On 19/05/15 09:12, Russell King wrote: > All ARMv5 and older CPUs invalidate their caches in the early assembly > setup function, prior to enabling the MMU. This is because the L1 > cache should not contain any data relevant to the execution of the > kernel at this point; all data should have been flushed out to memory. > > This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, > these typically do not search their caches when caching is disabled (as > it needs to be when the MMU is disabled) so this change should be safe. > > ARMv7 allows there to be CPUs which search their caches while caching is > disabled, and it's permitted that the cache is uninitialised at boot; > for these, the architecture reference manual requires that an > implementation specific code sequence is used immediately after reset > to ensure that the cache is placed into a sane state. Such > functionality is definitely outside the remit of the Linux kernel, and > must be done by the SoC's firmware before _any_ CPU gets to the Linux > kernel. > > Changing the data cache clean+invalidate to a mere invalidate allows us > to get rid of a lot of platform specific hacks around this issue for > their secondary CPU bringup paths - some of which were buggy. For brcmstb: Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx> -- Florian -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
