From: Stephen Warren <swarren@xxxxxxxxxx>
In order to avoid any assumptions about any device connected to
P2371-2180's expansion connector, the latest pinmux spreadsheet
configures all muxable pins on that connector to be GPIO inputs, with
on-chip pulls where appropriate.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
configs/p2371-2180.board | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/configs/p2371-2180.board b/configs/p2371-2180.board
index 85de7ec2d318..83a5ea699300 100644
--- a/configs/p2371-2180.board
+++ b/configs/p2371-2180.board
@@ -2,13 +2,13 @@ soc = 'tegra210'
pins = (
#pin, mux, gpio_init, pull, tri, e_inp, od, e_io_hv
- ('aud_mclk_pbb0', 'aud', None, 'none', False, False, False, False),
- ('gpio_x1_aud_pbb3', None, 'out0', 'none', False, False, False, False),
- ('pe6', None, 'in', 'up', False, True, False, False),
- ('dap1_din_pb1', 'i2s1', None, 'none', False, True, False, False),
- ('dap1_dout_pb2', 'i2s1', None, 'none', False, True, False, False),
- ('dap1_fs_pb0', 'i2s1', None, 'none', False, True, False, False),
- ('dap1_sclk_pb3', 'i2s1', None, 'none', False, True, False, False),
+ ('aud_mclk_pbb0', None, 'in', 'up', False, True, False, False),
+ ('gpio_x1_aud_pbb3', None, 'in', 'up', False, True, False, False),
+ ('pe6', None, 'in', 'down', False, True, False, False),
+ ('dap1_din_pb1', None, 'in', 'down', False, True, False, False),
+ ('dap1_dout_pb2', None, 'in', 'down', False, True, False, False),
+ ('dap1_fs_pb0', None, 'in', 'down', False, True, False, False),
+ ('dap1_sclk_pb3', None, 'in', 'down', False, True, False, False),
('pk0', 'i2s5b', None, 'none', False, True, False, False),
('pk1', 'i2s5b', None, 'none', False, True, False, False),
('pk2', 'i2s5b', None, 'none', False, True, False, False),
@@ -21,8 +21,8 @@ pins = (
('dap4_dout_pj6', 'i2s4b', None, 'none', False, True, False, False),
('dap4_fs_pj4', 'i2s4b', None, 'none', False, True, False, False),
('dap4_sclk_pj7', 'i2s4b', None, 'none', False, True, False, False),
- ('dmic3_clk_pe4', 'dmic3', None, 'none', False, False, False, False),
- ('dmic3_dat_pe5', 'dmic3', None, 'up', False, True, False, False),
+ ('dmic3_clk_pe4', None, 'in', 'down', False, True, False, False),
+ ('dmic3_dat_pe5', None, 'in', 'down', False, True, False, False),
('gen1_i2c_scl_pj1', 'i2c1', None, 'none', False, True, False, False),
('gen1_i2c_sda_pj0', 'i2c1', None, 'none', False, True, False, False),
('gen2_i2c_scl_pj2', 'i2c2', None, 'none', False, True, False, True),
@@ -77,8 +77,8 @@ pins = (
('pk7', None, 'in', 'up', False, True, False, False),
('uart1_tx_pu0', 'uarta', None, 'none', False, False, False, False),
('uart1_rx_pu1', 'uarta', None, 'up', False, True, False, False),
- ('uart1_rts_pu2', 'uarta', None, 'none', False, False, False, False),
- ('uart1_cts_pu3', 'uarta', None, 'up', False, True, False, False),
+ ('uart1_rts_pu2', None, 'in', 'down', False, True, False, False),
+ ('uart1_cts_pu3', None, 'in', 'down', False, True, False, False),
('uart3_tx_pd1', 'uartc', None, 'none', False, False, False, False),
('uart3_rx_pd2', 'uartc', None, 'up', False, True, False, False),
('uart3_rts_pd3', 'uartc', None, 'none', False, False, False, False),
@@ -88,15 +88,15 @@ pins = (
('uart2_rts_pg2', 'uartb', None, 'none', False, False, False, False),
('uart2_cts_pg3', 'uartb', None, 'up', False, True, False, False),
('jtag_rtck', 'jtag', None, 'none', False, False, False, False),
- ('als_prox_int_px3', None, 'in', 'up', False, True, False, False),
+ ('als_prox_int_px3', None, 'in', 'down', False, True, False, False),
('motion_int_px2', None, 'in', 'up', False, True, False, False),
('nfc_int_pi1', None, 'in', 'up', False, True, False, False),
- ('ap_wake_nfc_ph7', None, 'out0', 'none', False, False, False, False),
+ ('ap_wake_nfc_ph7', None, 'in', 'down', False, True, False, False),
('gps_en_pi2', None, 'out0', 'none', False, False, False, False),
('ph6', None, 'in', 'up', False, True, False, False),
('pk5', None, 'out0', 'none', False, False, False, False),
('ap_ready_pv5', None, 'out0', 'none', False, False, False, False),
- ('modem_wake_ap_px0', None, 'in', 'up', False, True, False, False),
+ ('modem_wake_ap_px0', None, 'in', 'down', False, True, False, False),
('pk4', None, 'in', 'up', False, True, False, False),
('pk6', None, 'in', 'up', False, True, False, False),
('pl1', None, 'in', 'up', False, True, False, False),
@@ -105,11 +105,11 @@ pins = (
('spi4_miso_pd0', 'spi4', None, 'down', False, True, False, False),
('spi4_sck_pc5', 'spi4', None, 'down', False, True, False, False),
('spi4_cs0_pc6', 'spi4', None, 'up', False, True, False, False),
- ('spi1_mosi_pc0', 'spi1', None, 'down', False, True, False, False),
- ('spi1_miso_pc1', 'spi1', None, 'down', False, True, False, False),
- ('spi1_sck_pc2', 'spi1', None, 'down', False, True, False, False),
- ('spi1_cs0_pc3', 'spi1', None, 'up', False, True, False, False),
- ('spi1_cs1_pc4', 'spi1', None, 'up', False, True, False, False),
+ ('spi1_mosi_pc0', None, 'in', 'down', False, True, False, False),
+ ('spi1_miso_pc1', None, 'in', 'down', False, True, False, False),
+ ('spi1_sck_pc2', None, 'in', 'down', False, True, False, False),
+ ('spi1_cs0_pc3', None, 'in', 'up', False, True, False, False),
+ ('spi1_cs1_pc4', None, 'in', 'up', False, True, False, False),
('spi2_mosi_pb4', 'spi2', None, 'none', False, True, False, False),
('spi2_miso_pb5', 'spi2', None, 'none', False, True, False, False),
('spi2_sck_pb6', 'spi2', None, 'none', False, True, False, False),
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
