From: Bill Huang <bilhuang@xxxxxxxxxx> Add some logic for Spread Spectrum control. It is used in conjuncture with SDM fractional dividers. SSC has to be disabled when we configure the divider settings. Signed-off-by: Bill Huang <bilhuang@xxxxxxxxxx> --- v5: - Reorderd Patch so set_defaults logic is present already drivers/clk/tegra/clk-pll.c | 25 ++++++++++++++++++++++++- drivers/clk/tegra/clk.h | 4 ++++ 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 36aa2a95fac0..727fedff824d 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -648,6 +648,26 @@ static void _update_pll_cpcon(struct tegra_clk_pll *pll, pll_writel_misc(val, pll); } +static void pll_clk_start_ss(struct tegra_clk_pll *pll) +{ + if (pll->params->defaults_set && pll->params->ssc_ctrl_en_mask) { + u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll); + + val |= pll->params->ssc_ctrl_en_mask; + pll_writel(val, pll->params->ssc_ctrl_reg, pll); + } +} + +static void pll_clk_stop_ss(struct tegra_clk_pll *pll) +{ + if (pll->params->defaults_set && pll->params->ssc_ctrl_en_mask) { + u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll); + + val &= ~pll->params->ssc_ctrl_en_mask; + pll_writel(val, pll->params->ssc_ctrl_reg, pll); + } +} + static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, unsigned long rate) { @@ -666,8 +686,10 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, return 0; } - if (state) + if (state) { + pll_clk_stop_ss(pll); _clk_pll_disable(hw); + } if (!pll->params->defaults_set && pll->params->set_defaults) pll->params->set_defaults(pll); @@ -680,6 +702,7 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, if (state) { _clk_pll_enable(hw); ret = clk_pll_wait_for_lock(pll); + pll_clk_start_ss(pll); } return ret; diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 38b4c95cfb2f..32ce32a056ca 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -184,6 +184,8 @@ struct tegra_clk_pll; * @sdm_din_mask: Mask of SDM divider bits * @sdm_ctrl_reg: Register offset where SDM enable is * @sdm_ctrl_en_mask: Mask of SDM enable bit + * @ssc_ctrl_reg: Register offset where SSC settings are + * @ssc_ctrl_en_mask: Mask of SSC enable bit * @aux_reg: AUX register offset * @dyn_ramp_reg: Dynamic ramp control register offset * @ext_misc_reg: Miscellaneous control register offsets @@ -251,6 +253,8 @@ struct tegra_clk_pll_params { u32 sdm_din_mask; u32 sdm_ctrl_reg; u32 sdm_ctrl_en_mask; + u32 ssc_ctrl_reg; + u32 ssc_ctrl_en_mask; u32 aux_reg; u32 dyn_ramp_reg; u32 ext_misc_reg[MAX_PLL_MISC_REG_COUNT]; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html