On 5/7/2015 6:39 AM, Jim Lin wrote: > On 05/05/2015 12:37 AM, Rhyland Klein wrote: >> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c >> new file mode 100644 >> index 000000000000..07382a473e22 >> --- /dev/null >> +++ b/drivers/clk/tegra/clk-tegra210.c >> @@ -0,0 +1,2761 @@ >> +/* >> + * Copyright (c) 2012-2014 NVIDIA CORPORATION. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#include <linux/io.h> >> +#include <linux/clk.h> >> +#include <linux/clk-provider.h> >> +#include <linux/clkdev.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/delay.h> >> +#include <linux/export.h> >> +#include <linux/clk/tegra.h> >> +#include <dt-bindings/clock/tegra210-car.h> >> + >> +#include "clk.h" >> +#include "clk-id.h" >> + >> +/* >> + * TEGRA210_CAR_BANK_COUNT: the number of peripheral clock register >> + * banks present in the Tegra210 CAR IP block. The banks are >> + * identified by single letters, e.g.: L, H, U, V, W, X, Y. See >> + * periph_regs[] in drivers/clk/tegra/clk.c >> + */ >> +#define TEGRA210_CAR_BANK_COUNT 7 >> + >> +#define CLK_SOURCE_CSITE 0x1d4 >> +#define CLK_SOURCE_EMC 0x19c >> + >> +#define PLLC_BASE 0x80 >> +#define PLLC_OUT 0x84 >> +#define PLLC_MISC0 0x88 >> +#define PLLC_MISC1 0x8c >> +#define PLLC_MISC2 0x5d0 >> +#define PLLC_MISC3 0x5d4 >> + >> +#define PLLC2_BASE 0x4e8 >> +#define PLLC2_MISC0 0x4ec >> +#define PLLC2_MISC1 0x4f0 >> +#define PLLC2_MISC2 0x4f4 >> +#define PLLC2_MISC3 0x4f8 >> + >> +#define PLLC3_BASE 0x4fc >> +#define PLLC3_MISC0 0x500 >> +#define PLLC3_MISC1 0x504 >> +#define PLLC3_MISC2 0x508 >> +#define PLLC3_MISC3 0x50c >> + >> +#define PLLM_BASE 0x90 >> +#define PLLM_MISC0 0x9c >> +#define PLLM_MISC1 0x98 >> +#define PLLP_BASE 0xa0 >> +#define PLLP_MISC0 0xac >> +#define PLLP_MISC1 0x680 >> +#define PLLA_BASE 0xb0 >> +#define PLLA_MISC0 0xbc >> +#define PLLA_MISC1 0xb8 >> +#define PLLA_MISC2 0x5d8 >> +#define PLLD_BASE 0xd0 >> +#define PLLD_MISC0 0xdc >> +#define PLLD_MISC1 0xd8 >> +#define PLLU_BASE 0xc0 >> +#define PLLU_OUTA 0xc4 >> +#define PLLU_MISC0 0xcc >> +#define PLLU_MISC1 0xc8 >> +#define PLLX_BASE 0xe0 >> +#define PLLX_MISC0 0xe4 >> +#define PLLX_MISC1 0x510 >> +#define PLLX_MISC2 0x514 >> +#define PLLX_MISC3 0x518 >> +#define PLLX_MISC4 0x5f0 >> +#define PLLX_MISC5 0x5f4 >> +#define PLLE_BASE 0xe8 >> +#define PLLE_MISC0 0xec >> +#define PLLD2_BASE 0x4b8 >> +#define PLLD2_MISC0 0x4bc >> +#define PLLD2_MISC1 0x570 >> +#define PLLD2_MISC2 0x574 >> +#define PLLD2_MISC3 0x578 >> +#define PLLE_AUX 0x48c >> +#define PLLRE_BASE 0x4c4 >> +#define PLLRE_MISC0 0x4c8 >> +#define PLLDP_BASE 0x590 >> +#define PLLDP_MISC 0x594 >> + >> +#define PLLC4_BASE 0x5a4 >> +#define PLLC4_MISC0 0x5a8 >> +#define PLLC4_OUT 0x5e4 >> +#define PLLMB_BASE 0x5e8 >> +#define PLLMB_MISC0 0x5ec >> +#define PLLA1_BASE 0x6a4 >> +#define PLLA1_MISC0 0x6a8 >> +#define PLLA1_MISC1 0x6ac >> +#define PLLA1_MISC2 0x6b0 >> +#define PLLA1_MISC3 0x6b4 >> + >> +#define PLLU_IDDQ_BIT 31 >> +#define PLLCX_IDDQ_BIT 27 >> +#define PLLRE_IDDQ_BIT 24 >> +#define PLLA_IDDQ_BIT 25 >> +#define PLLD_IDDQ_BIT 20 >> +#define PLLSS_IDDQ_BIT 18 >> +#define PLLM_IDDQ_BIT 5 >> +#define PLLMB_IDDQ_BIT 17 >> +#define PLLXP_IDDQ_BIT 3 >> + >> +#define PLLCX_RESET_BIT 30 >> + >> +#define PLL_BASE_LOCK BIT(27) >> +#define PLLCX_BASE_LOCK BIT(26) >> +#define PLLE_MISC_LOCK BIT(11) >> +#define PLLRE_MISC_LOCK BIT(27) >> + >> +#define PLL_MISC_LOCK_ENABLE 18 >> +#define PLLC_MISC_LOCK_ENABLE 24 >> +#define PLLDU_MISC_LOCK_ENABLE 22 >> +#define PLLU_MISC_LOCK_ENABLE 29 >> +#define PLLE_MISC_LOCK_ENABLE 9 >> +#define PLLRE_MISC_LOCK_ENABLE 30 >> +#define PLLSS_MISC_LOCK_ENABLE 30 >> +#define PLLP_MISC_LOCK_ENABLE 18 >> +#define PLLM_MISC_LOCK_ENABLE 4 >> +#define PLLMB_MISC_LOCK_ENABLE 16 >> +#define PLLA_MISC_LOCK_ENABLE 28 >> +#define PLLU_MISC_LOCK_ENABLE 29 >> +#define PLLD_MISC_LOCK_ENABLE 18 >> + >> +#define PLLA_SDM_DIN_MASK 0xffff >> +#define PLLA_SDM_EN_MASK BIT(26) >> + >> +#define PLLD_SDM_EN_MASK BIT(16) >> + >> +#define PLLD2_SDM_EN_MASK BIT(31) >> +#define PLLD2_SSC_EN_MASK BIT(30) >> + >> +#define PLLDP_SS_CFG 0x598 >> +#define PLLDP_SDM_EN_MASK BIT(31) >> +#define PLLDP_SSC_EN_MASK BIT(30) >> +#define PLLDP_SS_CTRL1 0x59c >> +#define PLLDP_SS_CTRL2 0x5a0 >> + >> +#define PMC_PLLM_WB0_OVERRIDE 0x1dc >> +#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 >> + >> +#define UTMIP_PLL_CFG2 0x488 >> +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) > This line should be corrected as > > +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) > > STABLE_COUNT has 12 bits. Indeed, good catch! > >> +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) >> +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) >> +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) >> +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) >> + >> +#define UTMIP_PLL_CFG1 0x484 >> +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) > This line should be corrected as > > +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) > > ENABLE_DLY_COUNT starts from bit 27. > > Yep. Thanks Jim! -rhyland > > --nvpublic > -- nvpublic -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
