On Sun, May 10, 2015 at 08:30:02PM +0200, Lucas Stach wrote:
> This enables the on-module ONFI conformant NAND flash.
>
> Signed-off-by: Lucas Stach <dev@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> index 8e0066a..540b3fd 100644
> --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> @@ -455,6 +455,13 @@
> };
> };
>
> + nand@70008000 {
> + status = "okay";
> + nand-bus-width = <8>;
> + nand-on-flash-bbt;
> + nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
^^ Is write-protect support necessary, or just optional? b/c you didn't
implement support in the NAND driver yet.
> + };
> +
> usb@c5004000 {
> status = "okay";
> nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
