Re: [PATCH V2 2/2] dmaengine: tegra-adma: Add support for Tegra210 ADMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/10/15 12:27, Vinod Koul wrote:
> On Mon, Oct 05, 2015 at 01:10:07PM +0100, Jon Hunter wrote:
> 
>> +static enum dma_status tegra_adma_tx_status(struct dma_chan *dc,
>> +					    dma_cookie_t cookie,
>> +					    struct dma_tx_state *txstate)
>> +{
>> +	struct tegra_adma_chan *tdc = to_tegra_adma_chan(dc);
>> +	struct tegra_adma_desc *desc;
>> +	struct virt_dma_desc *vd;
>> +	enum dma_status ret;
>> +	unsigned long flags;
>> +	unsigned int residual;
>> +
>> +	spin_lock_irqsave(&tdc->lock, flags);
>> +
>> +	ret = dma_cookie_status(dc, cookie, txstate);
>> +	if (ret == DMA_COMPLETE) {
>> +		spin_unlock_irqrestore(&tdc->lock, flags);
>> +		return ret;
>> +	}
> 
> txstate can be NULL, upon which below code doesn't help in getting executed
> so bailing here or above case is fine

Ok, will fix.

>> +static struct dma_async_tx_descriptor *tegra_adma_prep_dma_cyclic(
>> +	struct dma_chan *dc, dma_addr_t buf_addr, size_t buf_len,
>> +	size_t period_len, enum dma_transfer_direction direction,
>> +	unsigned long flags)
>> +{
>> +	struct tegra_adma_chan *tdc = to_tegra_adma_chan(dc);
>> +	struct tegra_adma_desc *desc = NULL;
>> +
>> +	if (!tdc->config_valid) {
>> +		dev_err(tdc2dev(tdc), "ADMA slave configuration not set\n");
>> +		return NULL;
>> +	}
>> +
>> +	if (!buf_len || !period_len || period_len > ADMA_CH_TC_COUNT_MASK) {
>> +		dev_err(tdc2dev(tdc), "invalid buffer/period len\n");
>> +		return NULL;
>> +	}
>> +
>> +	if (buf_len % period_len) {
>> +		dev_err(tdc2dev(tdc), "buf_len not a multiple of period_len\n");
>> +		return NULL;
>> +	}
>> +
>> +	if (!IS_ALIGNED(buf_addr, 4)) {
>> +		dev_err(tdc2dev(tdc), "invalid buffer alignment\n");
>> +		return NULL;
>> +	}
>> +
>> +	desc = kzalloc(sizeof(*desc), GFP_ATOMIC);
> 
> we recommend GFP_NOWAIT for the subsystem

Ok, makes sense. I should probably fix up the tegra APB dma driver too.

>> +static int tegra_adma_remove(struct platform_device *pdev)
>> +{
>> +	struct tegra_adma *tdma = platform_get_drvdata(pdev);
>> +	struct tegra_adma_chan *tdc;
>> +	int i;
>> +
>> +	dma_async_device_unregister(&tdma->dma_dev);
>> +
>> +	for (i = 0; i < tdma->nr_channels; ++i) {
>> +		tdc = &tdma->channels[i];
>> +		tasklet_kill(&tdc->vc.task);
>> +	}
> this is good, but your irq is still active and can fire and thus trigger
> more tasklets!

Ah, yes. Will fix.

Thanks!
Jon

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux