Re: [PATCH V3 15/19] soc: tegra: pmc: Add generic PM domain support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 13, 2015 at 01:39:53PM +0100, Jon Hunter wrote:
> Adds generic PM support to the PMC driver where the PM domains are
> populated from device-tree and the PM domain consumer devices are
> bound to their relevant PM domains via device-tree as well.
> 
> Update the tegra_powergate_power_on_legacy/off_legacy() APIs so that
> internally they call the same tegra_powergate_xxx functions that are
> used by the tegra generic power domain code for consistency.
> 
> This is based upon work by Thierry Reding <treding@xxxxxxxxxx>
> and Vince Hsu <vinceh@xxxxxxxxxx>.
> 
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
>  drivers/soc/tegra/pmc.c                     | 545 +++++++++++++++++++++++++++-
>  include/dt-bindings/power/tegra-powergate.h |  42 +++
>  include/soc/tegra/pmc.h                     |  52 +--
>  3 files changed, 580 insertions(+), 59 deletions(-)
>  create mode 100644 include/dt-bindings/power/tegra-powergate.h
> 
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index 934653785bb7..4de92a9dae65 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -19,8 +19,11 @@
>  
>  #define pr_fmt(fmt) "tegra-pmc: " fmt
>  
> +#include <dt-bindings/power/tegra-powergate.h>
> +
>  #include <linux/kernel.h>
>  #include <linux/clk.h>
> +#include <linux/clk-provider.h>

Why are we now providing clocks?

>  #include <linux/clk/tegra.h>
>  #include <linux/debugfs.h>
>  #include <linux/delay.h>
> @@ -30,17 +33,24 @@
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
>  #include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/of_address.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
>  #include <linux/reboot.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/reset.h>
> +#include <linux/sched.h>

What do we need this for?

>  #include <linux/seq_file.h>
>  #include <linux/spinlock.h>
>  
>  #include <soc/tegra/common.h>
>  #include <soc/tegra/fuse.h>
> +#include <soc/tegra/mc.h>
>  #include <soc/tegra/pmc.h>
>  
> +#define PMC_POWERGATE_ARRAY_MAX		10

There should be no need for this.

> +
>  #define PMC_CNTRL			0x0
>  #define  PMC_CNTRL_SYSCLK_POLARITY	(1 << 10)  /* sys clk polarity */
>  #define  PMC_CNTRL_SYSCLK_OE		(1 << 11)  /* system clock enable */
> @@ -106,6 +116,22 @@
>  
>  #define PMC_PWRGATE_STATE(val, id)	(!!(val & BIT(id)))
>  
> +struct tegra_powergate {
> +	struct generic_pm_domain genpd;
> +	struct tegra_pmc *pmc;
> +	struct tegra_mc *mc;
> +	unsigned int id;
> +	struct list_head node;
> +	struct device_node *of_node;
> +	struct regulator *vdd;
> +	struct clk **clks;
> +	struct reset_control **resets;
> +	const struct tegra_mc_flush **flushes;
> +	u32 num_clks;
> +	u32 num_resets;
> +	u32 num_flushes;

These should be unsigned int, and please group them with the arrays that
they define the sizes of.

> +};
> +
>  struct tegra_pmc_soc {
>  	unsigned int num_powergates;
>  	const char *const *powergates;
> @@ -118,8 +144,10 @@ struct tegra_pmc_soc {
>  
>  /**
>   * struct tegra_pmc - NVIDIA Tegra PMC
> + * @dev: pointer to parent device
>   * @base: pointer to I/O remapped register region
>   * @clk: pointer to pclk clock
> + * @soc: SoC-specific data

This could be a separate patch because it isn't related to the power
domain work.

>   * @rate: currently configured rate of pclk
>   * @suspend_mode: lowest suspend mode available
>   * @cpu_good_time: CPU power good time (in microseconds)
> @@ -133,6 +161,7 @@ struct tegra_pmc_soc {
>   * @cpu_pwr_good_en: CPU power good signal is enabled
>   * @lp0_vec_phys: physical base address of the LP0 warm boot code
>   * @lp0_vec_size: size of the LP0 warm boot code
> + * @powergates_list: list of power gates
>   * @powergates_lock: mutex for power gate register access
>   */
>  struct tegra_pmc {
> @@ -157,6 +186,7 @@ struct tegra_pmc {
>  	u32 lp0_vec_phys;
>  	u32 lp0_vec_size;
>  
> +	struct list_head powergates_list;
>  	struct mutex powergates_lock;
>  };
>  
> @@ -165,6 +195,12 @@ static struct tegra_pmc *pmc = &(struct tegra_pmc) {
>  	.suspend_mode = TEGRA_SUSPEND_NONE,
>  };
>  
> +static inline struct tegra_powergate *
> +to_powergate(struct generic_pm_domain *domain)
> +{
> +	return container_of(domain, struct tegra_powergate, genpd);
> +}
> +
>  static u32 tegra_pmc_readl(unsigned long offset)
>  {
>  	return readl(pmc->base + offset);
> @@ -175,6 +211,37 @@ static void tegra_pmc_writel(u32 value, unsigned long offset)
>  	writel(value, pmc->base + offset);
>  }
>  
> +static int tegra_powergate_get_regulator(struct tegra_powergate *powergate)
> +{
> +	struct platform_device *pdev;
> +
> +	if (powergate->id != TEGRA_POWERGATE_EXT)
> +		return -EINVAL;
> +
> +	pdev = of_find_device_by_node(powergate->of_node);
> +	if (!pdev)
> +		return -EINVAL;
> +
> +	powergate->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
> +	if (IS_ERR(powergate->vdd))
> +		return PTR_ERR(powergate->vdd);
> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_enable_regulator(struct tegra_powergate *powergate)
> +{
> +	int ret = 0;
> +
> +	if (IS_ERR_OR_NULL(powergate->vdd))
> +		ret = tegra_powergate_get_regulator(powergate);

Why don't you get the regulator at the time when the powergate is
created? That way you still have a chance of deferring probe to get
another chance at getting it. If you don't do that, then if ever you
happen to want to enable the powergate before the regulator is ready
you'll error out and your consumer will have to deal with that.

> +
> +	if (!ret)
> +		ret = regulator_enable(powergate->vdd);
> +
> +	return ret;
> +}
> +
>  /**
>   * tegra_powergate_set() - set the state of a partition
>   * @id: partition ID
> @@ -207,6 +274,215 @@ static int tegra_powergate_set(int id, bool new_state, bool wait)
>  	return ret;
>  }
>  
> +static int tegra_powergate_enable(struct tegra_powergate *powergate,
> +				  bool enable)
> +{
> +	if (powergate->id != TEGRA_POWERGATE_EXT)
> +		return tegra_powergate_set(powergate->id, enable, true);
> +
> +	if (enable)
> +		return tegra_powergate_enable_regulator(powergate);
> +	else
> +		return regulator_disable(powergate->vdd);
> +}
> +
> +static bool tegra_powergate_is_supported(int id)
> +{
> +	switch (id) {
> +	case TEGRA_POWERGATE_CPU:
> +	case TEGRA_POWERGATE_CPU1:
> +	case TEGRA_POWERGATE_CPU2:
> +	case TEGRA_POWERGATE_CPU3:
> +	case TEGRA_POWERGATE_CPU0:
> +	case TEGRA_POWERGATE_C0NC:
> +	case TEGRA_POWERGATE_IRAM:
> +		return false;
> +	default:
> +		return true;
> +	}
> +}
> +
> +static bool _tegra_powergate_is_powered(struct tegra_powergate *powergate)
> +{
> +	if (powergate->id != TEGRA_POWERGATE_EXT)
> +		return tegra_powergate_is_powered(powergate->id);
> +
> +	if (IS_ERR(powergate->vdd))
> +		return false;
> +	else
> +		return regulator_is_enabled(powergate->vdd);
> +}
> +
> +static void tegra_powergate_disable_clocks(struct tegra_powergate *powergate)
> +{
> +	int i;

Should match the type of powergate->num_clks, that is unsigned int.

> +
> +	for (i = 0; i < powergate->num_clks; i++)
> +		clk_disable_unprepare(powergate->clks[i]);
> +}
> +
> +static int tegra_powergate_enable_clocks(struct tegra_powergate *powergate)
> +{
> +	int err, i;

Same here.

> +
> +	for (i = 0; i < powergate->num_clks; i++) {
> +		err = clk_prepare_enable(powergate->clks[i]);
> +		if (err)
> +			goto out;
> +	}
> +
> +	return 0;
> +
> +out:
> +	while (i--)
> +		clk_disable_unprepare(powergate->clks[i]);
> +
> +	return err;
> +}
> +
> +static int tegra_powergate_mc_flush(struct tegra_powergate *powergate,
> +				    bool enable)
> +{
> +	int i, err;

And here.

> +
> +	for (i = 0; i < powergate->num_flushes; i++) {
> +		err = tegra_mc_flush(powergate->mc, powergate->flushes[i],
> +				     enable);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_reset_assert(struct tegra_powergate *powergate)
> +{
> +	int err, i;

As well as here.

> +
> +	for (i = 0; i < powergate->num_resets; i++) {
> +		err = reset_control_assert(powergate->resets[i]);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_reset_deassert(struct tegra_powergate *powergate)
> +{
> +	int err, i;
> +
> +	for (i = 0; i < powergate->num_resets; i++) {
> +		err = reset_control_deassert(powergate->resets[i]);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_seq_power_up(struct tegra_powergate *powergate)

What does the _seq buy us here? Why not simply call this
tegra_powergate_power_up()?

> +{
> +	int err;
> +
> +	err = tegra_powergate_reset_assert(powergate);
> +	if (err)
> +		goto out;
> +	udelay(10);

There should be a space between the above two lines. Also, is there a
reason why we can't use usleep_range() here?

> +
> +	err = tegra_powergate_enable(powergate, true);
> +	if (err < 0)
> +		goto out;
> +	udelay(10);
> +
> +	err = tegra_powergate_enable_clocks(powergate);
> +	if (err)
> +		goto out;
> +	udelay(10);
> +
> +	tegra_powergate_remove_clamping(powergate->id);
> +
> +	udelay(10);
> +
> +	err = tegra_powergate_reset_deassert(powergate);
> +	if (err)
> +		goto out;
> +	udelay(10);
> +
> +	err = tegra_powergate_mc_flush(powergate, false);
> +	if (err)
> +		goto out;

I mentioned this before, but I think it'd be good to split out the flush
changes from this patch, so that we can test the series without the
flushing to see if it's at all necessary.

> +static int tegra_genpd_power_on(struct generic_pm_domain *domain)
> +{
> +	struct tegra_powergate *powergate = to_powergate(domain);
> +	struct tegra_pmc *pmc = powergate->pmc;
> +	int err;
> +
> +	err = tegra_powergate_seq_power_up(powergate);
> +
> +	if (err)

There should be no blank line between the above.

> +		dev_err(pmc->dev, "Failed to turn on PM Domain (%d)\n", err);

For consistency with other error messages, "Failed" should be "failed".
And "Domain" should be "domain". Also typically the error is separated
from the message with a colon: "failed ... domain: %d\n".

> -int tegra_powergate_power_off_legacy(int id, struct clk *clk,
> -				     struct reset_control *rst)
> +int tegra_powergate_power_on_legacy(int id, struct clk *clk,
> +				    struct reset_control *rst)
>  {
> -	int ret;
> +	struct tegra_powergate powergate;
>  
> -	ret = clk_prepare_enable(clk);
> -	if (ret)
> -		return ret;
> +	if (!pmc->soc || id < 0 || id >= pmc->soc->num_powergates)
> +		return -EINVAL;
>  
> -	usleep_range(10, 20);
> +	powergate.id = id;
> +	powergate.clks = &clk;
> +	powergate.resets = &rst;
> +	powergate.num_clks = 1;
> +	powergate.num_resets = 1;
> +	powergate.num_flushes = 0;
>  
> -	reset_control_assert(rst);
> +	return tegra_powergate_seq_power_up(&powergate);
> +}
> +EXPORT_SYMBOL(tegra_powergate_power_on_legacy);
>  
> -	usleep_range(10, 20);
> +int tegra_powergate_power_off_legacy(int id, struct clk *clk,
> +				     struct reset_control *rst)
> +{
> +	struct tegra_powergate powergate;
>  
> -	clk_disable_unprepare(clk);
> +	if (!pmc->soc || id < 0 || id >= pmc->soc->num_powergates)
> +		return -EINVAL;
>  
> -	usleep_range(10, 20);
> +	powergate.id = id;
> +	powergate.clks = &clk;
> +	powergate.resets = &rst;
> +	powergate.num_clks = 1;
> +	powergate.num_resets = 1;
> +	powergate.num_flushes = 0;
>  
> -	return tegra_powergate_power_off(id);
> +	return tegra_powergate_seq_power_down(&powergate);
>  }
>  EXPORT_SYMBOL(tegra_powergate_power_off_legacy);

It looks as if you decided to reorder the two functions here, but that
makes the diff very hard to read.

>  
> @@ -493,6 +786,228 @@ static int tegra_powergate_debugfs_init(void)
>  	return 0;
>  }
>  
> +static int tegra_powergate_of_get_clks(struct device *dev,
> +				       struct tegra_powergate *powergate)
> +{
> +	struct clk *clks[PMC_POWERGATE_ARRAY_MAX];
> +	int i = 0;

unsigned int, and no need to initialize here.

> +
> +	for (i = 0; i < PMC_POWERGATE_ARRAY_MAX; i++) {
> +		clks[i] = of_clk_get(powergate->of_node, i);
> +		if (IS_ERR(clks[i])) {
> +			if (PTR_ERR(clks[i]) != -ENOENT)
> +				return PTR_ERR(clks[i]);
> +			break;
> +		}
> +	}

Can we perhaps prepend this with a loop that determines the number of
clocks specified in DT? That way we can avoid the statically sized array
altogether.

Perhaps to make it a little easier to read, keep a local variable clk
and assign to the array only when it's been sanitized:

	for (...) {
		clk = of_clk_get(...);
		if (IS_ERR(clk)) {
			...
		}

		powergate->clks[i] = clk;
	}

> +
> +	if (PTR_ERR(clks[i]) != -ENOENT) {
> +		dev_err(dev, "unsupported number of clocks defined\n");
> +		return -EINVAL;
> +	}
> +
> +	powergate->clks = devm_kcalloc(dev, i, sizeof(*clks), GFP_KERNEL);
> +	if (!powergate->clks)
> +		return -ENOMEM;
> +
> +	memcpy(powergate->clks, clks, sizeof(*clks) * i);
> +	powergate->num_clks = i;
> +
> +	return 0;
> +}

Don't you need to put the clocks that you've obtained above to avoid
leaking them?

> +
> +static int tegra_powergate_of_get_resets(struct device *dev,
> +					 struct tegra_powergate *powergate)
> +{
> +	struct reset_control *rsts[PMC_POWERGATE_ARRAY_MAX];
> +	int i = 0;
> +
> +	for (i = 0; i < PMC_POWERGATE_ARRAY_MAX; i++) {
> +		rsts[i] = of_reset_control_get_by_index(powergate->of_node, i);
> +		if (IS_ERR(rsts[i])) {
> +			if (PTR_ERR(rsts[i]) != -ENOENT)
> +				return PTR_ERR(rsts[i]);
> +			break;
> +		}
> +	}
> +
> +	if (PTR_ERR(rsts[i]) != -ENOENT) {
> +		dev_err(dev, "unsupported number of resets defined\n");
> +		return -EINVAL;
> +	}
> +
> +	powergate->resets = devm_kcalloc(dev, i, sizeof(*rsts), GFP_KERNEL);
> +	if (!powergate->resets)
> +		return -ENOMEM;
> +
> +	memcpy(powergate->resets, rsts, sizeof(*rsts) * i);
> +	powergate->num_resets = i;
> +
> +	return 0;
> +}

Same comments as for clocks.

> +static int tegra_powergate_of_get_mc_flush(struct device *dev,
> +					   struct tegra_powergate *powergate)
> +{
> +	struct platform_device *pdev;
> +	struct of_phandle_args args;
> +	int i = 0, ret = 0;
> +
> +	ret = of_parse_phandle_with_args(dev->of_node, "nvidia-swgroups",
> +					"#nvidia,swgroup-cells", 0, &args);
> +	if (ret < 0) {
> +		/*
> +		 * The nvidia-swgroups property is
> +		 * optional and so if missing simply return.
> +		 */
> +		if (ret == -ENOENT)
> +			return 0;
> +
> +		dev_err(dev, "nvidia-swgroups property invalid for %s (%d)\n",
> +			powergate->of_node->name, ret);
> +		return ret;
> +	}
> +
> +	powergate->flushes = devm_kcalloc(dev, args.args_count,
> +					  sizeof(powergate->flushes),
> +					  GFP_KERNEL);
> +	if (!powergate->flushes) {
> +		dev_err(dev, "failed to allocate memory for powergate flush\n");
> +		return -ENOMEM;
> +	}
> +
> +	pdev = of_find_device_by_node(args.np);
> +	if (!pdev)
> +		return -ENODEV;
> +
> +	powergate->mc = platform_get_drvdata(pdev);
> +	if (!powergate->mc)
> +		return -EINVAL;
> +
> +	for (i = 0; i < args.args_count; i++) {
> +		powergate->flushes[i] = tegra_mc_flush_get(powergate->mc,
> +							   args.args[i]);

Urgs... might be better to make this a struct device *-based API, so
that you don't have to reach into the private structures of the MC
driver. Well, it'd technically have to be struct device_node *-based
because we don't have a struct device * for the power domains. Perhaps
something like this:

	const struct tegra_mc_flush *tegra_mc_flush_get(struct device_node *np,
							unsigned int index);

Then the MC driver can access its own internals, rather than the other
way around.

> +		if (!powergate->flushes[i])
> +			return -EINVAL;
> +	}
> +
> +	powergate->num_flushes = args.args_count;
> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_init_powerdomain(struct tegra_pmc *pmc,
> +					    struct device_node *np,
> +					    struct tegra_powergate *pg)

This is slightly confusing. Why not something like this:

	struct tegra_powergate *tegra_powergate_create(struct tegra_pmc *pmc,
						       struct device_node *np)

?

> +{
> +	bool off;
> +	int err;
> +
> +	err = of_property_read_u32(np, "nvidia,powergate", &pg->id);
> +	if (err) {
> +		dev_err(pmc->dev, "no powergate ID for domain\n");
> +		goto err;
> +	}
> +
> +	if (tegra_powergate_is_supported(pg->id) == false) {
> +		dev_warn(pmc->dev, "%s not currently supported by genpd\n",
> +			 np->name);
> +		return -EINVAL;
> +	}
> +
> +	if (pg->id == TEGRA_POWERGATE_EXT) {
> +		err = tegra_powergate_get_regulator(pg);
> +		if (err) {
> +			/*
> +			 * The regulator might not be ready yet, so just
> +			 * give a warning instead of failing the whole
> +			 * init.
> +			 */
> +			dev_warn(pmc->dev, "couldn't locate regulator\n");

Why won't regular probe deferral work?

> +		}
> +	}
> +
> +	pg->of_node = np;
> +	pg->genpd.name = np->name;
> +	pg->genpd.power_off = tegra_genpd_power_off;
> +	pg->genpd.power_on = tegra_genpd_power_on;
> +	pg->pmc = pmc;
> +
> +	err = tegra_powergate_of_get_clks(pmc->dev, pg);
> +	if (err)
> +		goto err;
> +
> +	err = tegra_powergate_of_get_resets(pmc->dev, pg);
> +	if (err)
> +		goto err;
> +
> +	err = tegra_powergate_of_get_mc_flush(pmc->dev, pg);
> +	if (err)
> +		goto err;
> +
> +	list_add_tail(&pg->node, &pmc->powergates_list);
> +
> +	if (!IS_ERR(pg->vdd) || pg->id != TEGRA_POWERGATE_EXT)
> +		tegra_genpd_power_off(&pg->genpd);
> +
> +	off = !_tegra_powergate_is_powered(pg);
> +
> +	pm_genpd_init(&pg->genpd, NULL, off);
> +
> +	dev_info(pmc->dev, "added power domain %s\n", np->name);
> +
> +	return 0;
> +
> +err:
> +	dev_err(pmc->dev, "failed to add power domain for node %s\n",
> +		np->name);
> +	return err;

This doesn't clean up any of the requested resources on failure.

> +}
> +
> +static int tegra_powergate_add_powerdomains(struct tegra_pmc *pmc,
> +					    struct device_node *parent,
> +					    struct generic_pm_domain *pd_parent)
> +{
> +	struct device_node *np;
> +	int ret;

Please use err consistently as the name for error codes. This patch uses
a mixture of both.

> +
> +	for_each_child_of_node(parent, np) {
> +		struct tegra_powergate *pg;
> +
> +		pg = devm_kzalloc(pmc->dev, sizeof(*pg), GFP_KERNEL);
> +		if (!pg)
> +			return -ENOMEM;
> +
> +		ret = tegra_powergate_init_powerdomain(pmc, np, pg);
> +		if (ret)
> +			return ret;
> +
> +		if (pd_parent)
> +			pm_genpd_add_subdomain(pd_parent, &pg->genpd);
> +
> +		of_genpd_add_provider_simple(np, &pg->genpd);
> +
> +		tegra_powergate_add_powerdomains(pmc, np, &pg->genpd);
> +	}

Nice, I like the recursive nature of this and how it matches up well
with the Tegra hardware.

> +
> +	return 0;
> +}
> +
> +static int tegra_powergate_init(struct tegra_pmc *pmc)
> +{
> +	struct device_node *np;
> +
> +	INIT_LIST_HEAD(&pmc->powergates_list);
> +
> +	np = of_get_child_by_name(pmc->dev->of_node, "pm-domains");
> +	if (!np) {
> +		dev_dbg(pmc->dev, "power-domains node not found\n");
> +		return 0;
> +	}
> +
> +	return tegra_powergate_add_powerdomains(pmc, np, NULL);
> +}
> +
>  static int tegra_io_rail_prepare(int id, unsigned long *request,
>  				 unsigned long *status, unsigned int *bit)
>  {
> @@ -875,6 +1390,12 @@ static int tegra_pmc_probe(struct platform_device *pdev)
>  
>  	tegra_pmc_init_tsense_reset(pmc);
>  
> +	if (IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) {
> +		err = tegra_powergate_init(pmc);
> +		if (err < 0)
> +			return err;
> +	}
> +
>  	if (IS_ENABLED(CONFIG_DEBUG_FS)) {
>  		err = tegra_powergate_debugfs_init();
>  		if (err < 0)
> diff --git a/include/dt-bindings/power/tegra-powergate.h b/include/dt-bindings/power/tegra-powergate.h
> new file mode 100644
> index 000000000000..b1d51f028a99
> --- /dev/null
> +++ b/include/dt-bindings/power/tegra-powergate.h
> @@ -0,0 +1,42 @@
> +#ifndef _DT_BINDINGS_POWER_TEGRA_POWERGATE_H
> +#define _DT_BINDINGS_POWER_TEGRA_POWERGATE_H
> +
> +#define TEGRA_POWERGATE_CPU	0
> +#define TEGRA_POWERGATE_3D	1
> +#define TEGRA_POWERGATE_VENC	2
> +#define TEGRA_POWERGATE_PCIE	3
> +#define TEGRA_POWERGATE_VDEC	4
> +#define TEGRA_POWERGATE_L2	5
> +#define TEGRA_POWERGATE_MPE	6
> +#define TEGRA_POWERGATE_HEG	7
> +#define TEGRA_POWERGATE_SATA	8
> +#define TEGRA_POWERGATE_CPU1	9
> +#define TEGRA_POWERGATE_CPU2	10
> +#define TEGRA_POWERGATE_CPU3	11
> +#define TEGRA_POWERGATE_CELP	12
> +#define TEGRA_POWERGATE_3D1	13
> +#define TEGRA_POWERGATE_CPU0	14
> +#define TEGRA_POWERGATE_C0NC	15
> +#define TEGRA_POWERGATE_C1NC	16
> +#define TEGRA_POWERGATE_SOR	17
> +#define TEGRA_POWERGATE_DIS	18
> +#define TEGRA_POWERGATE_DISB	19
> +#define TEGRA_POWERGATE_XUSBA	20
> +#define TEGRA_POWERGATE_XUSBB	21
> +#define TEGRA_POWERGATE_XUSBC	22
> +#define TEGRA_POWERGATE_VIC	23
> +#define TEGRA_POWERGATE_IRAM	24
> +#define TEGRA_POWERGATE_NVDEC	25
> +#define TEGRA_POWERGATE_NVJPG	26
> +#define TEGRA_POWERGATE_AUD	27
> +#define TEGRA_POWERGATE_DFD	28
> +#define TEGRA_POWERGATE_VE2	29
> +
> +/*
> + * Pseudo powergate for power-domains that are power-gated externally.
> + * Make this a large number to allow other powergates to be added.
> + */
> +#define TEGRA_POWERGATE_EXT	1000

Can't we simply cover this case by not specifying the nvidia,powergate
property in the first place? Or make it conditional on the existence of
a vdd-supply property.

> +
> +

There's a gratuitous blank line here.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux