tegra.txt b/doc/device-tree-bindings/spi/spi-tegra.txt
Since this is a patch to the Linux kernel, it should use the path and
file names from the Linux kernel, so that should be:
Documentation/devicetree/bindings/spi/nvidia,tegra210-qspi.txt
(or perhaps an earlier SoC number if this HW block first appeared before
Tegra210)
+NVIDIA Tegra SPI/QSPI controller.
There's already a binding document for the regular SPI controller. The
plain SPI entries should be removed from this file, leaving it covering
the QSPI controller only.
Can you confirm that there physically is a separate QSPI controller in
HW and that it has different registers to the regular SPI controller?
Or, is QSPI simply a new mode of operation for the existing HW?
+Required properties:
+- compatible : should be one of the following:
+ "nvidia,tegra114-spi" (for Tegra114)
+ "nvidia,tegra210-qspi" (for Tegra210)
+- reg: Should contain SPI registers location and length.
+- interrupts: Should contain SPI interrupts.
Are there multiple interrupts or just one? I imagine just one, in which
case just "interrupt" at the end of that description.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
