From: Thierry Reding <treding@xxxxxxxxxx>
Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsability of the bootloader to enable it if the
VPR registers have been programmed such as the GPU can operate.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-venice2.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 5c3f7813360d..497a50ebfe44 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -43,6 +43,14 @@
};
};
+ gpu@0,57000000 {
+ /*
+ * Node left disabled on purpose - the bootloader will enable
+ * it after having set the VPR up
+ */
+ vdd-supply = <&vdd_gpu>;
+ };
+
pinmux: pinmux@0,70000868 {
pinctrl-names = "boot";
pinctrl-0 = <&pinmux_boot>;
@@ -735,7 +743,7 @@
regulator-always-on;
};
- sd6 {
+ vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
